Matsubae Laboratory

Research Paper

2021

Imam Eko Setiawan, Zhengyang Zhang, Glen Corder, Kazuyo Matsubae, “Evaluation of Environmental and Economic Benefits of Land Reclamation in the Indonesian Coal Mining Industry "Resources,Vol.10(6)(2021.6.7)
https://doi.org/10.3390/resources10060060
Aurup Ratan D, Azusa Oita, Kazuyo Matsubae, “The Effect of Religious Dietary Cultures on Food Nitrogen and Phosphorus Footprints: A Case Study of India " Nutrients 2021,Vol.13(6),1926(2021.6.3)
https://doi.org/10.3390/nu13061926
Numfor Solange A, Omosa Geoffrey B, Zhengyang Zhang, Kazuyo Matsubae, “A Review of Challenges and Opportunities for End-of-Life Vehicle Recycling in Developing Countries and Emerging Economies: A SWOT Analysis " Sustainability,Vol.13(9)(2021.4.27)
https://doi.org/10.3390/su13094918
Zhengyang Zhang, Kazuyo Matsubae, Kenichi Nakajima“Impact of remanufacturing on the reduction of metal losses through the life cycles of vehicle engines ”Resources, Conservation and Recycling, Vol.170,105614,(2021.4.15)
https://doi.org/10.1016/j.resconrec.2021.105614

2020

Shoki Kosai, Kenyu Matusi, Kazuyo Matsubae, Eiji Yamasue, Tetsuya Nagasaka,“Natural resource use of gasoline, hybrid, electric and fuel cell vehicles considering land disturbances” Resources, Conservation and Recycling,Vol.166,pp.105256 (2020.11.4)
https://doi.org/10.1016/j.resconrec.2020.105256
Robi Kurniawan, Gregory P. Trencher, Achmed S. Edianto, Imam E. Setiawan, Kazuyo Matsubae,“Understanding the multi-faceted derivers of increasing coal consumption in Indonesia”Energies Vol.13(14),pp.3660, (2020.7.16)
https://doi.org/10.3390/en13143660

2019

Pakoksung Kwanchai, Suppasri Anawat, Matsubae Kazuyo, Imamura Fumihiko, “Estimating Tsunami Economic Losses of Okinawa Island with Multi-Regional Input-Output Modeling.” GEOSCIENCES,Vol.9(8),pp.394(2019.8.9)
https://doi.org/10.3390/geosciences9080349

2018

Kenichi Nakajima, Shoichiro Noda, Keisuke Nansai, Kazuyo Matsubae, Wataru Takayanagi, Makoto Tomita, “Global Distribution of Used and Unused Extracted Materials Induced by Consumption of Iron, Copper, and Nickel” ENVIRONMENTAL SCIENCE & TECHNOLOGY,Vol.53(3),pp.1555-1563(2018.12.31)
https://doi.org/10.1021/acs.est.8b04575
片桐究、溝口修史、松八重一代、長坂徹也, “日本における産業を中心とした窒素フローの2005年から2015年にかけての変化” 日本LCA学会誌,Vol.14(4),pp.319-331(2018.10)
 https://doi.org/10.3370/lca.14.319
Clifford Martin J., Ali Saleem H., Matsubae Kazuyo, “Mining land restoration and sustainable development in isolated islands: An industrial ecology perspective on extractive transitions on Nauru.” AMBIO,Vol.48(4),pp.397-408(2019.8.3)
https://doi.org/10.1007/s13280-018-1075-2
Nakajima Kenichi, Daigo Ichiro, Nansai Keisuke, Matsubae Kazuyo, Takayanagi Wataru, Tomita Makoto, Matsuno Yasunari, “Global distribution of material stocks: iron, copper and nickel.” MATERIAUX & TECHNIQUES,Vol.105(5-6),pp.7,(2018.6.20)
https://doi.org/10.1051/mattech/2017040
Yamasue E, Matsubae Kazuyo, “ Phosphorus in steelmaking processes.” Phosphorus Recovery and Recycling,pp.349-364 (2018.5.26)
https://doi.org/10.1007/978-981-10-8031-9_24
Matsubae Kazuyo, Webeck E. “Phosphorus flows in Asia.” Phosphorus Recovery and Recycling,pp.29-44(2018.5.26)
https://doi.org/10.1007/978-981-10-8031-9_2
Nattorp A, Kabbe C, Matsubae K, Ohtake H. “Development of phosphorus recycling in Europe and Japan.” Phosphorus Recovery and Recycling,pp.3-27 (2018.5.26)
https://doi.org/10.1007/978-981-10-8031-9_1
山末英嗣, 光斎翔貴, MCLELLAN Benjamin, 松八重一代, “食料生産における関与物質総量の枠組の提案と評価~国産食材のTMR係数~.” 日本LCA学会誌,Vol.14(2),pp.146-157(2018.4.26)
https://doi.org/10.3370/lca.14.146

