Numat2024 (笠田、近藤、余、Geng、齋藤、板垣、宮岸、水口、山村、上山)

Invited Oral

1B.I.20

Investigation of local mechanical properties and microstructure of under-clad hardened layer of RPV steel

Ryuta Kasada¹, Takashi Noro^1,2, Minako Endo³, Yuki Jimba¹, Kaito Kamiyama^1,2, Diancheng Geng¹, Hao Yu¹, Yasuyuki Ogino¹, Sosuke Kondo¹, Hideki Yuya³

Contributed Oral

2A.C.28

Impact of CVD process temperature on the strength of SiC coatings

Sosuke Kondo¹, Hirokazu Katsui², Kazuya Shimoda³, Taichi Miyagishi¹, Hao Yu¹, Yasuyuki Ogino¹, Ryuta Kasada¹

2A.C.22

Effect of irradiation on the adhesion strength of alumina scales formed on FeCrAl ODS alloy

Hao Yu¹, Ryuta Kasada¹, Sosuke Kondo¹, Yasuyuki Ogino¹, Koji Inoue¹, Naoko Oono-Hori², Shigeharu Ukai³

1A.C.22

Dissolution temperature of Ni-Si-Mn precipitates in steels: when they became compounds

Yoshitaka Matsukawa¹, Hideto Fujieda¹, Sadahiro Tsurekawa¹, Hiroaki Muta², Fumihiro Nakamori², Masatake Yamaguchi³, Ryuta Kasada⁴, Kenta Yoshida⁴, Mitsutaka Sato⁴, Kiyohiro Yabuuchi⁵, Minako Endou⁶, Hideki Yuya⁶

Poster

P1.025
Material properties of Al-added high-Mn austenite steels for fusion reactor blanket
Kota Mizuguchi1, Junichi Miyazawa2, Geng Diancheng1, Yasuyuki Ogino1, Yu Hao1, Sosuke Kondo1, Ryuta Kasada1

P2.045

The development of Cu-YSZ alloy for the divertor heat sink of the fusion reactor

Toshiki Saito¹, Hao Yu¹, Zimo Gao¹, Gibum Kim², JongHyeon Park², Seongbeen Lee², Takuji Oda², Takashi Nozawa³, Dai Hamaguchi³, Ryuta Kasada¹

P2.043

Irradiation Effects on Double-Layer Coating on Silicon Carbide

Taichi Miyagishi¹, Sosuke Kondo¹, Hirokazu Katsui², Kiyohiro Yabuuchi³, Yasuyuki Ogino¹, Hao Yu¹, Ryuta Kasada¹

FT1.03

Effect of low-temperature neutron irradiation on hardness and microstructural evolution in Fe-Cr binary alloys

Kaito Kamiyama^1,2, Takeshi Toyama², Koji Inoue², Yasuyoshi Nagai², Koichi Sato³, Diancheng Geng², Yasuyuki Ogino², Hao Yu², Sosuke Kondo², Ryuta Kasada²

FT1.14

Mechanical Properties of Novel Reduced Activation High-Mn Oxide-Dispersion Strengthened Alumina-Forming Austenitic Steels at Room and Elevated Temperature

Diancheng Geng¹, Hao Yu¹, Yasuyuki Ogino¹, Sosuke Kondo¹, Akira Hasegawa¹, Junichi Miyazawa², Ryuta Kasada¹

P1.006

Evaluation of mechanical properties of Fe₂M Laves Phase using nanoindentation

Katsumi Itagaki^1,2, Diancheng Geng^1,2, Yuki Jimba², Yasuyuki Ogino², Hao Yu², Sosuke Kondo², Ryuta Kasada²

P1.014

Mechanical and Thermal Properties of Tungsten Boride Cermet for Radiation Shielding Component

Kaiji Yamamura¹, Yasuyuki Ogino², Yuki Jimba², Hao Yu², Sosuke Kondo², Ryuta Kasada²

P2.050

Investigation of failure behavior of protective alumina film of FeCrAl-ODS under stress environment

Joh Hasegawa¹, Naoko Oono-Hori¹, Xiangyu Wu², Hao Yu², Ryuta Kasada²