研究業績(論文、総説、Proceedings等)

 

※2018年以降。笠田研所属者の名前は太字、笠田研所属学生の名前は青字となっています。


2022年

  • H. Wang, H. Yu, J. Liu, S. Kondo, N. Okubo, R. Kasada, “Characterization and corrosion behavior of Al-added high Mn ODS austenitic steels in oxygen-saturated lead–bismuth eutectic”, Corrosion Science 209 (2022) 110818.
  • K. Mukai, R. Kasada, J.H. Kim, M. Nakamichi, “Electronic descriptors for vacancy formation and hydrogen solution in Be-rich intermetallics”, Acta Materialia 241 (2022) 118428. 
  • Diancheng Geng, Hao Yu, Sosuke Kondo, Ryuta Kasada, “Toward the correlation of indentation hardness in micro- and nano-scale: understanding of indentation edge behaviors in Fe–Cr alloys”, Journal of Materials Science 57 (2022) 13736-13755.
  • Xinwei Yuan, Sosuke Kondo, Kazuya Shimoda, Hao Yu, Yasuki Okuno, Ryuta Kasada, “Compressive strength degradation of SiC fibers exposed to high temperatures due to impurity-induced internal oxidation”,  Journal of the European Ceramic Society 42 (2022) 5334 – 5342.
  • Yasuki Okuno, Taisuke Matsui, Tomohiro Kobayashi, Mitsuru Imaizumi, Yuki Jimba, Yu Hao, Sosuke Kondo, Yukihiro Kaneko, and Ryuta Kasada, “Hybrid Organic–Inorganic Perovskite Semiconductor-Based High-Flux Neutron Detector with BN Converter”, ACS Applied Electronic Materials 4 (2022) 3411–3420.
  • Takeshi Miyazawa, Haruka Saito, Yoshimitsu Hishinuma, Takuya Nagasaka, Takeo Muroga, Jingjie Shen, Yasuki Okuno, Hao Yu, Ryuta Kasada, Akira Hasegawa, “Effect on impact properties of adding tantalum to V-4Cr-4Ti ternary vanadium alloy”, Nuclear Materials and Energy 31 (2022) 101198.
  • [Review] 向井 啓祐, 大村涼, 八木重郎, 笠田 竜太, “軟X線発光分光法によるリチウム化合物と液体リチウム用窒素吸着材の化学状態の変化”, 日本電子news 54(1) 10-14, 2022年5月.
  • Yuyang Zheng, Diancheng Geng, Hao Yu, Sosuke Kondo, Akihiko Kimura, Hideki Yuya & Ryuta Kasada, “Evaluating the irradiation hardening of reactor pressure vessel steels by nanoindentation hardness test and micropillar compression test”,  Journal of Nuclear Science and Technology (2022).
  • Diancheng Geng, Hao Yu, Yasuki Okuno, Sosuke Kondo & Ryuta Kasada, “Practical method to determine the effective zero‑point of indentation depth for continuous stiffness measurement nanoindentation test with Berkovich tip”, Scientific Reports (2022) 12:6391.

  • Suguru Nakano, Jae-Hwan Kim, Taehyun Hwang, Ryuta Kasada, Masaru Nakamichi, “Dissolution and recovery of beryllium from beryl using a novel wet process with microwave heating”, Nuclear Materials and Energy 30 (2022) 101113.
  • Zimo Gao, Hao Yu, Diancheng Geng, Yuchen Liu, Sosuke Kondo, Yasuki Okuno, Ryuta Kasada, “Effects of zirconium addition on the material properties and microstructure of ODS-Cu alloys”, Journal of Alloys and Compounds 899 (2022) 163328.
  • Koichi Sato, Ryuta Kasada, Atsushi Kiyohara, Masashi Hirabaru, Kenichi Nakano, Kiyohiro Yabuuchi, Masahiko Hatakeyama, Qiu Xu, “Change in nanoindentation hardness of polycrystalline tungsten irradiated with Fe ions or electrons by hydrogen gas charging”, Journal of Nuclear Materials 560 (2022) 153483.