2017

Hajime Ohno, Kazuyo Matsubae, Kenichi, Nakajima, Yasushi Kondo, Shinichiro Nakamura, Yasuhiro Fukushima, Tetsuya Nagasaka, “Optimal Recycling of Steel Scrap and Alloying Elements: Input-Output based Linear Programming Method with Its Application to End-of-Life Vehicles in Japan.” ENVIRONMENTAL SCIENCE & TECHNOLOGY,Vol.51(22),pp.13086-13094 (2017.11.7)
https://doi.org/10.1021/acs.est.7b04477
Nakajima Kenichi, Daigo Ichiro, Nansai Keisuke, Matsubae Kazuyo, Takayanagi Wataru, Tomita Makoto, Matsuno Yasunari, “Global distribution of material consumption: Nickel, copper, and iron.” RESOURCES CONSERVATION AND RECYCLING,Vol.133,pp.369-374(2017.9.18)
https://doi.org/10.1016/j.resconrec.2017.08.029
Kentaro Takeyama, Hajime Ohno, Kazuyo Matsubae, Kenichi Nakajima, Yasushi Kondo and Tetsuya Nagasaka. “Dynamic material flow analysis of nickel and chromium associated with steel materials by using matrace.” Matériaux & Techniques,Vol.104(6-7),pp.610 (2017.5.12)
https://doi.org/10.1051/mattech/2017012
Kenichi Nakajima, Ichiro Daigo, Kenichi Okada, Shimpei Koike, Keisuke Nansai, Kazuyo Matsubae, Osamu Takeda and Takahiro Miki “Bottlenecks in material cycle of nickel.” Matériaux & Techniques,Vol.104(6-7),pp.604(2017.4.21)
https://doi.org/10.1051/mattech/2017012

2016

佐々木翔、松八重一代、中島謙一、村上進亮、長坂徹也 “責任あるサプライチェーンの実現に向けたニッケル資源利用に関わるリスク要因の整理と解析” 日本LCA学会誌,Vol.13(1),pp.2-11(2017.2.7)
 https://doi.org/10.3370/lca.13.2
Kenichi Nakajima, Keisuke Nansai, Kazuyo Matsubae, Makoto Tomita, Wataru Takayanagi, Tetsuya Nagasaka “Global land-use change hidden behind nickel consumption.” Science of The Total Environment,Vol.586(15),pp.730-737(2017.2.21)
https://doi.org/10.1016/j.scitotenv.2017.02.049
Hajime Ohno, Yasuhiro Fukushima, Kazuyo Matsubae, Kenichi Nakajima, Tetsuya Nagasaka “Revealing Final Destination of Special Steel Materials with Input-Output-Based Material Flow Analysis.” ISIJ INTERNATIONAL,Vol.57(1),pp.193-199(2017.1.15)
 https://doi.org/10.2355/isijinternational.ISIJINT-2016-470
Ohno H, Matsubae K, Nakajima K, Nansai K, Fukushima Y, Nagasaka T. “Consumption-based accounting of steel alloying elements and greenhouse gas emissions associated with the metal use: the case of Japan.” Journal of Economic Structures,Vol.5(1) (2016.12.21)
https://doi.org/10.1186/s40008-016-0060-9
Hideaki Shibata, James N. Galloway, Allison M. Leach, Lia R. Cattaneo, Laura Cattell Noll, Jan Willem Erisman, Baojing Gu, Xia Liang, Kentaro Hayashi, Lin Ma, Tommy Dalgaard, Morten Graversgaard, Deli Chen, Keisuke Nansai, Junko Shindo, Kazuyo Matsubae, Azusa Oita, Ming-Chien Su, Shin-Ichiro Mishima, Albert Bleeker, “Nitrogen footprints: Regional realities and options to reduce nitrogen loss to the environment” AMBIO,Vol.46(2)pp.129-142(2016.9.6)
https://doi.org/10.1007/s13280-016-0815-4
Nakajima K, Takeda O, Miki T, Matsubae K, Nagasaka T. “Recycling and Dissipation of Metals: Distribution of Elements in the Metal, Slag, and Gas Phases During Metallurgical Processing.” Metal Sustainability: Global Challenges, Consequences, and Prospects,pp.453-466 (2016.8.19)
https://doi.org/10.1002/9781119009115.ch19
Eiji YAMASUE, Kazuyo Matsubae, Kenichi Nakajima, Ichiro Daigo and and Keiichi N Ishihara, “Total Material Requirement of Scrap Steel from End-of-Life Vehicles.” ISIJ International,Vol.56(8),pp.1487-1496(2016.8.15)
https://doi.org/10.2355/isijinternational.ISIJINT-2015-312
Artem Golev, Tim Werner, Xuan Zhu, Kazuyo Matsubae, “Product flow analysis using trade statistics and consumer survey data: a case study of mobile phones in Australia.” Journal of Cleaner Production,Vol.133,pp.262-271 (2016.10)
https://doi.org/10.1016/j.jclepro.2016.05.117
Xin Lu, Kazuyo Matsubae, Kenichi Nakajima, Shinichiro Nakamura, Tetsuya Nagasaka, “Thermodynamic Considerations of Contamination by Alloying Elements of Remelted End-of-Life Nickel- and Cobalt-Based Superalloys.” Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science,Vol.47(3),pp.1785-1795(2016.4.5)
https://doi.org/10.1007/s11663-016-0665-2

