ここは、プレス発表・報道関係一覧、および論文、国際会議発表（プロシーディングス）、特許などの実績を年ごとにまとめたものを載せているページです。
これとは別に受賞実績のページもあります。
（受賞実績のページはこちら）。

＜プレス発表・報道関係一覧＞
  • 2023年12月　東北大学 工学研究科・工学部 Driving Force 明日を創るチカラ #32 山本裕子
    研究室卒業生の山本裕子さんのインタビュー記事が東北大学工学研究科のウェブサイトに掲載されました。

  • 2023年8月17日　核融合科学研究所プレスリリース
    核融合炉の実現と展開を加速する高温超伝導・大電流導体の開発
    - 将来の核融合炉と次世代の核融合実験装置に適用できる安定で強い高温超伝導・大電流導体の開発に成功 -

  • 2023年8月9日　EurekAlert 「High-temperature superconducting large-current conductor with simple stacking」
    高温超伝導・大電流導体の開発に関する伊藤准教授と核融合科学研究所との共同研究の成果が英語ニュースサイト「EurekAlert」で紹介されました。

  • 2019年11月25日　ITERだより(78) 3. ITER機構インターンシップ体験記：泊瀬川 晋
    D2泊瀬川晋君のITER機構インターンシップ体験記がプラズマ核融合学会誌第95巻11号 で紹介されました。
    研究室HPでの紹介記事はこちら↓
    http://web.tohoku.ac.jp/hashizume_fan_club/conference/2019/2019_ITER_intern.html

  • 2014年7月28日　Gigazine 「日本が開発中の超伝導用磁石で10万Aの超大電流を達成、核融合炉実現に一歩近づく」
    分割型高温超伝導マグネットに関する当研究室と核融合科学研究所との共同研究の成果がニュースサイト「Gigazine」で紹介されました。

  • 2014年7月25日　EurekAlert 「Magnets for fusion energy: A revolutionary manufacturing method developed, High-temperature superconductor achieves new world record for electrical current」
    分割型高温超伝導マグネットに関する当研究室と核融合科学研究所との共同研究の成果が英語ニュースサイト「EurekAlert」で紹介されました。

  • 2014年3月31日　核融合科学研究所プレスリリース
    核融合研究が更に進展　-- 高温超伝導で１０万アンペア突破：世界記録を達成 --
    高性能の「イットリウム系」高温超伝導線材を、新しい技術を用いて大型導体化することにより、世界をリードする大電流値を達成

  • 2013年12月24日　東北大学が日本の大学として初めてITER機構と学術交流協定を締結
    協定調印式には、里見進総長、植木俊哉理事（総務・国際展開・学術基盤担当）、工学研究科・橋爪秀利教授、金属材料研究所・四竈樹男教授等関係者、ITER機構より、本島修機構長、David Campbellプラズマ制御部門長、 西村新マグネット副部長、白尾隆行機構長室長が出席して執り行われました。

  • 2013年4月9日　核融合科学研究所プレスリリース
    核融合研究がさらに前進　-- 高温超伝導導体で６万アンペアを達成 --
    核融合発電炉のマグネットに適用の見通し　導体の接続技術を東北大学大学院・量子エネルギー工学専攻と開発


    ＜論文・国際会議発表（プロシーディングス）・国内学会発表・特許一覧＞

    2024

    [Journal]

    • プロジェクトレビュー 総説 プラズマ・核融合サイエンスチャート 1. 前書き
      [プラズマ・核融合学会誌, 100(1) (2024), 3-4.]
      森芳孝，横山雅之，仲田資季，佐々木徹，後藤拓也，金子俊郎，永岡賢一，門信一郎，浅井朋彦，雨宮高久，笠田竜太，伊藤悟，上原日和，安原亮
    • プロジェクトレビュー 総説 プラズマ・核融合サイエンスチャート 3. 歴史と広がり 3.6 超伝導材料
      [プラズマ・核融合学会誌, 100(1) (2024), 35-37.]
      伊藤悟
    • Numerical analysis of the viscosity of ZrF4–BeF2 molten salts for nuclear transmutation using fusion neutron sources,
      [Fusion Engineering and Design, Accepted for Publication.]
      H. Shishido, H. Hashizume

    2023

    [Journal]

    • Integration of multiple wall thinning parameters into the probability of detection analysis for long-range pipe inspection using microwaves,
      [NDT & E International, 133 (2023), 102763.]
      Y. Guo, T. Tomizawa, F. Yu, N. Yusa, H. Hashizume
    • Evaluation of the applicability of microwave nondestructive testing to crack detection on a pipe inner surface,
      [International Journal of Applied Electromagnetics and Mechanics, 71(S1) (2023), S107-S115.]
      Y. Guo, N. Yusa, H. Hashizume
    • Initial Study on Press Welding with Indium Applied to High-temperature Superconducting DC Feeder Cables,
      [IEEE Transactions on Applied Superconductivity, 33(5) (2023), 4800405.]
      S. Ito, L. Aparicio, Y. Atake, H. Yamamoto, T. Onji, M. Tomita
    • Evaluation of the Interface Resistance on Heated REBCO Tape,
      [IEEE Transactions on Applied Superconductivity, 33(5) (2023), 6600604.]
      Y. Atake, S. Ito, K. Takahashi, H. Hashizume
    • Bending and Twisting Characteristics of REBCO Lap Joint With Indium,
      [IEEE Transactions on Applied Superconductivity, 33(5) (2023), 4201305.]
      Q. Zhang, S. Ito, H. Hashizume
    • Mechanism of Recovery Performance Improvement With Porous-Stabilized REBCO Tape for Resistive-Type Superconducting Fault Current Limiters,
      [IEEE Transactions on Applied Superconductivity, 33(5) (2023), 5600606.]
      K. Yuki, S. Ito, H. Hashizume
    • Stable operation characteristics and perspectives of the large-current HTS STARS conductor,
      [Journal of Physics: Conference Series, 2545 (2023), 012008.]
      N. Yanagi, Y. Narushima, Y. Onodera, D. Garfias-Davalos, S. Ito, Y. Terazaki, S. Hamaguchi, H. Chikaraishi, S. Takada, N. Hirano, K. Takahata
    • Heat Transfer Characteristics Evaluation of Multi-Elbow Cooling System for Fusion Divertor under One-Sided Heating,
      [Plasma and Fusion Research, 18 (2023), 2405034.]
      S. Ebara, K. Mitobe, Y. Hamaji, H. Hashizume
    • Feasibility Study on Liquid Divertor Using Molten Salt Free Surface Flow with Turbulent Promoters,
      [Plasma and Fusion Research, 18 (2023), 2405075.]
      T. Ijima, S. Sakurai, F. Takahashi, S. Ebara, H. Hashizume
    [International Conference]
    • Evaluation of the behavior of long-lived fission product compounds in molten fluoride salts for the development of transmutation target,
      [2023 Joint Symposium on Molten Salts (MS12), Kyoto, Japan, 2023/11/12-16.]
      H. Shishido, H. Hashizume
    • Numerical Prediction of the Physical Properties of Beryllium and Long-Lived Fission Product Fluoride Mixtures for Transmutation Using Fusion Neutron Sources,
      [15th International Symposium on Fusion Nuclear Technology (ISFNT 2023), Las Palmas de Gran Canaria, Spain, 2023/09/11-15.]
      H. Shishido, T. Kitasaka, H. Hashizume
    • Experimental Study of Boiling Heat Transfer Characteristics of Multi-Elbow Cooling System under One-sided Heating with Long Area for Fusion Divertor Cooling,
      [15th International Symposium on Fusion Nuclear Technology (ISFNT 2023), Las Palmas de Gran Canaria, Spain, 2023/09/11-15.]
      S. Nakano, Y. Hamaji, S. Ebara, H. Hashizume
    [国内学会発表]
    • マイクロ波を用いた配管減肉形状評価における減肉端部形状の周波数領域信号への影響評価,
      [日本非破壊検査協会 東北支部 第10回 支部会・講演会，エル・ソーラ仙台（宮城県仙台市），2023/04/14.]
      吉川諒，Guo Yijun，遊佐訓孝，橋爪秀利
    • マイクロ波を用いた配管減肉形状評価における減肉端部形状および配管口径に対する周波数領域信号評価,
      [日本保全学会第19回学術講演会，東北大学片平キャンパス・川内北キャンパス（宮城県仙台市），2023/08/27-29.]
      吉川諒，Guo Yijun，宍戸博紀，遊佐訓孝，橋爪秀利
    • REBCO線材の臨界電流と層間抵抗率の加熱温度・時間依存性評価,
      [2023年度秋季（第106回）低温工学・超電導学会研究発表会，海峡メッセ下関（山口県下関市），2023/12/4-6.]
      伊藤悟，阿竹洋輔，佐藤光一，橋爪秀利
    • 燃料組成の調整による可変スペクトル溶融塩炉の研究 (2) 分子動力学法を用いたLiF-BeF2-ZrF4-UF4混合溶融塩の密度評価,
      [日本原子力学会2024年春の年会，近畿大学東大阪キャンパス（大阪府東大阪市），2024/03/26-28.]
      宍戸博紀，橋爪秀利，相澤 直人
    • 分割型高温超伝導マグネット接合部のせん断強度の高精度評価法の検討,
      [日本原子力学会2024年春の年会，近畿大学東大阪キャンパス（大阪府東大阪市），2024/03/26-28.]
      芦口鉄矢，アパリシオルイス，伊藤悟，橋爪秀利

