ICPE2024 Copyright Policy

Copyright on an ICPE2024 paper is retained by the author(s) of the paper.
No part of the paper may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior permission from the author(s) of the paper.
Author(s) grant the ICPE2024 Conference Committee the right to include the paper in the ICPE2024 Conference Proceedings (electronic version stored in the ICPE2024 Digital Information Center ), which will be opened for view by ICPE2024 participants until 26 November, 2024.
Any accepted paper to the ICPE2024 Conference Proceedings was reviewed by at least two reviews and is recognized as a peer-reviewed full-length paper.
To avoid any possible problems with the copyright of publications, the ICPE2024 Conference Proceedings will not be published on-line by the ICPE2024 Conference Committee nor by any third party (will not be indexed in any databases such as SCI, Scopus, and EI). The manuscripts can only be viewd by the ICPE2024 participants in the Digital Information Center. The manuscripts cannot be printed and downloaded.
No part of the ICPE2024 Conference Proceedings may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior permission from the ICPE2024 Conference Committee.
Some of the full papers will be recommended, based on the quality and field of the paper, for submission to ICPE2024 special issues of journals in the related fields. See Plan for ICPE2024-Journal Special Issues.

Instructions for submission of Camera-ready Manuscript

The contents of Camera-ready Manuscript should be modified based on the comments of reviewers, and its format should be complied with the following templates.

Manuscript Templates:

Short paper_2 pages

Full paper_4 pages

Full paper_6 pages

The Camera-ready Manuscript will be included into the conference proceedings. An electronic version of conference proceedings will be provided in the conference. For more information, see ICPE2024 Copyright Policy.

Some of the papers will be recommended, based on the quality and field of the paper, for submission to ICPE2024 special issues of journals in the related fields. The planned special issues (in journals) are as follows. Please note the names of the special issues are provisional and could possibly change.

Advanced Nanomanufacturing and Metrology (in Nanomanufacturing and Metrology)
Measurement Science and Technology in Precision Engineering (in Measurement Science and Technology)
Precision Engineering for Advanced Automation Technology (in International Journal of Automation Technology)
Precision Engineering for Advanced Manufacturing Technology (in The International Journal of Advanced Manufacturing Technology)
State-of-the-art Technologies in Precision Engineering (in Precision Engineering)

Young Researcher Awards (candidates are the first author and presenter of a paper with age under 35), Best Paper Awards, Best Poster Awards of ICPE2024 will be selected from the full papers.