2021年


2020年

  • Yasuki Okuno, Norito Ishikawa, Masafumi Akiyoshi, Hirokazu Ando, Masaki Harumoto and Mitsuru Imaizumi, “Degradation prediction using displacement damage dose method for AlInGaP solar cells by changing displacement threshold energy under irradiation with low-energy electrons”, Japanese Journal of Applied Physics 59 (2020) 074001.
  • [Review] 檜木 達也,長谷川 晃,宮澤 健,秋吉 優史,近藤 創介, 「プロジェクトレビュー 日米科学技術協力事業 PHENIX 計画‐6年間の成果と次期計画‐ 3.タスク2 中性子照射タングステンの熱・強度特性」,J. Plasma Fusion Res. Vol.96, No.3 (2020)136‐139.
  • [Report] 近藤 正聡,坂本 宜照,森 芳孝,笠田 竜太, 「コロナ禍で核融合炉を学ぶ学生は何を思うのか(コロナウイルス感染症に負けるな!核融合若手インフォーマルミーティング主催,緊急特別企画リモートセミナーの開催報告)」、J. Plasma Fusion Res. 96 (2020) 519‐521.
  • Hao Yu, Sosuke Kondo, Ryuta Kasada, Naoko Oono, Shigenari Hayashi, Shigeharu Ukai, “Development of nano-oxide particles dispersed alumina scale formed on Zr-added FeCrAl ODS ferritic alloys”, Nuclear Materials and Energy 25 (2020) 100798.
  • Kondo S., Seki K., Maeda Y., Yu H., Fukami K., Kasada R., ‘Contribution of dangling-bonds to polycrystalline SiC corrosion’, Scripta Materialia, 188 (2020) 6-9.
  • Miyamae K., Yamada H., Kasada R., Konishi S., Sakamoto R., ‘Fuel flow and stock during deuterium-deuterium start-up of fusion reactor with advanced plasma model’, Fusion Engineering and Design, 160 (2020) 111794.
  • Wang H., Yu H., Kondo S., Okubo N., Kasada R., ‘Corrosion behaviour of Al-added high Mn austenitic steels in molten lead bismuth eutectic with saturated and low oxygen concentrations at 450 ℃’, Corrosion Science, 175 (2020) 108864.
  • Jiang S., Shen J., Nagasaka T., Muroga T., Sagara A., Ohnuki S., Hokamoto K., Tanaka S., Inao D., Morizono Y., Kasada R., Zheng P., ‘Interfacial characterization of dissimilar-metals bonding between vanadium alloy and Hastelloy X alloy by explosive welding’, Journal of Nuclear Materials, 539 (2020) 152322.
  • Ma B., Hishinuma Y., Shimada Y., Noto H., Kasada R., Oono N., Ukai S., Muroga T., ‘The size dependence of microstructure and hardness on the MA powders for the MA-HIP processed Cu-Y2O3 dispersion-strengthened alloys’, Nuclear Materials and Energy, 24 (2020) 100773.
  • Ikenoue T., Yoshida T., Miyake M., Kasada R., Hirato T., ‘Fabrication and mechanical properties of tungsten carbide thin films via mist chemical vapor deposition’, Journal of Alloys and Compounds, 829 (2020) 154567.
  • Mukai K., Kasada R., Sasaki K., Konishi S., ‘Occupied Electronic States of Li in Li, Li2O2, and Li2O Analyzed by Soft X-ray Emission Spectroscopy’, Journal of Physical Chemistry C, 124 (2020) 9256-9260.
  • Aghamiri S.M.S., Zhang S.H., Ukai S., Oono N., Kasada R., Noto H., Hishinuma Y., Muroga T., ‘Microstructure development in cryogenically rolled oxide dispersion strengthened copper’, Materialia, 9 (2020) 100520.
  • Liu Y., Kondo S., Yu H., Yabuuchi K., Kasada R., ‘Statistical approach for understanding the effect of specimen size on the yield stress and its scattering in mechanically-alloyed Cu and ODS-Cu obtained by micro-pillar compression test’, Materials Transactions, 61 (2020) 955-962.
  • [Review] R. Kasada, K. Mukai, “Chemical State Analysis of Light Elements in Nuclear Fission and Fusion Reactor Materials by Soft X-ray Emission Spectroscopy in Electron Probe Microanalyzer”, JEOL News 55(1) 32 – 35 2020年7月
  • [Review] 笠田 竜太, 向井 啓祐, “軟X線発光分光装置を搭載した電子プローブマイクロアナライザによる原子力・核融合材料中の軽元素分析および状態分析”, 日本電子news 52(1) 19 – 22 2020年5月
  • [Report] 笠田 竜太, “材料の硬さの科学技術コミュニケーション”, 材料試験技術 65(1) 62 – 64 2020年1月
  • [Report] 小川 雄一, 笠田 竜太, 吉澤 菜穂美, 東島 智, 矢治 健太郎, “サロン:アウトリーチヘッドクォーターの設置にあたって”, プラズマ・核融合学会誌 96(5) 269 – 272 2020年5月
  • F. Sun, M. Nakata, S. E. Lee, M. Zhao, T. Wada, S. Yamazaki, A. Koike, S. Kondo, T. Hinoki, M. Hara, Y. Oya, “Synergistic effects of high energy helium irradiation and damage introduction at high temperature on hydrogen isotope retention in plasma facing materials”, Journal of Nuclear Materials 533 2020年5月
  • Yuki Maeda, Alvaro Munoz-Noval, Emiri Suzuki, Sosuke Kondo, Atsushi Kitada, Shigetomo Shiki, Masataka Ohkubo, Shinjiro Hayakawa, Kuniaki Murase, Kazuhiro Fukami, “Macroporous SiC Formation in Anodizing Triggered by Irradiation-Induced Lattice Defects”, JOURNAL OF PHYSICAL CHEMISTRY C 124(20) 11032 – 11039 2020年5月