    2022

    [Journal]

    • Impact of Current Transfer to Porous Stabilizer on Recovery Performance of Resistive-Type Superconducting Fault Current Limiters Using REBCO Tapes,
      [IEEE Transactions on Applied Superconductivity, 32(4) (2022), 5600207.]
      K. Yuki, S. Ito, H. Hashizume
    • Experimental investigation on bend-region crack detection using TE11 mode microwaves,
      [Nondestructive Testing and Evaluation, 37(1) (2022), 71-80.]
      G. Chen, T. Katagiri, N. Yusa, H. Hashizume
    • Quantitative evaluation of pipe wall thinning defect sizes using microwave NDT,
      [Nondestructive Testing and Evaluation, 37(6) (2022), 737-753.]
      Y. Guo, G. Chen, T. Katagiri, N. Yusa, H. Hashizume
    • Progress of HTS STARS Conductor Development for the Next-Generation Helical Fusion Experimental Device,
      [Plasma and Fusion Research, 17 (2022), 2405076.]
      N. Yanagi, Y. Terazaki, Y. Narushima, Y. Onodera, N. Hirano, S. Hamaguchi, H. Chikaraishi, S. Takada, S. Ito, K. Takahata
    • Evaluation of magnetic field dependence of the interface resistivity in REBCO tape,
      [IEEE Transactions on Applied Superconductivity, 32(6) (2022), 4803205.]
      Y. Atake, S. Ito, K. Takahashi, H. Hashizume
    [International Conference]
    • Evaluation of the applicability of microwave nondestructive testing to detection of cracking on the inner surface of a pipe,
      [20th International Symposium on Applied Electromagnetics and Mechanics (ISEM) 2022, Online, 2021/06/05-08.]
      Y. Guo, N. Yusa, H. Hashizume
    • Probability of detection considering both the depth and circumferential length of pipe wall thinning using microwave NDT,
      [25th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE'22), Online, 2021/06/13-15.]
      Y. Guo, N. Yusa, H. Hashizume
    • R&D of low-resistance joint of HTS STARS conductors with indium insertion,
      [10th Workshop of Mechanical and Electro-Magnetic Properties of Composite Superconductors (MEM) together with the 5th HTS4fusion Conductor Workshop, Online, 2021/06/26-07/01.]
      S. Ito, N. Yanagi, H. Tamura, H. Hashizume
    • Initial Study on Press Welding with Indium Applied to High-temperature Superconducting DC Feeder Cables,
      [Applied Superconductivity Conference 2022 (ASC 2022), Honolulu, USA, 2022/10/23-28.]
      S. Ito, L. Aparicio, Y. Atake, H. Yamamoto, T. Onji, M. Tomita
    • Bending and Twisting Characteristics of REBCO Lap Joint with Indium,
      [Applied Superconductivity Conference 2022 (ASC 2022), Honolulu, USA, 2022/10/23-28.]
      Q. Zhang, S. Ito, H. Hashizume
    • Interface resistance evaluation on REBCO tape in various magnetic field directions,
      [Applied Superconductivity Conference 2022 (ASC 2022), Honolulu, USA, 2022/10/23-28.]
      Y. Atake, S. Ito, K. Takahashi, H. Hashizume
    • Feasibility Study on Liquid Divertor Using Molten Salt Free Surface Flow with Turbulent Promoters,
      [The 31st International Toki Conference on Plasma and Fusion Research (ITC31), Online, 2022/11/8-11.]
      T. Ijima, S. Ebara, H. Hashizume
    [国内学会発表]
    • 液体金属ブランケットにおけるMHD圧力損失を低減させるための流路構造の基礎検討,
      [第22回日本伝熱学会東北支部学生発表会，オンライン，2022/05/07.]
      落合信吉，伊藤悟，橋爪秀利
    • Evaluation of the circumferential position and circumferential length of wall thinning on the inner surface of a pipe using microwave NDT signals，
      [第34回｢電磁力関連のダイナミクス｣シンポジウム(SEAD34)，仙台市宮城野区文化センター（宮城県仙台市），2022/05/11-13.]
      郭一君，遊佐訓孝，程衛英，橋爪秀利
    • 高温超伝導ケーブルに適用するインジウム圧接の接合性能の接合条件依存性評価，
      [2022年度春季 第103回 低温工学・超電導学会研究発表会，タワーホール船堀（東京都江戸川区），2022/06/20-22.]
      伊藤悟，阿竹洋輔，山本春海，恩地太紀，富田優
    • REBCO線材内部層間抵抗の臨界温度までの温度依存性評価，
      [2022年度春季 第103回 低温工学・超電導学会研究発表会，タワーホール船堀（東京都江戸川区），2022/06/20-22.]
      阿竹洋輔，伊藤悟，高橋弘紀，橋爪秀利
    • 分割型高温超伝導マグネットのための接合抵抗分析研究および照射特性研究の現状，
      [第14回核融合エネルギー連合講演会，オンライン，2022/07/07-08.]
      伊藤悟，橋爪秀利
    • 乱流促進体を用いた溶融塩液体ダイバータの実現可能性の検討，
      [第14回核融合エネルギー連合講演会，オンライン，2022/07/07-08.]
      江原真司，高橋史弥，橋爪秀利
    • 核変換機能を有する核融合炉を導入した核燃料サイクルにおける重元素フローの評価，
      [第14回核融合エネルギー連合講演会，オンライン，2022/07/07-08.]
      宍戸博紀，清水雅生，西原遥，橋爪秀利
    • 核融合マグネットの分割製造のためのインジウムを用いたREBCOラップ接合の曲げ捻り特性評価，
      [第14回核融合エネルギー連合講演会，オンライン，2022/07/07-08.]
      張啓帆，伊藤悟，橋爪秀利
    • トロイダル方向流路を採用した自己冷却江北金属ブランケット構造の基礎検討，
      [第14回核融合エネルギー連合講演会，オンライン，2022/07/07-08.]
      落合信吉，伊藤悟，田中照也，橋爪秀利
    • 核変換ターゲット開発に向けた機械学習分子動力学計算によるBe2-CsFの物性評価，
      [日本原子力学会 2022年秋の大会，茨城大学日立キャンパス（茨城県日立市），2022/09/07-09.]
      軒天太，宍戸博紀，橋爪秀利
    • 分割型高温超伝導用機械的エッジジョイントにおける接合抵抗の温度磁場依存性分析，
      [日本原子力学会東北支部第46回研究交流会，オンライン，2022/11/28.]
      鈴木和也，伊藤悟，橋爪秀利
    • 分割型高温超伝導マグネット用機械的エッジジョイントの接合抵抗の導体構造・温度磁場依存性評価，
      [日本原子力学会2023年春の年会，東京大学駒場キャンパス（東京都目黒区），2023/03/13-15.]
      鈴木和也，伊藤悟，橋爪秀利

    2021

    [Journal]