List of Sessions and Session Organizers

Organized Sessions

Session Code	Session	Organizer
OS01	Digital design and manufacturing systems	Keiichi Nakamoto, Tokyou University of Agriculture and Technology Hideki Aoyama, Keio University Haruhiko Suwa, Setsunan University Toshitake Tateno, Meiji University Fumiki Tanaka, Hokkaido University Hidetake Tanaka, Sophia University Hiroyuki Kodama, Okayama University
OS02	Life cycle and smart engineering	Yasushi Umeda, The University of Tokyo Yusuke Kishita, The University of Tokyo
OS03	Advanced system design and applications	Toshiya Kaihara, Kobe University Masahiko Onosato, Hokkaido University Koji Iwamura, Osaka Metropolitan University Yoshiki Shimomura, Tokyo Metropolitan University Yutaka Nomaguchi, Osaka University Akira Tsumaya, Okayama Prefectural University
OS04	CAD/CAM technologies	Kouichi Morishige, The University of Electro-Communications Jun'ichi Kaneko, Saitama University Isamu Nishida, Kobe University Koichi Kikkawa, Kyushu Instutite of Technology Keigo Takasugi, Kanazawa University
OS05	Advanced cutting technologies	Takashi Matsumura, Tokyo Denki University Hiroyuki Sasahara, Tokyou University of Agriculture and Technology Katsuhiko Sakai, Shizuoka University Naohiko Sugita, The University of Tokyo Masato Okada, University of Fukui Katsuhiko Sekiya, Hiroshima University Norikazu Suzuki, Chuo University
OS06	Advanced grinding technologies	Lin Weimin, Gunma University Kazuhito Ohashi, Okayama University Hitoshi Ohmori, RIKEN Kazutoshi Katahira, RIKEN Naohiro Nishikawa, Iwate University Takayuki Kitajima, National Defense Academy of Japan Libo Zhou, Ibaraki University Keishi Yamaguchi, Kyoto Institute of Technology Takazo Yamada, Nihon University
OS07	Micro/Nano machining and figurings	Jiwang Yan, Keio University Kazuto Yamauchi, Osaka University Yutaka Yamagata, RIKEN Hirofumi Suzuki, Chubu Univeristy Keita Shimada, Nihon University Shuhei Kodama, Tokyo City University Keishi Yamaguchi, Kyoto Institute of Technology
OS08	Nano-scale surface finishing	Syuhei Kurokawa, Kyushu University Hirokuni Hiyama, Ebara Corporation Michio Uneda, Kanazawa Institute of Technology Hitoshi Morinaga, FUJIMI FUJIMI Incorporated Kazuya Yamamura, Osaka University Jyunji Murata, Ritsumeikan University Yanhua Zou, Utsunomiya University Akihisa Kubota, Kumamoto University Urara Satake, Osaka University
OS09	Non-traditional machining and additive manufacturing	Tatsuaki Furumoto, Kanazawa University Kensei Kaneko, National Institute of Technology (KOSEN), Nagaoka College Toshiki Niino, The University of Tokyo Takeyuki Abe, Saitama University Tomohiro Koyano, Kanazawa University Ryo Koike, Keio University
OS10	Energy beam processing	Hirofumi Hidai, Chiba University Yasuhiro Okamoto, Okayama University Mitsugu Yamaguchi, Kanazawa University Yusuke Ito, The University of Tokyo Yuko Aono, Tokyo Institute of Technology
OS11	Advanced machine tools and elements	Yoshitaka Morimoto, Kanazawa Institute of Technology Keiichi Shirase, Kobe University Toshiki Niino, The University of Tokyo Yukitoshi Ihara, Osaka Institute of Technology Yohichi Nakao, Kanagawa University Yasuhiro Kakinuma, Keio University Ryuta Sato, Nagoya University Atsushi Matsubara, Kyoto University
OS12	Micro / Nano systems	Yuichi Nakazato, Nihon Insitutute of Technology Takahiro Ito, Kyushu Instutite of Technology Shinsuke Matsui, Chiba Institute of Technology Hidetsugu Terada, University of Yamanashi
OS13	Robotics and mechatronics	Naoki Asakawa, Kanazawa University Hiroaki Seki, Kanazawa University Toshiki Hirogaki, Doshisha University Daisuke Matsuura, Tokyo Institute of Technology
OS14	Ultra precision controls	Tadahiko Shinshi, Tokyo Institute of Technology Masaya Takasaki, Saitama University Takeshi Morita, The University of Tokyo Katsushi Furutani, Toyota Technological Institute
OS15	Nano-scale measurements and calibrations	Yasuhiro Takaya, Osaka University Masaki Michihata, The University of Tokyo Soichi Ibaraki, Hiroshima University Terutake Hayashi, Kyushu University Panart Khajornrungruang, Kyushu Instutite of Technology So Ito, Toyama Prefectural University Ichiro Yoshida, Hosei University Yusuke Kajihara, The University of Tokyo Osamu Sato, AIST Hiraku Matsukuma, Tohoku University Yuki Shimizu, Hokkaido University
OS16	Science and applications of nanostructure formation	Kenta Arima, Osaka University Jun Taniguchi, Tokyo University of Science Kimihisa Matsumoto, Toyama Prefectural University Masaki Michihata, The University of Tokyo
OS17	Mechano-photonics engineering and optical applications	Yukitoshi Otani, Utsunomiya University Yasuhiko Arai, Kansai University Toshiyuki Takatsuji, AIST Ichiro Ishimaru, Kagawa University Lianhua Jin, University of Yamanashi Motoharu Fujigaki, University of Fukui Masato Aketagawa, Nagaoka University of Technology Yusuke Kajihara, The University of Tokyo Masaki Michihata, The University of Tokyo
OS18	Advanced image processings and applications	Takashi Komuro, Saitama University Sarthak Pathak, Chuo University Akio Nakamura, Tokyo Denki University
OS19	Advanced 3 dimensional digital processing	Yutaka Ohtake, The University of Tokyo Hiroaki Date, Hokkaido University Hiroshi Masuda, The University of Electro-Communications Tomohiro Mizoguchi, Nihon University Yukie Nagai, Tokyo Metropolitan University
OS20	Advanced surface processing	Hiroaki Kakiuchi, Osaka University Naoto Ohtake, Tokyo Institute of Technology Yoshifumi Suzaki, Kagawa University Shozo Inoue, University of Hyogo
OS21	Micro fabrications for functional surfaces	Jun Shimizu, Ibaraki University Masahiko Yoshino, Tokyo Institute of Technology Arata Kaneko, Tokyo Metropolitan University Masanori Hayase, Tokyo University of Science Motoki Terano, Okayama University of Science
OS22	MEMS/NEMS	Takayuki Shibata, Toyohashi University of Technology Toshihiro Itoh, The University of Tokyo Kazuyoshi Tsuchiya, Tokai University Beomjoon Kim, The University of Tokyo Sung-Won YOUN, AIST Nobuhiro Kato, Kindai University
OS23	Bio-medical engineering and applications	Ichiro Sakuma, The University of Tokyo Seiji Aoyagi, Kansai University Masayoshi Muzutani, Tohoku University