2015

Ohno Hajime, Matsubae Kazuyo, Nakajima Kenichi, Kondo Yasushi, Nakamura Shinichiro, Nagasaka Tetsuya “Toward the efficient recycling of alloying elements from end of life vehicle steel scrap.” RESOURCES CONSERVATION AND RECYCLING, vol 100, 11-20 (2015.7)
K. Matsubae*, E. Webeck, K. Nansai, K. Nakajima, M. Tanaka, T. Nagasaka “Hidden phosphorus flows related with non-agriculture industrial activities: A focus on steelmaking and metal surface treatment.” Resources, Conservation & Recycling,105, (2015.12),360-367
Eiji YAMASUE*, Kazuyo MATSUBAE and Keiichi N. ISHIHARA “Weight of Land Use for Phosphorus Fertilizer Production in Japan in Terms of Total Material Requirement.” Global Environmental Research,19(1) (2015),97-104
Elizabeth WEBECK*, Kazuyo MATSUBAE, Kenichi Nakajima, Keisuke Nansai, Tetsuya NAGASAKA “Phosphorus Flows in the Asian Region.” Global Environmental Research,19(1) (2015),9-18
Matsubae K, Nagasaka T. “Resource logistics analysis on phosphorus and its applications for science, technology and innovation (STI) policy.” Topical Themes in Energy and Resources: A Cross-Disciplinary Education and Training Program for Environmental Leaders, (2015),159-176