    • Effect of Electrical and Thermal Properties of Porous-Stabilized REBCO Tape on Recovery Performance,
      [IEEE Transactions on Applied Superconductivity, 31(5) (2021), 4600906.]
      K. Yuki, S. Ito, H. Hashizume
    • Quench Detection Performance of Low-Temperature Superconducting Quench Detectors for REBCO Tape in Magnetic Fields,
      [IEEE Transactions on Applied Superconductivity, 31(5) (2021), 4701605.]
      S. Hasegawa, S. Ito, G. Nishijima, H. Hashizume
    • Low-resistance joint development for segment-fabrication of high-temperature superconducting fusion magnets,
      [Nuclear Fusion, 61(11) (2021), 115002.]
      S. Ito, H. Tamura, N. Yanagi, H. Hashizume
    • Demonstration of detection of the multiple pipe wall thinning defects using microwaves,
      [Measurement, 175 (2021), 109074.]
      T. Katagiri, G. Chen, N. Yusa, H. Hashizume
    • Frequency properties of a flexible printed circuit coil and inductive measurement of conductivity,
      [AIP Advances 11(1) (2021), 015133.]
      W. Cheng, H. Hashizume
    • Multivariate probability of detection (POD) analysis considering the defect location for long-range, non-destructive pipe inspection using electromagnetic guided wave testing,
      [NDT & E International 124 (2021), 102539.]
      G. Chen, Y. Guo, T. Katagiri, H. Song, T. Tomizawa, N.Yusa, H. Hashizume
    [International Conference]
    • Low-resistance joint development for segment-fabrication of high-temperature superconducting fusion magnets,
      [28th IAEA Fusion Energy Conference (FEC 2020), Online, 2021/05/10-14.]
      S. Ito, H. Tamura, N. Yanagi, H. Hashizume
    • Evaluation of the Applicability of Plutonium Transmuted From Minor Actinides by Fusion Reactor as Fertile Fuel in Boiling Water Reactor,
      [28th International Conference on Nuclear Engineering (ICONE28), Online, 2021/05/10-14.]
      M. Shimizu, H. Shishido, H. Hashizume
    • Impact of current relocation to porous stabilizer on recovery performance of resistive-type superconducting fault current limiters using REBCO tapes,
      [The 15th European Conference on Applied Superconductivity (EUCAS2021), Online, 2021/09/05-09.]
      K. Yuki, S. Ito, H. Hashizume
    • Frequency Spectrum Analysis of Microwave Signals Reflected from Partial Pipe Wall Thinning,
      [18th International Conference on Flow Dynamics (ICFD 2021), Online, 2021/10/27-29.]
      Y. Guo, G. Chen, N. Yusa, H. Hashizume
    • Evaluation of magnetic field dependence of interface resistivity in REBCO tape with contact-probing CTL method,
      [The 27th International Conference on Magnet Technology (MT27), Fukuoka, 2021/11/15-19.]
      Y. Atake, S. Ito, K. Takahashi, H. Hashizume
    • Joint resistance evaluation of longer HTS tape joints with indium insertion,
      [The 27th International Conference on Magnet Technology (MT27), Fukuoka, 2021/11/15-19.]
      S. Ito, L. Aparicio, Y. Atake, K. Yuki, H. Hashizume
    • Current status of technical development for segment-fabrication of high-temperature superconducting fusion magnet,
      [The 30th International Toki Conference on Plasma and Fusion Research (ITC30), Online, 2021/11/16-19.]
      S. Ito, H. Tamura, N. Yanagi, H. Hashizume
    [国内学会発表]
    • コンタクトプローブCTL法を用いた磁場中におけるREBCO線材内部層間抵抗の評価，
      [2021年度春季（第101回）低温工学・超電導学会研究発表会，オンライン，2021/05/19-21.]
      阿竹洋輔，伊藤悟，高橋弘紀，橋爪秀利
    • 高温超伝導ケーブルに適用するインジウム低温熱処理機械的接合の初期検討，
      [2021年度春季（第101回）低温工学・超電導学会研究発表会，オンライン，2021/05/19-21.]
      伊藤悟，アパリシオルイス，阿竹洋輔，結城光平，橋爪秀利，恩地太紀，赤坂友幸，石原篤，富田優
    • ポーラス安定化材への電流転流による抵抗型超伝導限流器用REBCO線材の復帰性能向上，
      [2021年度春季（第101回）低温工学・超電導学会研究発表会，オンライン，2021/05/19-21.]
      結城光平，伊藤悟，橋爪秀利
    • 核融合炉によるMA核変換より生成される偶数Puを層化した高速炉炉心特性評価，
      [日本原子力学会 2021年秋の大会，オンライン，2021/09/08-10.]
      宍戸博紀，清水雅生，橋爪秀利
    • Evaluation of Electrical Performance of REBCO Tapes in Proton Irradiation，
      [日本原子力学会東北支部第45回研究交流会，オンライン，2022/01/13.]
      馬宇傑，伊藤悟，三輪美沙子，遠山翔，松山成男，橋爪秀利
    • Evaluation of Bending Characteristic of Lap Joint of REBCO Tapes for Segment-Fabrication of Fusion Magnets，
      [日本原子力学会東北支部第45回研究交流会，オンライン，2022/01/13.]
      張啓帆，伊藤悟，橋爪秀利
    • Experimental Study of Porous Cooling System Characteristics with Different Heating Directions，
      [日本原子力学会東北支部第45回研究交流会，オンライン，2022/01/13.]
      Romain Wagner, Kohei Yuki, Satoshi Ito, Hidetoshi Hashizume
    • Evaluation of Temperature Effect in Proton Irradiation on Critical Current Behavior of REBCO Tapes，
      [日本原子力学会 2022年春の年会，オンライン，2022/03/16-18.]
      馬宇傑，伊藤悟，三輪美沙子，遠山翔，松山成男，橋爪秀利
    • Joint Performance Evaluation of Curved REBCO Lap Joint for Segment-Fabrication of Fusion Magnets，
      [日本原子力学会 2022年春の年会，オンライン，2022/03/16-18.]
      張啓帆，伊藤悟，橋爪秀利
    • Buoyancy Force Direction Influence on Porous Cooling System Characteristics for Remountable High Temperature Superconducting Magnets，
      [日本原子力学会 2022年春の年会，オンライン，2022/03/16-18.]
      Romain Wagner, Kohei Yuki, Satoshi Ito, Hidetoshi Hashizume

    2020

    [Journal]