General Sessions

Session Code	Session
GS01	Life Cycle Engineering and Assembly
GS02	Design
GS03	Forming
GS05	Electro-Physical, Chemical Processes
GS06	Laser machining
GS07	Additive Manufacturing
GS08	Atomic and close-to-atomic scale manufacturing
GS09	Tribology
GS10	Precision positioning
GS11	Optical metrology
GS12	Dimensional metrology
GS13	Machine tool metrology and calibration
GS14	Cyber-physical and digital twin production systems
GS15	Artificial intelligence and machine learning in precision engineering
GS17	Semicondutor manufacturing and metrology

Conference Topics

The topics of ICPE2024 cover a wide spectrum of precision engineering, including but not limited to

Digital design and manufacturing systems
Life cycle and smart engineering
Advanced system design and applications
CAD/CAM technologies
Advanced cutting technologies
Advanced grinding technologies
Tribology
Micro/Nano machining and figurings
Nano-scale surface finishing
Non-traditional machining and additive manufacturing
Energy beam processing
Advanced die/molding and polymer processing
Forming
Advanced machine tools and elements
Micro systems and machine elements
Robotics and mechatronics
Ultra precision controls
Nano-scale measurements and calibrations
Surface metrologies of nano-scale structures
Mechano photonics engineering and optical applications
Advanced image processing and applications
Advanced 3 dimensional digital processing
Advanced surface processing
Micro fabrications for functional surfaces
3D/4D printing of functional products with embedded sensors and actuators
MEMS/NEMS
Bio-medical engineering and applications
Bio-inspired design methods
Optical metrology for precision engineering
Dimensional measurement and instrumentation
Atomic and close-to-atomic scale manufacturing
Machine tool calibration
Precision positioning
Big data analytics in zero-defect machining scheduling
Artificial intelligence and machine learning in precision engineering
Cyber-physical production systems
Human-robot collaboration and brain robotics in precision assembly
Adaptive process planning and quality control in precision engineering
Semiconductor manufacturing and metrology