2014

山末英嗣,松八重一代,中島謙一,醍醐市朗,石原慶一, “使用済み自動車から得られる鉄スクラップの関与物質総量.” 鉄と鋼,100(6) (2014.6)
松八重 一代、飯塚陽祐、長村弘樹、大野 肇、中島 謙一長坂 徹也 “廃自動車由来の鉄鋼スクラップソーティングのコストベネフィット解析.” 鉄と鋼,100(6) (2014.6)
松八重 一代、飯塚 陽祐、大野 肇、平木岳人、三木貴博,中島謙一、長坂 徹也 “自動車由来鉄鋼スクラップ再資源化における鉄鋼合金元素分配傾向.” 鉄と鋼,100(6) (2014.6)
中島謙一、南斉 規介、松八重 一代、長坂 徹也 “グローバルサプライチェーンを通じた鉄の国際移動量.” 鉄と鋼,100(6) (2014.6)
Elizabeth WEBECK, Kazuyo MATSUBAE, Kenichi NAKAJIMA, Keisuke NANSAI, Tetsuya NAGASAKA “Analysis of Phosphorus Dependency in Asia.” SOCIOTECHNICA,11,(2014.4), 119-126
H.Ohno, K.Matsubae, K. Nakajima, S.Nakamura, and T.Nagasaka “Unintentional Flow of Alloying Elemnts in Steel during Recycling of End-of-Life Vehicles” Journal of Industrial Ecology,18(2) (2014.4),242-253
Shigemei Kagawa, Shinichiro Nakamura, Yasushi Kondo, Kazuyo Matsubae, and Tetsuya Nagasaka, “Forecasting Replacement Demand of Durable Goods and the Induced Secondary Material Flows: A Case Study of Automobiles.” Journal of Industrial Ecology,15,(2014)10-19
Elizabeth WEBECK, Kazuyo MATSUBAE,Tetsuya NAGASAKA, “Phosphorus requirements for the changing diets of China, India and Japan.” Environmental Economics and Policy Studies 17 (3) (2014) 455 – 469
Nakamura, Shinichiro; Kondo, Yasushi; Kagawa, Shigemi; Matsubae, Kazuyo; Nakajima, Kenichi; Nagaska, Tetsuya, “MaTrace: Tracing the fate of materials over time and across products in open-loop recycling.” Environmental Science & Technology,48(13),(2014.7),7207-7214
Kenichi Nakajima, Keisuke Nansai, Kazuyo Matsubae, Tetsuya Nagasak, “Material Flow of Iron in Global Supply Chain.” ISIJ INTERNATIONAL,54(11), (2014), 2657-2662
Matsubae Kazuyo, Iizuka Yousuke, Ohno Hajime, Hiraki Takehito, Miki Takahiro, Nakajima Kenichi, Nagasaka Tetsuya, “Distribution Analysis on Steel Alloying Elements in the End of Life Vehicle Scrap Recycling Process.” TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN,100(6) (2014),788-793
Matsubae Kazuyo, Iizuka Yousuke, Osamura Hiroki, Ohno Hajime, Nakajima Kenichi, Nagasaka Tetsuya, “Cost Benefit Analysis of End of Life Vehicle Origin Scrap Sorting.” TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN,100(6),(2014),794-798
Nakajima Kenichi, Nansai Keisuke, Matsubae Kazuyo, Nagasaka Tetsuya, “Material Flow of Iron in Global Supply Chain.” TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN,100(6) (2014),750-755
Yamasue Eiji, Matsubae Kazuyo, Nakajima Kenichi, Daigo Ichiro, Ishihara Keiichi N. “Total Material Requirement of Scrap Steel from End-of-Life Vehicle.” TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN,100(6) (2014),778-787
K. Nakajima, Y. Otsuka, Y. Iwatsuki, K. Nansai, H. Yamano, K. Matsubae, S. Murakami, T. Nagasaka, “Global supply chain analysis of nickel: importance and possibility of controlling the resource logistics.” METALLURGICAL RESEARCH & TECHNOLOGY,111(6) (2014),339-346
Yarime M, Carliell-Marquet C, Hellums D.T, Kalmykova Y, Lang D.J, Bao Le Q, Malley D, Morf L.S, Matsubae K, Matsuo M, Ohtake H, Omlin A.P, Petzet S, Scholz R.W, Shiroyama H, Ulrich A.E, Watts P. “Dissipation and recycling: What losses, what dissipation impacts, and what recycling options?” Sustainable Phosphorus Management: A Global Transdisciplinary Roadmap, (2014),247-274