    • Recovery performance of partially-joined porous-stabilized REBCO tape for RSFCL,
      [Superconductor Science and Technology, 33(3) (2020), 034002.]
      K. Yuki, S. Ito, H. Hashizume
    • Quantitative evaluation of the delamination length in mechanical lap joints of high-temperature superconducting tapes using Lamb waves,
      [Measurement, 156 (2020), 107606.]
      B. Feng, W Chen, S. Ito, N. Yusa, H. Hashizume, A. L.Ribeiro, H. G. Ramos
    • Investigation for Contact Interface of Mechanical Lap Joint Fabricated with High-Temperature Superconducting Conductor Using X-Ray Microtomography,
      [Plasma and Fusion Research, 15 (2020), 2405014.]
      W. Chen, S. Ito, N. Yusa, H. Hashizume
    • In-depth resistance analysis of REBCO tape joints with indium insert and solders,
      [Journal of Physics: Conference Series, 1559 (2020), 012034.]
      R. Hayasaka, S. Ito, T. Kato, D. Yokoe, H. Hashizume
    • Effect of non-uniform proton irradiation on the critical current of REBCO tapes,
      [Journal of Physics: Conference Series, 1559 (2020), 012045.]
      H. Yamamoto, S. Ito, M. Miwa, S. Matsuyama, H. Hashizume
    • Joining condition dependency of joint resistance in ultrasonic welding of high-temperature superconducting tapes with indium,
      [Journal of Physics: Conference Series, 1559 (2020), 012065.]
      S. Ito, R. Hayasaka, K. Yuki, Y.S. Sato, H. Hashizume
    • Investigation of trade-off solution in mechanical edge joint of STARS conductors,
      [Journal of Physics: Conference Series, 1559 (2020), 012110.]
      S. Sato, S. Ito, H. Hashizume
    • In-pipe crack detection for multiple diameters using TE11 mode microwaves,
      [International Journal of Applied Electromagnetics and Mechanics, 64(1-4) (2020), 39-46.]
      G. Chen, T. Katagiri, N. Yusa, H. Hashizume
    • Experimental verification of a TE01 mode converter to locate a crack in a metal pipe,
      [International Journal of Applied Electromagnetics and Mechanics, 64(1-4) (2020), 465-472.]
      T. Katagiri, G. Chen, N. Yusa, H. Hashizume
    • Neutronic and Thermophysical Characteristics Evaluation of Molten Salts Specialized for LLFP Transmutation in a Fusion Reactor,
      [Plasma and Fusion Research, 15, (2020), 2405077]
      T. Kitasaka, H. Shishido, H. Hashizume
    • Investigation of the crystallization process of CSD-ErBCO on IBAD-substrate via DSD approach,
      [Scientific Reports, 10, (2020), 19934]
      R. Hayasaka, P. Cayado, M. Erbe, W. Freitag, J. Hanisch, B. Holzapfel, S. Ito, H. Hashizume
    • Design of a Dual-port, Side-incident Microwave Probe for Detection of In-Pipe Damage,
      [Measurement Science and Technology, 31(12) (2020) 125001.]
      G. Chen, T. Katagiri, N. Yusa, H. Hashizume
    • Investigation of the Effect of a Bend on Pipe Inspection Using Microwave NDT,
      [NDT&E International, 110 (2020), 102208.]
      G. Chen, T. Katagiri, S. Haicheng, N. Yusa, H. Hashizume
    [International Conference]
    • Evaluation of Boiling Heat Transfer Characteristics of a Downstream Flow Field in Multi-Elbow Piping System for Divertor Cooling of a Fusion Reactor,
      [31st Symposium on Fusion Technology (SOFT2020), Online, 2020/09/20-25.]
      K. Mitobe, H. Kawakami, Y. Hamaji, S. Ebara, H. Hashizume
    • Different HTS tapes joint with indium-insertion using low-temperature heat treatment,
      [Applied Superconductivity Conference 2020 (ASC2020), Online, 2020/10/24-11/07.]
      S. Ito, R. Hayasaka, K. Yuki, H. Hashizume
    • Quench Detection Performance of Low-temperature Superconducting Quench Detectors for REBCO Coil in Magnetic Fields,
      [Applied Superconductivity Conference 2020 (ASC2020), Online, 2020/10/24-11/07.]
      S. Hasegawa, S. Ito, G. Nishijima, H. Hashizume
    • Effect of Electrical and Thermal Properties of Porous-Stabilized REBCO Tape on Current-Limiting and Recovery Performances,
      [Applied Superconductivity Conference 2020 (ASC2020), Online, 2020/10/24-11/07.]
      K. Yuki, S. Ito, H. Hashizume
    [国内学会発表]
    • Vノッチせん断試験アプローチを用いたREBCO線材のIn接合のせん断強度解析，
      [2020年度春季（第99回）低温工学・超電導学会研究発表会，オンライン，2020/07/28-30.]
      アパリシオルイス，伊藤悟，橋爪秀利
    • 超伝導クエンチ検出器のクエンチ検出性能支配因子の検討，
      [2020年度春季（第99回）低温工学・超電導学会研究発表会，オンライン，2020/07/28-30.]
      泊瀬川晋，伊藤悟，西島元，橋爪秀利
    • 抵抗型超伝導限流器の高速復帰に向けたポーラス安定化材付REBCO線材の電磁・熱特性に関する検討，
      [2020年度春季（第99回）低温工学・超電導学会研究発表会，オンライン，2020/07/28-30.]
      結城光平，伊藤悟，橋爪秀利
    • 廃止措置における配管減肉の予測とモニタリングに基づく配管システムのリスク管理 （8）可視化実験によるエルボ内固液混相流への固体密度の影響評価，
      [日本原子力学会2020年秋の大会，オンライン，2021/09/16-18.]
      江原真司
    • 核融合中性子を用いた MA核変換により生成されたPuの軽水炉燃料利用可能性の検討，
      [日本原子力学会2020年秋の大会，オンライン，2021/09/16-18.]
      清水雅生，宍戸博紀，橋爪秀利
    • シンポジウム「2030年代以降を見据えたプラズマ・核融合科学の学術課題」パネリスト（炉工学の学術課題），
      [第37回プラズマ・核融合学会年会，オンライン，2020/12/01-04.]
      江原真司
    • シンポジウム「高温超伝導技術が切り拓く新たな核融合研究展開」パネリスト（趣旨説明），
      [第37回プラズマ・核融合学会年会，オンライン，2020/12/01-04.]
      橋爪秀利
    • シンポジウム「高温超伝導技術が切り拓く新たな核融合研究展開」パネリスト（着脱式先進高温超伝導マグネット技術），
      [第37回プラズマ・核融合学会年会，オンライン，2020/12/01-04.]
      伊藤悟
    • 高温超伝導線材のインジウム低熱処理機械的接合の改善，
      [2020年度秋季（第100回）低温工学・超電導学会研究発表会，京都大学吉田キャンパス（京都府京都市），2020/12/08-10.]
      伊藤悟，早坂遼一路，結城光平，阿竹洋輔，橋爪秀利，加藤 丈晴，横江 大作
    • 共巻き低温超伝導線材によるREBCOパンケーキコイルのクエンチ検出の実証，
      [2020年度秋季（第100回）低温工学・超電導学会研究発表会，京都大学吉田キャンパス（京都府京都市），2020/12/08-10.]
      泊瀬川晋，伊藤悟，西島元，橋爪秀利
    • 抵抗型超伝導限流器の復帰時間短縮を目的とした金属ポーラス体利用によるREBCO線材の高速冷却，
      [2020年度秋季（第100回）低温工学・超電導学会研究発表会，京都大学吉田キャンパス（京都府京都市），2020/12/08-10.]
      結城光平，伊藤悟，橋爪秀利
    • 数値解析による液体Flibeダイバータの乱流熱輸送評価，
      [日本原子力学会東北支部第44回研究交流会，オンライン，2020/12/14.]
      高橋史弥，江原真司，橋爪秀利
    • 核融合によるMA核変換から生成されるPuの軽水炉利用可能性の検討，
      [日本原子力学会東北支部第44回研究交流会，オンライン，2020/12/14.]
      清水雅生，宍戸博紀，橋爪秀利
    • MHD液膜流に挿入した電磁力制御フィンの流動撹拌性能に関する実験的評価，
      [日本原子力学会2021年春の年会，オンライン，2021/03/17-19.]
      川本誠，伊藤悟，橋爪秀利

    2019

    [Journal]

