ICFRM-22, Shizuoka

22th International Conference on Fusion Reactor Materials (ICFRM-22)

Shizuoka, Japan. Sep. 28 to Oct. 3, 2025

Invited Oral

02E2: Sosuke Kondo, “High-Dose Irradiation Response of SiC Fibers”

Contributed Oral

29A3: Hao Yu, “Development of low-energy mechanical alloying technology to enable mass production of ODS-Cu alloys for fusion divertors”

03A5: Sumin Lee, “Local deformation behavior in proton-irradiated reduced-activation ferritic/martensitic steels under nanoindentation”

Poster

P1-015: Diancheng Geng, “Corrosion resistance of High-Mn Oxide-Dispersion Strengthened (ODS) Alumina-Forming Austenitic (AFA) Steels in Liquid Metal Sn”

P1-019: Kazuki Ogawa, “Impact of Mesoscale Heterogeneous Microstructure on Tensile Properties and Deformation Behavior of ODS Ferritic Alloys”

P1-030: Zimo GAO, “Development of Novel WO3-doped ODS-Cu Alloys Towards Industrial-Scale Production”

P1-041: Toshiki Saito, “Neutron irradiation effect on the material properties and the evaluation of bonding strength with W of Cu alloys”

P1-048: Minha Park, “Effects of neutron irradiation on hardness and electrical resistivity of tungsten and tungsten alloys after neutron irradiation in BR2”

P1-089: Kota Okada, “Evaluation of the integrity of CVD-SiC coatings after exposure to high temperature and high pressure water”

P2-065: Kaiji Yamamura, “Optimization of Sintering Conditions for Tungsten Boride Cermets for Application as Radiation Shielding Materials”

P2-074: Daichi Miura, “Development of additive manufacturing method for high-purity SiC and its material properties”

P2-118: Kaito Mizuno, “Evaluation of grain boundary strength of tungsten materials using micro-cantilever bending test”

P2-130: Yasuyuki Ogino, “Optimization and feasibility study of radiation shielding materials for fusion reactors by radiation transport simulation”

P2-157: Kaito Kamiyama, “Effect of low-temperature irradiation on hardness and microstructural evolution in Fe-Cr binary alloys”

P3-017: Taichi Miyagishi, “Unveiling the Mechanism of Irradiation-Induced Flow in Mullite Ceramics Under Particle Irradiation”

P3-162: Ryuta Kasada, “High Mn austenite steel revisited: novel alloy design concepts and material properties”

(Collaborators’ papers)

03C5: Yasutaka Soma, “”

03E4: Tatsuya Hinoki, “”

P1-002: Kotaro Seki, “”

P1-027: Shingo Okumura, “”

P1-051: Koichi Sato, “”

P2-009: Deasik Kim, “”

P2-059: Takumi Sato, “”

P2-156: Qianfei Feng, “”

P3-128: JongHyeon Park, “”

P3-157: Yoshitaka Matsukawa, “”

コメントを残す

メールアドレスが公開されることはありません。 が付いている欄は必須項目です

このサイトはスパムを低減するために Akismet を使っています。コメントデータの処理方法の詳細はこちらをご覧ください