2013

Yamasue Eiji, Matsubae Kazuyo, Nakajima Kenichi, Hashimoto Seiji, Nagasaka Tetsuya, “Using Total Material Requirement to Evaluate the Potential for Recyclability of Phosphorous in Steelmaking Dephosphorization Slag.” JOURNAL OF INDUSTRIAL ECOLOGY, 17(5) (2013.10)722-730
Miyamoto Shigeyuki, Ikaga Toshiharu, Hara Minako, Kawakubo Shun, Matsuno Yasunari, Nakajima Kenichi, Dowaki Kiyoshi, Motoshita Masaharu, Hayashi Kiyotada, Matsubae Kazuyo, Nakajima Michiyasu, Kakisawa Hideki, Hashimoto Seiji, “The 10th International Conference on EcoBalance (EcoBalance 2012)-Challenges and Solutions for Sustainable Society, November 20- 23, 2012, Tokyo, Japan.” INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT, 18(7), (2013.8),1425-1433
Nakajima Kenichi, Ohno Hajime, Kondo Yasushi, Matsubae Kazuyo, Takeda Osamu, Miki Takahiro, Nakamura Shinichiro, Nagasaka Tetsuya, “Simultaneous Material Flow Analysis of Nickel, Chromium, and Molybdenum Used in Alloy Steel by Means of Input-Output Analysis.” ENVIRONMENTAL SCIENCE & TECHNOLOGY,47(9) (2013.5),4653-4660
中谷隼・醍醐市朗・松八重一代・中島謙一・井原智彦・田原聖隆, “グラフ理論を用いたサプライチェーン機能停止リスクの構造分析.” 開発技術,19 (2013),23-35
Cors R, Matsubae K, Street A. “How MFA, Transdisciplinarity, Complex Adaptive Systems Thinking, and Education Reform Are Keys to Better Managing P: P is for Parity.” Phosphorus, Food, and Our Future (2013)
Yoshida H, Van Dijk K.C, Drizo A, Van Ginkel S.W, Matsubae K, Buehrer M. “Phosphorus Recovery and Reuse: P is for Processing.” Phosphorus, Food, and Our Future, (2013)
Matsubae K, Nakajima K, Nansai K, Nagasaka T. “Phosphorus Flow Analysis for Food Production and Consumption.” REWAS 2013 Enabling Materials Resource Sustainability, (2013), 423-424
Nakajima K, Matsubae K ,Kondo Y, Nakamura S, Nagasaka T. “IO-MFA and Thermodynamic Approach for Metal Recycling.” REWAS 2013 Enabling Materials Resource Sustainability, (2013),412-413
Ohno H, Matsubae K, Nakajima K, Nakamura S, Nagasaka T. “Development of Efficient Recycling System for Steel Alloying Elements in End of Life Vehicles.” REWAS 2013 Enabling Materials Resource Sustainabilit (2013),414-422
Mishima S, Matsubae K, Kimura S.D, Eguchi S. “Phosphorus conventional use, reduction potential, and possibility of self-sufficiency during food and feed production in Japan.” WIT Transactions on Ecology and the Environment,170 (2013),185-194
Yamasue E, Matsubae K, Nakajima K, Nagasaka T. “Potential of Steelmaking Slag as New Phosphorous Resource in Terms of Total Materials Requirement.” REWAS 2013 Enabling Materials Resource Sustainability (2013),238-239

2012

Shinichiro Nakamura, Yasushi Kondo, Kazuyo Matsubae, Kenichi Nakajima, Tasaki Tomohiro and Tetsuya Nagasaka, “Quality- and dilution losses in the recycling of ferrous materials from end-of-life passenger cars: input-output analysis under explicit consideration of scrap quality.” Environmental Science & Technology,46(17)9266-9273(2012.8)
Hiraki Takehito, Kobayashi Junichi, Urushibata Satomi, Matsubae Kazuyo, Nagasaka Tetsuya, “Removal of Sulfur from CaF2 Containing Desulfurization Slag Exhausted from Secondary Steelmaking Process by Oxidation.” METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE,43(4),(2012.8)703-709
Lu X., Hiraki T., Nakajima K., Takeda O., Matsubae K., Zhu H.M., Nakamura S., Nagasaka T, “Thermodynamic analysis of separation of alloying elements in recycling of end-of-life titanium products.” Separation and Purification Technology,89,(2012),135-141
X. Lu, K. Nakajima, H. Sakanakura, K. Matsuabe, H. Bai, and T. Nagasaka, “Thermodynamic Estimation of Minor Element Distribution between Immiscible Liquids in Fe-Cu-Based Metal Phase Generated in Melting Treatment of Municipal Solid Wastes.” Waste Management,32(6) (2012),1148-1155
Kondo, Y, Nakajima, K., Matsubae K. and Nakamura, S, “The anatomy of capital stock: input-output material flow analysis (MFA) of the material composition of physical stocks and its evolution over time.” Revue de Metallurgie,(2012)109(5)293-298
Tsubone A, Momiyama T, Inoue M, Chairaksa R, Matsubae K, Miki T, Nagasaka T. “Dust injection technology for reducing dust treatment burden.” Iron and Steel Technology,9(7) (2012),184-193
Tsubone A, Momiyama T, Inoue M, Saito N, Matsubae K, Nagasaka T., “Development of EAF dust injection technology in aichi steel.” AISTech - Iron and Steel Technology Conference Proceedings (2012),163-172