    • Progress in the Conceptual Design of the Helical Fusion Reactor FFHR-d1
      [Journal of Fusion Energy, 38(1) (2019), 147-161.]
      N. Yanagi, T. Goto, J. Miyazawa, H. Tamura, Y. Terazaki, S. Ito, T. Tanaka, H. Hashizume, A. Sagara
    • Comparison of heat assisted lap joints of high-temperature superconducting tapes with inserted indium foils
      [IEEE Transactions on Applied Superconductivity, 29(5) (2019), 6600405.]
      S. Ito, H. T. Fujii, R. Hayasaka, Y. S. Sato, H. Hashizume
    • Evaluation of Interface Resistance in a REBCO Tape at Different Temperatures by Contact-probing Current Transfer Length Method
      [IEEE Transactions on Applied Superconductivity, 29(5) (2019), 9000805.]
      R. Hayasaka, S. Ito, H. Hashizume
    • Fundamental Evaluations of Applicability of LTS Quench Detectors to REBCO Pancake Coil
      [IEEE Transactions on Applied Superconductivity, 29(5) (2019), 9001305.]
      S. Hasegawa, S. Ito, G. Nishijima, H. Hashizume
    • Bridge-type mechanical lap joint of HTS STARS conductors using an integrated joint piece,
      [Fusion Engineering and Design,146(A) (2019), 590-593.]
      S. Ito, H. Hashizume, N. Yanagi, H. Tamura
    • Effect of coil configuration parameters on the mechanical behavior of the superconducting magnet system in the helical fusion reactor FFHR,
      [Fusion Engineering and Design, 146(A) (2019), 586-589.]
      H. Tamura, T. Goto, N. Yanagi, J. Miyazawa, T. Tanaka, A. Sagara, S. Ito, H. Hashizume
    • Heat transfer enhancement in a MHD free-surface flow by controlling the electromagnetic force with a fin structure,
      [Fusion Engineering and Design, 146(B) (2019), 2671-2675.]
      M. Kawamoto, K. Muraoka, S. Ito, H. Hashizume
    • 核融合炉マグネットへの適用をめざした大電流高温超伝導導体の開発　― 現在の状況と将来の展望 ―,
      [低温工学, 54(1) (2019), 10-22.]
      柳 長門, 伊藤 悟, 寺ｱ 義朗
    • Characterization of multilayered structures by swept-frequency eddy current testing,
      [AIP Advances 9 (2019), 035009.]
      W. Cheng, H. Hashizume
    • Mechanical Design Concept of Superconducting Magnet System for Helical Fusion Reactor,
      [Fusion Science and Technology, 75 (2019), 384-390.]
      H. Tamura, N. Yanagi, T. Goto, J. Miyazawa, T. Tanaka, A. Sagara, S. Ito, H. Hashizume
    • Investigation of the correlation between the electrical contact resistance and the contact area of mechanical lap joint fabricated with high-temperature superconducting tapes using X-ray microtomography,
      [Fusion Engineering and Design, 148 (2019), 111284.]
      W. Chen, S. Ito, N. Yusa, H. Hashizume
    • Detection of cracks with arbitrary orientations in a metal pipe using linearly-polarized circular TE11 mode microwaves,
      [NDT&E International 107 (2019), 102125.]
      G. Chen, T. Katagiri, H. Song, N. Yusa, H. Hashizume
    • Long-range inspection of a pipe with a bend using microwaves,
      [International Journal of Applied Electromagnetics and Mechanics, 59(4) (2019), 1519-1526.]
      S. Uoshita, K. Sasaki, T. Katagiri, N. Yusa, H. Hashizume
    • Proposal of a TEM to TE01 mode converter for a microwave nondestructive inspection of axial flaws appearing on the inner surface of a pipe with an arbitrary diameter,
      [International Journal of Applied Electromagnetics and Mechanics, 59(4) (2019), 1527-1534.]
      T. Katagiri, K. Sasaki, S. Haicheng, N. Yusa, H. Hashizume
    [International Conference]
    • Joining condition dependency of joint resistance in ultrasonic welding of high-temperature superconducting tapes with indium,
      [14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, Scotland, 2019/09/01-05.]
      S. Ito, R. Hayasaka, K. Yuki, Y.S. Sato, H. Hashizume
    • Recovery performance of partially-joined porous-stabilized REBCO tape for RSFCL,
      [14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, Scotland, 2019/09/01-05.]
      K. Yuki, S. Ito, H. Hashizume
    • In-depth resistance analysis of REBCO tape joints with indium insert and solders,
      [14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, Scotland, 2019/09/01-05.]
      R. Hayasaka, S. Ito, T. Kato, D. Yokoe, H. Hashizume
    • Effect of non-uniform proton irradiation on the critical current of REBCO tapes,
      [14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, Scotland, 2019/09/01-05.]
      H. Yamamoto, S. Ito, M. Miwa, S. Matsuyama, H. Hashizume
    • Investigation of trade-off solution in mechanical edge joint of STARS conductors,
      [14th European Conference on Applied Superconductivity (EUCAS 2019), Glasgow, Scotland, 2019/09/01-05.]
      S. Sato, S. Ito, H. Hashizume
    • Improved Design of A Side-Incident Microwave Probe for Non-Destructive Inspection Of Metallic Pipes,
      [The 24th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE2019), Chengdu, China, 2019/09/11-14.]
      G. Chen, T. Katagiri, N. Yusa, H. Hashizume
    • Development of a Signal Processing Method for Metal Pipe Inspection Using Multi-Mode Microwaves,
      [The 24th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE2019), Chengdu, China, 2019/09/11-14.]
      T. Katagiri, G. Chen, N. Yusa, H. Hashizume
    • In-pipe Crack Detection for Multiple Diameters Using TE11 Mode Microwaves,
      [The 19th International Symposium on Applied Electromagnetics and Mechanics (ISEM2019), Nanjing, China, 2019/09/16-18.]
      G. Chen, T. Katagiri, N. Yusa, H. Hashizume
    • Experimental Verification of a TE01 Mode Converter to Locate a Crack in a Metal Pipe,
      [The 19th International Symposium on Applied Electromagnetics and Mechanics (ISEM2019), Nanjing, China, 2019/09/16-18.]
      T. Katagiri, G. Chen, N. Yusa, H. Hashizume
    • Development of Nondestructive Evaluation Technique for Mechanical Lap Joint Fabricated with High-Temperature Superconducting Conducter Using X-ray Microtomography,
      [The 28th International Toki Conference on Plasma and Fusion Research, Toki, Gifu, Japan, 2019/09/05-08.]
      W. Chen, S. Ito, N. Yusa, H. Hashizume
    • Neutronic and Thermophysical Characteristics Evaluation of Molten Salts Specialized for LLFPs Transmutation in a Fusion Reactor,
      [The 28th International Toki Conference on Plasma and Fusion Research, Toki, Gifu, Japan, 2019/11/05-08.]
      T. Kitasaka, H. Shishido, H. Hashizume
    • Fabrication of longer HTS tape joints with indium insertion,
      [10th ACASC/2nd Asian ICMC/CSSJ Joint Conference, Ginowan, Okinawa, Japan, 2020/01/06-09.]
      S. Ito, R. Hayasaka, K. Yuki, H. Hashizume
    • Investigation on optimal designs of superconducting quench detectors for REBCO coils,
      [10th ACASC/2nd Asian ICMC/CSSJ Joint Conference, Ginowan, Okinawa, Japan, 2020/01/06-09.]
      S. Hasegawa, S. Ito, G. Nishijima, H. Hashizume
    • Recovery and Current-Limiting Performances of Porous-Stabilized REBCO Tape with Several Joining Conditions for RSFCL,
      [10th ACASC/2nd Asian ICMC/CSSJ Joint Conference, Ginowan, Okinawa, Japan, 2020/01/06-09.]
      K. Yuki, S. Ito, H. Hashizume
    [国内学会発表]
    • 核融合炉ダイバータ冷却に向けた3段エルボ下流流動場の沸騰伝熱特性評価，
      [第19回日本伝熱学会東北支部学生発表会，東北大学片平キャンパス（宮城県仙台市），2019/05/11.]
      水戸部憲哉，浜地志憲，江原真司，橋爪秀利
    • 高温超伝導線材のインジウム挿入超音波接合：接合性能のホーン・接合時間依存性評価，
      [第98回（2019年度春季）低温工学・超電導学会，ノバホール，つくばイノベーションプラザ（茨城県つくば市），2019/05/28-30.]
      伊藤悟，早坂遼一路，佐藤裕，橋爪秀利
    • ポーラス安定化材付REBCO線材における超伝導復帰性能のインジウム接合条件依存性評価，
      [第98回（2019年度春季）低温工学・超電導学会，ノバホール，つくばイノベーションプラザ（茨城県つくば市），2019/05/28-30.]
      結城光平，伊藤悟，橋爪秀利
    • REBCO線材の臨界電流におけるピン配置依存性の基礎評価，
      [第98回（2019年度春季）低温工学・超電導学会，ノバホール，つくばイノベーションプラザ（茨城県つくば市），2019/05/28-30.]
      山本春海，伊藤悟，橋爪秀利
    • 銅ジャケット付きREBCO積層導体の機械的エッジジョイントにおける接合抵抗の低減，
      [第98回（2019年度春季）低温工学・超電導学会，ノバホール，つくばイノベーションプラザ（茨城県つくば市），2019/05/28-30.]
      佐藤颯太郎，伊藤悟，橋爪秀利
    • 複数モードのマイクロ波を利用した金属配管内表面のきず位置推定手法の高精度化，
      [日本保全学会第16回学術講演会，リンクステーションホテル青森（青森県青森市），2019/07/24-26.]
      片桐拓也，陳冠任，遊佐訓孝，橋爪秀利
    • 配管減肉のモニタリングと予測に基づく配管システムのリスク管理 (2)固液混相流エルボ内流れの可視化実験，
      [日本保全学会第16回学術講演会，リンクステーションホテル青森（青森県青森市），2019/07/24-26.]
      江原真司
    • 設計余裕度向上のための機能材料添加溶融塩ブランケットの核的特性評価，
      [日本原子力学会2019年秋の大会，富山大学五福キャンパス（富山県富山市），2019/09/11-13.]
      宍戸博紀，橋爪秀利
    • 核融合溶融塩ブランケットにおける長寿命核分裂生成物の核変換を目的とした溶融塩の検討，
      [日本原子力学会2019年秋の大会，富山大学五福キャンパス（富山県富山市），2019/09/11-13.]
      北坂卓，宍戸博紀，橋爪秀利
    • MHD流れ制御による液体金属内気泡導入技術の基礎検討，
      [日本原子力学会東北支部第43回研究交流会，東北大学青葉山キャンパス（宮城県仙台市），2019/12/13.]
      中村叶希，伊藤悟，橋爪秀利