2019年

  • Kasada R., Sato K., ‘Positron annihilation study on the phase transition of thermally aged Fe-Cr binary alloys at 748K’, Philosophical Magazine Letters, 99 (2019) 360-371.
  • Aghamiri S.M.S., Ukai S., Oono N., Kasada R., Noto H., Hishinuma Y., Muroga T., ‘Recrystallization of cold rolled oxide dispersion strengthened copper during room temperature annealing’, Journal of Alloys and Compounds, 798 (2019) 187-193.
  • Lee H.T., Ando S., Coenen J.W., Mao Y., Kasada R., Riesch J., Ueda Y., ‘Micro- and macro- elastic properties of tungsten fiber-reinforced tungsten composites probed by nano-indentation and laser ultrasonics’, Nuclear Materials and Energy, 19 (2019) 262-266.
  • Aghamiri S.M.S., Oono N., Ukai S., Kasada R., Noto H., Hishinuma Y., Muroga T., ‘Microstructure development and high tensile properties of He/H2 milled oxide dispersion strengthened copper’, Journal of Alloys and Compounds, 783 (2019) 674-679.
  • Mukai K., Kasada R., Yabuuchi K., Konishi S., Kim J.-H., Nakamichi M., ‘Valence Electron and Chemical State Analysis of Be12M (M = Ti, V) Beryllides by Soft X-ray Emission Spectroscopy’, ACS Applied Energy Materials, 2 (2019) 2889-2895.
  • Aghamiri S.M.S., Oono N., Ukai S., Kasada R., Noto H., Hishinuma Y., Muroga T., ‘Brass-texture induced grain structure evolution in room temperature rolled ODS copper’, Materials Science and Engineering A, 749 (2019) 118-128.
  • [Review] 大野 直子, Aghamiri S.M.S, 鵜飼 重治, 笠田 竜太, 能登 裕之, 菱沼 良光, 室賀 健夫, “ダイバータ用ODS-Cuの開発 (小特集 原型炉級核融合ダイバータおよび先進加速器コンポーネント開発に向けた共通課題と最新研究)”,  プラズマ・核融合学会誌 = Journal of plasma and fusion research 95(8) 370 – 373 2019年8月
  • Kazuki Nakamura, Hikari Fujita, Jan Engels, Masayuki Tokitani, Yoshimitsu Hishinuma, Kiyohiro Yabuuchi, Sosuke Kondo, Sho Kano, Takayuki Terai, Takumi Chikada, “Iron-ion irradiation effects on microstructure of yttrium oxide coating fabricated by magnetron sputtering”, FUSION ENGINEERING AND DESIGN 146 2031 – 2035 2019年9
  • Azusa Konno, Naoko H. Oono, Shigeharu Ukai, Sosuke Kondo, Okinobu Hashitomi, Akihiko Kimura, “Stability of gamma ‘ Precipitates in Nickel Based Oxide Dispersion-Strengthened Superalloys under High-Temperature and Heavy Irradiation Conditions”, MATERIALS TRANSACTIONS 60(11) 2260 – 2266 2019年