2011

Shunsuke Kashiwakura, Hajime Ohno, Yuichi Kumagai, Hiroshi Kubo, Kazuyo Matsubae, and Tetsuya Nagasaka, “Dissolution Behavior of Selenium from Coal Fly Ash Particles for the Development of an Acid-Washing Process.” Chemosphere,85(4),(2011.10),598-602
Kenichi Nakajima, Osamu Takeda, Takahiro Miki, Kazuyo Matsubae, Tetsuya Nagasaka, “Thermodynamic Analysis for the Controllability of Elements in the Recycling Process of Metals.” ENVIRONMENTAL SCIENCE & TECHNOLOGY,45(11),(2011.6),4929-4936
Takehito Hiraki, Osamu Takeda, Kenichi Nakajima, Kazuyo Matsubae, Shinichiro Nakamura, and Tetsuya Nagasaka, “Thermodynamic Criteria for the Removal of Impurities from End-of-Life Magnesium Alloys by Evaporation and Flux Treatment.” Science and Technology of Advanced Materials12(3) (2011.6),
Shinichiro Nakamura, Yasushi Kondo, Kazuyo Matsubae, Kenichi Nakajima, Tetsuya Nagasaka, “UPIOM: A New Tool of MFA and Its Application to the Flow of Iron and Steel Associated with Car Production.” ENVIRONMENTAL SCIENCE & TECHNOLOGY, 45(3), (2011.2),1114-1120
K.Matsubae, K.Nakajima, S.Nakamura, and T.Nagasaka, “Impacts on CO2 of the recovery of secondary ferrous materials from alternative ELV treatment methods: a Waste Input Output Analysis.” ISIJ international, 51(1), (2011)
Kazuyo, Matsubae, Jun Kajiyama, Takehito Hiraki and Tetsuya Nagasaka, “Virtual Phosphorus Ore Requirement of Japanese Economy.” Chemosphere84(6), (2011.8) 767-722
H-W. Ma, K. Matsubae, K.Nakajima, M-S.Tsai, K-H.Shao, P-C.Chen, C-H.Lee and T. Nagasaka, “Substance Flow Analysis of Zinc Cycle and Current Status of Electric Arc Furnace Dust Management for Zinc Recovery in Taiwan.” RESOURCES CONSERVATION AND RECYCLING 56 (1) 134 – 140(2011,11)”
Kenichi Nakajima, Keisuke Nansai, Kazuyo Matsubae, Yasushi Kondo, Shigemi Kagawa, Rokuta Inaba, Shinichiro Nakamura, Tetsuya Nagasaka, “Identifying the Substance Flow of Metals Embedded in Japanese International Trade by Use of Waste Input-Output Material Flow Analysis (WIO-MFA) Model.” ISIJ INTERNATIONAL,51(11) (2011),1934-1939
Matsubae Kazuyo, Nakajima Kenichi, Nakamura Shinichiro, Nagasaka Tetsuya, “Impact of the Recovery of Secondary Ferrous Materials from Alternative ELV Treatment Methods on CO2 Emission: A Waste Input Output Analysis.” ISIJ INTERNATIONAL, 51(1),(2011),151-157
Nansai K, Kudoh Y, Hondo H, Hayashi K, Matsubae K, Nakajima K, Murakami S, Motoshita M, Hashimoto S, Hara M, Nakajima M, Inaba R, Matsuno Y, Shinohara Y. “9th International Conference on EcoBalance (9th ICEB)-towards and beyond 2020, November 9-12, 2010, Tokyo, Japan.” International Journal of Life Cycle Assessment, 16(5) (2011),478-487

2010

S. Kashiwakura, H, Ohno, K. Matsubae-Yokoyama, Y. Kumagai, H. Kubo, and T. Nagasaka, “Removal of Arsenic in Coal Fly Ash into Dilute H2SO4 Solvent through Acid Washing Process.” Journal of Hazardous Materials,181 (2010.6),419-425
Kenichi Nakajima, Osamu Takeda, Takahiro Miki, Kazuyo Matsubae-Yokoyama, Shinichiro Nakamura and Tetsuya Nagasaka, “Thermodynamic Analysis of Contamination by Alloying Elements in Aluminum Recycling.” Environmental Science & Technology,44(14),(2010.7),5594-5600
Matsubae-Yokoyama K, Kubo H, Nagasaka T., “Recycling effects of residual slag after magnetic separation for phosphorus recovery from hot metal dephosphorization slag.” ISIJ International 50(1) (2010),65-70
Kubo H, Matsubae-Yokoyama K, Nagasaka T. “Magnetic separation of phosphorus enriched phase from multiphase dephosphorization slag.” ISIJ International,50(1),(2010),59-64
Jeong Y.-S, Kubo H, Matsubae-Yokoyama K, Nagasaka T, “Recovery of phosphorus and manganese from steelmaking slag.” AISTech - Iron and Steel Technology Conference Proceedings,(2010),137-146
Chairaksa R, Inoue Y, Matsubae-Yokoyama K, Hiraki T, Nagasaka T, “New zinc recovery process from EAF dust by lime addition.” AISTech - Iron and Steel Technology Conference Proceedings,(2010),271-281