    2018

    [Journal]

    • Scenario construction of MA transmutation in Japan using fusion reactor,
      [Progress in Nuclear Energy 103 (2018), 28-32.]
      Y. Furudate, H. Shishido, N. Yusa, H. Hashizume
    • Numerical and Experimental Evaluations of the Quench Detection Performance of a YBCO/Nb-Tid Tape,
      [IEEE Transactions on Applied Superconductivity, 28(3) (2018), 4700605.]
      S. Hasegawa, S. Ito, H. Hashizume
    • Advanced high-temperature superconducting magnet for fusion reactors: Segment fabrication and joint technique,
      [Fusion Engineering and Design, 136(A) (2018), 239-246.]
      S. Ito, H. Hashizume, N. Yanagi, T. Tamura
    • Proposal of fluid stirring by multi-layered trenches for liquid metal divertor,
      [Fusion Engineering and Design, 136(A) (2018), 415-419.]
      M. Kawamoto, K. Muraoka, S. Ito, H. Hashizume
    • Comparison of Shear Strength and Failure Mechanisms of Lap Joint between REBCO Tapes Bonded by Different Joining Techniques,
      [Fusion Engineering and Design, 136(B) (2018), 1196-1201.]
      L.E. Aparicio, S. Ito, H. Hashizume
    • 配管内管軸方向割れ検出のためのTEモードのマイクロ波を用いた配管広域一括検査技術の開発,
      [日本機械学会論文集, 84 (2018), 17-00375]
      片桐 拓也, 佐々木 幸太, 遊佐 訓孝, 橋爪 秀利
    • Experimental verification of long-range microwave pipe inspection of using straight pipes with lengths of 19-26.5 m,
      [NDT&E International, 96 (2018), 47-57.]
      K. Sasaki, T. Katagiri, N. Yusa, H. Hashizume
    • Development of a High Energy Hydrogen Beam Injection System for Divertor Plasma Simulation Experiments on the DT-ALPHA Device,
      [Plasma and Fusion Research, 13 (2018), 3402102.]
      P. Boonyarittipong, H. Takahashi, S. Kitajima, A. Okamoto, K. Tobita, T. Kobayashi, T. Saikyo, Y. Ishikawa, K. Ogasawara, H. Hashizume
    • Development of Ion Sensitive Probe and Its Application to RF Plasma Device DT-ALPHA,
      [Plasma and Fusion Research, 13 (2018), 3401090.]
      T. Kobayashi, H. Takahashi, S. Kitajima, A. Okamoto, K. Tobita, P. Boonyarittipong, T. Saikyo, Y. Ishikawa, K. Ogasawara, H. Hashizume
    • Divertor Plasma Simulation Experiment Using Hydrogen Ionizing Plasma and Helium Ion Beam in an RF Plasma Source DT-ALPHA,
      [Plasma and Fusion Research, 13 (2018), 3401053.]
      H. Takahashi, T. Kobayashi, P. Boonyarittipong, T. Saikyo, Y. Ishikawa, K. Ogasawara, A. Okamoto, K. Tobita, S. Kitajima, H. Hashizume
    • Probability of detection analyses of eddy current data for the detection of corrosion,
      [Nondestructive Testing and Diagnostics, 4 (2018), 3-7.]
      N. Yusa, T. Tomizawa, H. Song, H. Hashizume
    • Application of low-frequency eddy current testing to the inspection of a double-walled tank in a reprocessing plant,
      [Nondestructive Testing and Evaluation, 33 (2018), 189-197. ]
      N. Tajima, N. Yusa, H. Hashizume
    • Application of low-frequency eddy current testing to the inspection of a double-walled tank in a reprocessing plant,
      [Nondestructive Testing and Evaluation, 33 (2018), 189-197. ]
      N. Tajima, N. Yusa, H. Hashizume
    [International Conference/Proceedings]
    • Resistance and critical current characteristics of demountable lap joint of various HTS tapes,
      [9th Workshop on Mechanical and Electromagnetic Properties of Composite Superconductors (MEM18), Andong, Korea, 2018/06/17-20.]
      S. Ito, R. Hayasaka, H. Hashizume
    • Reliability Analysis of Low Frequency Electromagnetic Method for Monitoring Wall Thinning in Ferromagnetic Pipes,
      [10th Far East NDT New Technology & Application Forum (FENDT 2018), Xiamen, China, 2018/07/06-08.]
      H. Song, N. Yusa, H. Hashizume
    • Estimaition of Local Wall Thinning in Carbon Steel Pipes based on Low Frequency Electromagnetic Monitoring Signals,
      [9th International Symposium on Symbiotic Nuclear Power Systems for 21st Century (ISSNP2018), Harbin, China, 2018/07/09-11.]
      H. Song, N. Yusa, H. Hashizume
    • A multi-parameter POD analysis of eddy current testing for the detection of corrosions,
      [The 23rd International Workshop on Electromagnetic Nondestructive Evaluation, Detroit, USA, 2018/09/09-13.]
      N. Yusa, H. Hashizume
    • Nondestructive testing using TE mode microwaves in the light of long-range pipe inspection,
      [The 23rd International Workshop on Electromagnetic Nondestructive Evaluation, Detroit, USA, 2018/09/09-13.]
      T. Katagiri, G, Chen, N. Yusa, H. Hashizume
    • Bridge-type mechanical lap joint of HTS STARS conductors using an integrated joint piece,
      [30th Symposium on Fusion Technology, Giardini Naxos, Italy, 2018/09/14-21.]
      S. Ito, H. Hashizume, N. Yanagi, H. Tamura
    • Heat transfer enhancement in MHD free-surface flow by controlling the electromagnetic force with fin structure,
      [30th Symposium on Fusion Technology, Giardini Naxos, Italy, 2018/09/14-21.]
      M. Kawamoto, K. Muraoka, S. Ito, H. Hashizume
    • Feasibility study for long-lived fission products transmutation using fusion reactors,
      [30th Symposium on Fusion Technology, Giardini Naxos, Italy, 2018/09/14-21.]
      T. Kitasaka, H. Shishido, N. Yusa, H. Hashizume
    • Comparison of the Attitudes of University Students Toward Nuclear Energy Among Three Asian Countries,
      [4th International Conference on Maintenance Science and Technology (ICMST2018), Sendai, Japan, 2018/10/23-26.]
      N. Yusa
    • Experimental Evaluation of Effects of a Bend on Microwave NDT,