2018年

  • Aghamiri, S.M.S., Oono, N., Ukai, S., Kasada, R., Noto, H., Hishinuma, Y., Muroga, T., “Microstructure and mechanical properties of mechanically alloyed ODS copper alloy for fusion material application”, Nuclear Materials and Energy 15 (2018) 17-22.
  • Nam H., Kasada R., Konishi S., ‘Economic Analysis Between Diesel and SOFC Electricity via Fusion-Biomass Hybrid Model’, Journal of Fusion Energy, 37 (2018) 333-345.
  • Sato K., Yamashita H., Hirosako A., Komazaki S., Xu Q., Onoue M., Kasada R., Yabuuchi K., Kimura A., ‘Investigation of mechanical properties of stress-relieved and electron-irradiated tungsten after hydrogen charging’, Nuclear Materials and Energy, 17 (2018) 29-33.
  • Nozawa T., Ozawa K., Park C., Park J.-S., Kohyama A., Hasegawa A., Nogami S., Hinoki T., Kondo S., Yano T., Shibayama T., Tsuchiya B., Shikama T., Nagata S., Tanaka T., Iwakiri H., Yamamoto Y., Konishi S., Kasada R., Kondo M., Kunugi T., Yokomine T., Ueki Y., Okubo N., Taguchi T., Tanigawa H., ‘Japanese activities of the R&D on silicon carbide composites in the broader approach period and beyond’, Journal of Nuclear Materials, 511 (2018) 582-590.
  • Park C., Nozawa T., Kasada R., Tosti S., Konishi S., Tanigawa H., ‘The effect of wall flow velocity on compatibility of high-purity SiC materials with liquid Pb-Li alloy by rotating disc testing for 3000 h up to 900 °C’, Fusion Engineering and Design, 136 (2018) 623-627.
  • Akiyoshi M., Kasada R., Ishibashi Y., Garrison L.M., Geringer J.W., Porter W.D., Katoh Y., ‘Validation of miniature test specimens for post-irradiation thermal diffusivity measurement’, Fusion Engineering and Design, 136 (2018) 513-517.
  • Okano K., Kasada R., Ikebe Y., Ishii Y., Oba K., Kashiwagi M., Sakamoto R., Sawa N., Takenaga H., Nishimura A., Fukuie M., Fujioka S., Ueda Y., Akiyama T., ‘An action plan of Japan toward development of demo reactor’, Fusion Engineering and Design, 136 (2018) 183-189.
  • Okino F., Kasada R., Konishi S., ‘Liquid PbLi atomization in vacuum for tritium and heat recovery’, Fusion Engineering and Design, 136 (2018) 63-66.
  • Huang B., Hishinuma Y., Noto H., Kasada R., Oono N., Ukai S., Muroga T., ‘In-situ fabrication of yttria dispersed copper alloys through MA-HIP process’, Nuclear Materials and Energy, 16 (2018) 168-174.
  • Noshita Y., Sato K., Yamashita H., Kasada R., Xu Q., Hatakeyama M., Sunada S., ‘Detection of phase separation of neutron-irradiated Fe–Cr binary alloys using positron annihilation spectroscopy’, Nuclear Materials and Energy, 15 (2018) 175-179.
  • Higashino S., Miyake M., Fujii H., Takahashi A., Kasada R., Hirato T., ‘Electrodeposition of aluminumtungsten alloy films using EMICAlCl3W6Cl12 ionic liquids of different compositions’, Materials Transactions, 59 (2018) 944-949.
  • Takumi Chikada, Hikari Fujita, Jan Engels, Anne Houben, Jumpei Mochizuki, Seira Horikoshi, Moeki Matsunaga, Masayuki Tokitani, Yoshimitsu Hishinuma, Sosuke Kondo, Kiyohiro Yabuuchi, Thomas Schwarz-Selinger, Takayuki Terai, Yasuhisa Oya, “Deuterium permeation behavior and its iron-ion irradiation effect in yttrium oxide coating deposited by magnetron sputtering”, JOURNAL OF NUCLEAR MATERIALS 511 560 – 566 2018年12月
  • T. Koyanagi, Y. Katoh, T. Nozawa, L. L. Snead, S. Kondo, C. H. Henager, M. Ferraris, T. Hinoki, Q. Huang, “Recent progress in the development of SiC composites for nuclear fusion applications”, Journal of Nuclear Materials 511 544 – 555 2018年12月1日
  • Yasuhisa Oya, Shodai Sakurada, Keisuke Azuma, Qilai Zhou, Akihiro Togari, Sosuke Kondo, Tatsuya Hinoki, Naoaki Yoshida, Dean Buchenauer, Robert Kolasinski, Masashi Shimada, Chase N. Taylor, Takumi Chikada, Yuji Hatano, “Surface or bulk He existence effect on deuterium retention in Fe ion damaged W”, Nuclear Materials and Energy 16 217 – 220 2018年8月
  • Yuki Maeda, Kazuhiro Fukami, Sosuke Kondo, Atsushi Kitada, Kuniaki Murase, Tatsuya Hinoki, “Irradiation-induced point defects enhance the electrochemical activity of 3C-SiC: An origin of SiC corrosion”, ELECTROCHEMISTRY COMMUNICATIONS 91 15 – 18 2018年6月
  • Valentina Casalegno, Sosuke Kondo, Tatsuya Hinoki, Milena Salvo, Aleksandra Czyrska-Filemonowicz, Tomasz Moskalewicz, Yutai Katoh, Monica Ferraris, “CaO-Al2O3 glass-ceramic as a joining material for SiC based components: A microstructural study of the effect of Si-ion irradiation”, JOURNAL OF NUCLEAR MATERIALS 501 172 – 180 2018年4月
  • Q. Huang, T. Hinoki, M. Ferraris, C.H. Henager, S. Kondo, L.L. Snead, T. Nozawa, Y. Katoh, T. Koyanagi, “Recent progress in the development of SiC composites for nuclear fusion applications”, Journal of Nuclear Materials 2018年