2009

久保裕也, 松八重(横山)一代,長坂徹也, “マルチフェーズ脱リンスラグからのリン濃縮相の磁気分離. 鉄と鋼,95(3),(2009.3),300-305
松八重(横山)一代,久保裕也, 長坂徹也, “磁気分離法による溶銑脱リンスラグからのリン回収法で生成する残渣スラグのリサイクル効果” 鉄と鋼,95(3),(2009.3),306-312
S. Kashiwakura, H. Kubo, Y. Kumagai, H. Kubo, K. Matsubae-Yokoyama, K. Nakajima, and T. Nagasaka, “Removal of Boron from Coal Fly Ash by HCl Washing.” Fuel,88,(2009.1),1245-1250
Kazuyo Matsubae-Yokoyama, Hironari Kubo, Kenichi Nakajima, Tetsuya Nagasaka, “Material flow analysis of phosphorus in Japan, considering the iron and steel industry as a major sector.” Journal of Industrial Ecology13(5),(2009)687-705
Yong-Soo JEONG, Kazuyo MATSUBAE-YOKOYAMA, Hironari KUBO, Jong-Jin PAK and Tetsuya NAGASAKA, “Substance Flow Analysis of Phosphorus and Manganese Correlated with South Korean Steel Industry” Resources, Conservation and Recycling,53(9),(2009),479-489
Matsubae-Yokoyama K, Nakajima K, Nakamura S, Nagasaka T. “Rare-metal flow in steel cycle.” Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan,95(12) (2009),759-765
Nakamura S, Nakajima K, Yoshizawa Y, Matsubae-Yokoyama K, Nagasaka T. “Analyzing polyvinyl chloride in Japan with the waste input-output material flow analysis model.” Journal of Industrial Ecology,13(5) (2009),706-717

2008

NAKAJIMA Kenichi, MATSUBAE-YOKOYAMA Kazuyo, NAKAMURA Shinichiro, ITOH Satoshi and NAGASAKA Tetsuya, “Substance flow analysis of zinc associated with iron and steel cycle in Japan, and environmental assessment on its recycling process.” ISIJ International,48(10), (2008.10), 1478-1483
ITOH Satoshi, TSUBONE Akira, MATSUBAE-YOKOYAMA Kazuyo, NAKAJIMA Kenichi and NAGASAKA Tetsuya, “New EAF Dust Treatment Process with the Aid of Strong Magnetic Field.” ISIJ International,48(10),(2008.10)1339-1344
山末英嗣, 中島謙一, 醍醐市朗, 松八重(横山)一代, 橋本征二, 奥村英之, 石原慶一, “家電製品の廃棄に伴うレアメタルの潜在的拡散量評価.” 日本金属学会誌,72(8),(2008.8),587-592
横山一代,中島謙一,小野恭平,中村愼一郎,長坂徹也, “WIO-MFAおよびSFA分析を通じた我が国の鉄資源循環とマンガンフロー分析.” 鋳造工学,80(6),(2008.6)
横山一代,久保裕也,大竹久夫,長坂徹也, “廃棄物からの人工リン資源回収” 社会技術研究論文集,5,(2008.5)
NAKAJIMA Kenichi, YOKOYAMA Kazuyo and NAGASAKA Tetsuya, “Substance Flow Analysis of Manganese Associated with the Iron and Steel Cycle in Japan.” ISIJ International 48(4) (2008.4),554-558
中島謙一,横山一代,中野加都子,長坂徹也, “日本におけるフラットパネルディスプレイ用途のインジウムの物質フロー分析” 日本金属学会誌,72(2),(2008.2),99-104
“アルミドロスのマテリアルフロー分析および再利用技術の環境負荷評価.” 日本金属学会誌,72(1),(2008.1),1-7
KUBO Hironari, YOKOYAMA Kazuyo, NAKAJIMA Kenichi, HASHIMOTO Seiji, YAMAGUCHI Kazuyoshi, NAGASAKA Tetsuya, “The Application of Material Stock and Flow Accounting to Phosphorus in Japan” Journal of Environmental Engineering and Management, 18(1) (2008),47-53
Yokoyama K, Nakajima K, Nakamura S, Nagasaka T. “Material flow analysis on steel recycling considering accompanying substances” Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy,87(4) (2008),247-253
横山一代*、中島謙一、中村慎一郎、長坂徹也, “「随伴元素成分を考慮した鉄鋼リサイクルフロー分析」” 日本エネルギー学会誌,87(4)(2008)243-249