      [4th International Conference on Maintenance Science and Technology (ICMST2018), Sendai, Japan, 2018/10/23-26.]
      G. Chen, T. Katagiri, N. Yusa, H. Hashizume
    • Reliability Analysis of Low Frequency Electromagnetic Method for Monitoring Loca Wall Thinning in Ferromagnetic PipeH,
      [4th International Conference on Maintenance Science and Technology (ICMST2018), Sendai, Japan, 2018/10/23-26.]
      H. Song, N. Yusa, H. Hashizume
    • Comparison of heat assisted lap joints of high-temperature superconducting tapes with inserted indium foils,
      [Applied Superconductivity Conference 2018 (ASC2018), Seattle, USA, 2018/10/28-11/02.]
      S. Ito, H. T. Fujii, R. Hayasaka, Y. S. Sato, H. Hashizume
    • Fundamental Evaluations of Applicability of LTS Quench Detectors to REBCO Pancake Coil,
      [Applied Superconductivity Conference 2018 (ASC2018), Seattle, USA, 2018/10/28-11/02.]
      S. Hasegawa, S. Ito, G. Nishijima, H. Hashizume
    • Recovery Characteristics of Porous-Stabilized REBCO Tape for Fault Current Limiters,
      [Applied Superconductivity Conference 2018 (ASC2018), Seattle, USA, 2018/10/28-11/02.]
      K. Yuki, S. Ito, H. Hashizume
    • Evaluation of temperature and magnetic field dependence of interface resistance in a REBCO tape for prediction of joint resistance,
      [Applied Superconductivity Conference 2018 (ASC2018), Seattle, USA, 2018/10/28-11/02.]
      R. Hayasaka, S. Ito, H. Hashizume
    • A Dynamic Model of the Sustainable Twin Nuclear Fuel Cycle by Introducing Fusion Transmutation Reactors,
      [The 29th International Symposium on Transport Phenomena (ISTP29), Honolulu, USA, 2018/10/30-11/02.]
      T. Kaneko, S. Ebara, H. Hashizume
    • Deformation characteristics of Indium Thin Films under Static and Cyclic Shear Stress used in Single Lap Joints of REBCO Coated Conductors,
      [23rd Topical Meeting on the Technology of Fusion Energy (23rd TOFE), Orlando, USA, 2018/11/11-15.]
      L.E. Aparicio, S. Ito, H. Hashizume
    • Realizable Scenario to Introduce Fusion Reactor with Providing Transmutation Functionality of Minor Actinides,
      [The 27th International Toki Conference on Plasma Fusion Research & The 13th Asia Pacific Plasma Theory Conference, Toki, Japan, 2018/11/19-22.]
      H. Hashizume, N. Yusa, H. Shishido
    • A Dynamic Model of the Sustainable Twin Nuclear Fuel Cycle by Introducing Fusion Transmutation Reactors,
      [The 27th International Toki Conference on Plasma Fusion Research & The 13th Asia Pacific Plasma Theory Conference, Toki, Japan, 2018/11/19-22.]
      H. Shishido, Y. Imanaka, N. Yusa, H. Hashizume
    [国内学会発表]
    • 低周波電磁場を用いた再処理施設二重缶減肉評価技術の開発研究,
      [日本非破壊検査協会東北支部第６回支部会・講演会，戦災復興記念館（宮城県仙台市），2018/04/20.]
      小野陽平，宋海成，遊佐訓孝，橋爪秀利
    • Evaluation of factors influencing modal conversion at bend in the light of pipe inspection using microwave NDT,
      [日本非破壊検査協会東北支部第６回支部会・講演会，戦災復興記念館（宮城県仙台市），2018/04/20.]
      陳冠任，片桐拓也，遊佐訓孝，橋爪秀利
    • 分割型高温超伝導マグネット接合部の接合抵抗予測手法の基礎研究,
      [日本保全学会 東北・北海道支部講演会，北海道大学（北海道札幌市），2018/05/11-12.]
      陳偉熙，伊藤悟，橋爪秀利
    • TEモードを用いたマイクロ波探傷法による管軸方向割れ位置の定量的評価,
      [日本保全学会 東北・北海道支部講演会，北海道大学（北海道札幌市），2018/05/11-12.]
      片桐拓也，陳冠任，遊佐訓孝，橋爪秀利
    • REBCO超伝導線材安定化材の多孔質化による超伝導復帰特性向上，
      [第18回日本伝熱学会東北支部学生発表会，東北大学片平キャンパス（宮城県仙台市），2018/05/19.]
      結城光平，伊藤悟，橋爪秀利
    • インジウム箔を用いた高温超伝導線材の超音波接合の基礎検討，
      [第96回（2018年度春季）低温工学・超電導学会，タワーホール船堀（東京都江戸川区），2018/05/28-30.]
      伊藤悟，藤井啓道，佐藤裕，橋爪秀利
    • 数値解析によるLTSクエンチ検出器のREBCOパンケーキコイルへの適用性評価，
      [第96回（2018年度春季）低温工学・超電導学会，タワーホール船堀（東京都江戸川区），2018/05/28-30.]
      泊瀬川晋，伊藤悟，橋爪秀利
    • 限流器応用のためのポーラス安定化材付REBCO線材の熱特性評価，
      [第96回（2018年度春季）低温工学・超電導学会，タワーホール船堀（東京都江戸川区），2018/05/28-30.]
      結城光平，伊藤悟，橋爪秀利
    • 分割型高温超伝導マグネットのための接合／冷却技術研究開発の現状，
      [第12回核融合エネルギー連合講演会，ピアザ淡海（滋賀県立県民交流センター）（滋賀県大津市），2018/06/28-29.]
      伊藤悟，橋爪秀利，柳長門，田村仁
    • REBCO線材の接合抵抗予測に向けた層間抵抗測定手法の開発，
      [第12回核融合エネルギー連合講演会，ピアザ淡海（滋賀県立県民交流センター）（滋賀県大津市），2018/06/28-29.]
      早坂遼一路，伊藤悟，橋爪秀利
    • 長寿命核分裂生成物核変換機能を有する核融合ブランケットの工学的成立性評価，
      [第12回核融合エネルギー連合講演会，ピアザ淡海（滋賀県立県民交流センター）（滋賀県大津市），2018/06/28-29.]
      北坂卓，宍戸博紀，遊佐訓孝，橋爪秀利
    • 部分絶縁フィン構造を用いた電磁力制御による液体金属蛇行流れの液体ダイバータへの適用性評価，
      [第12回核融合エネルギー連合講演会，ピアザ淡海（滋賀県立県民交流センター）（滋賀県大津市），2018/06/28-29.]
      川本誠，村岡健太，伊藤悟，橋爪秀利
    • Evaluation of General applicability of microwave NDT to pipes with a bend focusing on mode conversion，
      [日本保全学会第15回学術講演会，福岡国際会議場（福岡県福岡市），2018/07/10-12.]
      陳冠任，片桐拓也，遊佐訓孝，橋爪秀利
    • Probability of detection analysis of ultrasonic NDT applied to austenitic stainless steel welds，
      [日本保全学会第15回学術講演会，福岡国際会議場（福岡県福岡市），2018/07/10-12.]
      Siqi Meng, Haicheng Song, Noritaka Yusa, Tetsuya Uchimoto, Toshiyuki Takagi, Yuanjin Ling, Hidetoshi Hashizume
    • 大型据え置き電磁誘導コイルによる加熱ジャケット付二重缶検査技術評価のための有限要素法解析，
      [日本保全学会第15回学術講演会，福岡国際会議場（福岡県福岡市），2018/07/10-12.]
      小野陽平，宋海成，遊佐訓孝，橋爪秀利
    • 核融合中性子による核変換生成プルトニウムによる高速炉炉心特性評価，
      [日本原子力学会2018年秋の大会，岡山大学津島キャンパス（岡山県岡山市），2018/09/05-07.]
      今中佑太，宍戸博紀，遊佐訓孝，橋爪秀利
    • 高温超伝導線材のインジウム低温熱処理機械的接合，
      [2018年度秋季（第96回）低温工学・超電導学会，山形テルサ（山形県山形市），2018/11/19-21.]
      伊藤悟，早坂遼一路，橋爪秀利，加藤丈晴，横江大作
    • 高温超伝導ヘリカル装置計画に対する期待と要望，
      [第35回プラズマ・核融合学会年会，大阪大学吹田キャンパス（大阪府吹田市），2018/12/03-06.]
      橋爪秀利
    • 液体金属ブランケットの補強材付三面複層コーティング流路における金属層の製作と強度の評価，
      [日本原子力学会・東北支部会第42回研究交流会，東北大学片平さくらホール（宮城県仙台市），2018/12/11.]
      村岡健太，伊藤悟，橋爪秀利
    • MHD流動場評価に基づく補強材付三面複層コーティング流路の構造最適化，
      [日本原子力学会2019年春の年会，茨城大学水戸キャンパス（茨城県水戸市），2019/03/20-22.]
      村岡健太，伊藤悟，橋爪秀利

    2017

    [Journal]