2007

NAKAJIMA Kenichi, YOKOYAMA Kazuyo, MATSUNO Yasunari and NAGASAKA Tetsuya, “Substance Flow Analysis of Molybdenum Associated with Iron and Steel Flow in Japanse Economy.” ISIJ international,47(3),(2007),510-515
K. Yokoyama, H. Kubo, K. Mori, H. Okada, S. Takeuchi and T. Nagasaka, “Separation and Recovery of Phosphorus from Steelmaking Slags with the Aid of a Strong Magnetic Field.” ISIJ International,47(10) (2007),1541-1548
K. Nakajima, K. Yokoyama, K. Nakano and T. Nagasaka, “Substance Flow Analysis of Indium for Flat Panel Displays in Japan.” Materials Transactions,48(9) (2007),2365-2369
K. Nakajima, H. Osuga, K. Yokoyama and T. Nagasaka. “Material Flow Analysis of Aluminum Dross and Environmental Assessment for Its Recycling Process.” Materials Transactions,48(8) (2007),2219-2224

2006

横山一代,久保裕也,森一広,岡田英彦,竹内秀次,長坂徹也, “強磁場を利用した製鋼スラグからのリンの分離回収” 鉄と鋼,92(11),(2006.11),683-689
K.YOKOYAMA,T.ONDA,S.KASHIWAKURA and T.NAGASAKA, “Waste Input-Output Analysis on Landfill Mining Activity.” Materials Transactions,47(10),(2006.11),2582-587
K.YOKOYAMA, T. ONDA, S. KASHIWAKURA and T. NAGASAKA, “Evaluation Of Environmental Burden And Economic Impact With "Landfill Mining Activity" Based On The Waste Input-Output Model.” Sohn International Symposium on Advanced Processing of Metals and Materials: Principles, Technologies and Industrial Practice (2006.8),383-393
横山一代, 恩田隆, 長坂徹也, “動学的廃棄物産業連関分析による最終処分場再生活動の 環境評価.” 日本LCA学会誌,2(1),(2006.1),63-69
Yokoyama K, Onda T, Kashiwakura S, Nagasaka T, “Evaluation of environmental burden and economic impact with "landfill mining activity" based on the waste input-output model” 2006 TMS Fall Extraction and Processing Division: Sohn International Symposium,9 (2006),383-393

2005

K. Yokoyama, H. Kubo, K. Mori, H. Okada and T. Nagasaka, “Steel making slags as a new phosphorus resource.” Proceedings of the International conference on Clean Thechnologies in the Steel Industry (2005.6),282-291

2004

横山一代, 中島謙一, 長坂徹也, “マテリアルフロー・アカウンティング.” 月刊化学工業,55(9),(2004.9),48-55
横山一代, “廃棄物産業連関分析の動学的拡張” 廃棄物学会論文誌,15(5),(2004.9)

2003

横山 一代, “再資源化原材料の使用が最終処分場消費に与える動学的影響予測” 第14回廃棄物学会研究発表会講演論文集,(2003.10),62-64
横山 一代, “再資源化原材料使用の環境・経済への動学的影響分析:廃棄物産業連関分析の動学的拡張の応用” 早稲田大学大学院経済学研究科 ワーキングペーパーシリーズ,(2003.5)

2002

横山 一代, “廃棄物産業連関分析の動学的拡張 建築物の長寿命化と分別に関するシナリ オ分析” エコデザイン2002ジャパンシンポジウム論文集,(2002.12),292-295
YOKOYAMA Kazuyo, “Dynamic Expansion of Waste Input-Output Analysis.” Proceedings of the Fifth International Conference on EcoBalance,(2002),671-672

2001

横山 一代, “日本の製造業における雇用の調整費用の非対称性を考慮にいれた一考察” 早稲田大学経済学研究,(52),(2001.7),57-71