    • Bending Characteristic of a Bridge-Type Mechanical Lap Joint of REBCO Tapes,
      [IEEE Transactions on Applied Superconductivity, 27(4) (2017), 4600105.]
      S. Ito, T. Nishio, H. Hashizume
    • Heating and Loading Process Improvement for Indium Inserted Mechanical Lap Joint of REBCO Tapes,
      [IEEE Transactions on Applied Superconductivity, 27(4) (2017), 4603305.]
      T. Nishio, S. Ito, H. Hashizume
    • ラオス国立大学工学部学生のエネルギー意識調査,
      [エネルギー環境教育研究 11 (2017), 59-64]
      遊佐訓孝
    • Numerical investigation of the ability of eddy current testing to size surface breaking cracks,
      [Nondestructive Testing and Evaluation 32 (2017), 50-58.]
      N. Yusa, H. Hashizume
    • Assessment of local conductivity distribution in stress corrosion crack region using direct current potential drop method,
      [Corrosion Science 123 (2017), 197-208]
      W. Cai, S. Xie, C. Jomdecha, X. Wang, C. Pei, Y. Li, Z. Chen, N. Yusa
    • Demonstration of the applicability of non-destructive microwave testing to the long-range inspection of a crack appearing at the inner surface of a pipe,
      [Materials Transactions 58 (2017), 692-696]
      K. Sasaki, T. Katagiri, N. Yusa, H. Hashizume
    • Thermal design investigation for a Flinabe blanket system,
      [Fusion Science and Technology 72 (2017), 382-388.]
      H. Shishido, N. Yusa, H. Hashizume, Y. Ishii, N. Ohtori
    • 配管側面入射マイクロ波による配管内壁面広域一括探傷技術の検討,
      [日本AEM学会誌 25 (2017), 266-272]
      佐々木幸太、遊佐訓孝、片桐拓也、橋爪秀利
    • ラオス国高校生の原子力に対する知識調査,
      [保全学 16 (2017), 82-88.]
      遊佐訓孝
    • Evaluation of Interface and Cohesion Shear Strength of Mechanical Lap-Joint Between HTS Coated Conductors Intended for Segmented HTS Magnet,
      [Fusion Science and Technology (Technical note), 72 (2017), 789-795.]
      L. E. Aparicio F., S. Ito, H. Hashizume
    • Development of remountable joints and heat removable techniques for high-temperature superconducting magnets,
      [Nuclear Fusion 58 (2017), 026014.]
      H. Hashizume, S. Ito, N. Yanagi, H. Tamura, A. Sagara
    • Design modification of structural components for the helical fusion reactor FFHR-d1 with challenging options,
      [Fusion Engineering and Design 124 (2017), 605-609.]
      H. Tamura, N. Yanagi, T. Goto, J. Miyazawa, T. Tanaka, A. Sagara, S. Ito, H. Hashizume
    • Current-carrying capability of the 100 kA-class HTS STARS conductor for the helical fusion reactor FFHR-d1,
      [Journal of Physics: Conference Series 871(1) (2017), 012099.]
      Y. Terazaki, N. Yanagi, S. Ito, S. Hamaguchi, H. Tamura, T. Mito, H. Hashizume, A. Sagara
    [International Conference / Proceedings]
    • Probability of detection model for the non-destructive inspection of steam generator tubes of PWRs,
      [Journal of Physics: Conference Series 860 (2017), 012032]
      N. Yusa
    • Recent situation of Japanese nuclear energy,
      [Sustainable Energy and Technology Asia 2017, Bangkok, Thailand, 2017/03/08-10.]
      N. Yusa
    • Development of electromagnetic nondestructive testing for inspecting mechanical lap joint of high-temperature superconducting tapes,
      [Far East NDT/E2017, Xi'an, China, 2017/06/22-24.]
      W. Chen, N. Yusa, S. Ito, H. Hashizume
    • Electro-mechanical measurements of mechanical lap joint of HTS STARS conductors,
      [25th International Conference on Magnet Technology (MT25), Amsterdam, Netherland, 2017/08/27-09/01.]
      S. Ito, T. Nishio, N. Yanagi, Y. Terazaki, N. Bagrets, M.J. Wolf, H. Tamura, K-P. Weiss, H. Hashziume, A. Sagara, W.H. Fietz
    • Numerical and Experimental Evaluations of the Quench Detection Performance of a NbTi/YBCO Hybrid Tape,
      [25th International Conference on Magnet Technology (MT25), Amsterdam, Netherland, 2017/08/27-09/01.]
      S. Hasegawa, S. Ito, H. Hashizume
    • Long-range inspection of a pipe with a bend using microwaves,
      [The 18th International Symposium on Applied Electromagnetics and Mechanics, Chamonix-Mont-Blanc, France, 2017/09/03-06.]
      S. Uoshita, K. Sasaki, T. Katagiri, N. Yusa, H. Hashizume
    • Proposal of a TEM to TE01 mode convertor for a microwave nondestructive inspection of axial flaws appearing on the inner surface of a pipe with an arbitrary diameter,
      [The 18th International Symposium on Applied Electromagnetics and Mechanics, Chamonix-Mont-Blanc, France, 2017/09/03-06.]
      T. Katagiri, K. Sasaki, N. Yusa, H. Hashizume
    • Long-range inspection of a crack on the inner surface of a pipe using microwaves,
      [22nd International Workshop on Electromagnetic Nondestructive Evaluation, Saclay, France, 2017/09/06-08.]
      K. Sasaki, T. Katagiri, N. Yusa, H. Hashizume
    • Applicability Evaluation of Microwaves for Detecting Corrosion under Insulation,
      [22nd International Workshop on Electromagnetic Nondestructive Evaluation, Saclay, France, 2017/09/06-08.]
      T. Katagiri, K. Sasaki, N. Yusa, H. Hashizume
    • Advanced High-temperature Superconducting Magnet for Fusion Reactors,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      S. Ito, H. Hashizume, N. Yanagi, T. Tamura
    • Improvement of flow evaluation and fabrication method of a three-surface-multi-layered channel with a reinforced metal layer,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      K. Muraoka, D. Isshiki, M. Kawamoto, S. Ito, H. Hashizume, T. Muroga
    • Investigation of Factors Causing Defects at Mechanical Lap joint Fabricated of High-temperature Superconducting Tapes,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      W. Chen, S. Ito, N. Yusa, H. Hashizume
    • Fluid stirring by multi-layered trenches for liquid metal divertor,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      M. Kawamoto, K. Muraoka, S. Ito, H. Hashizume
    • Thermofluid Characteristics of a Flow Channel with Finger-stacked Structure for the first wall Cooling of Flibe Blanket(2) Evaluation of Pressure Drop and Heat transfer Characteristics,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      M. Oishi, S. Yasunaga, S. Ebara, H. Hashizume
    • Applicability Evaluation of Directional Solidification Method for Purification of Molten Fluorides,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      H. Shishido, T. Onodera, K. Hitomi, N. Yusa, H. Hashizume
    • Comparison of Shear Strength and Failure Mechanisms of Lap Joint between REBCO Tapes Bonded by Different Joining Techniques,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      L. Aparicio, S. Ito, H. Hashizume
    • Evaluation of Boiling Heat Transfer Characteristic of a Self-Formed Swirling Flow downstream of Multi-Elbow Piping under One-Sided Heating Condition,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      H. Kawakami, S. Ebara, H. Hashizume
    • Thermofluid Characteristics of a Flow Channel with Finger-stacked Structure for the first wall Cooling of Flibe Blanket (1) Optimization of Channel Structure by Flow Visualization Experiment,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      S. Yasunaga, S. Ebara, H. Hashizume, A. Sagara
    • Neutronics and Thermal Evaluation of Transmuting Minor Actinides in a Magnetic Confinement Fusion System,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      Y. Shibayama, Y. Furudate, H. Shishido, N. Yusa, H. Hashizume
    • Proposal of a double-strata fuel cycle utilizing fusion reactors to transmute minor actinides,
      [13th International Symposium on Fusion Nuclear Technology, Kyoto, Japan, 2017/09/25-29.]
      Y. Furudate, H. Shishido, N. Yusa, H. Hashizume
    • Applicability evaluation of quench detectable hybrid REBCO tape to HTS magnet for fusion reactors,
      [CHATS on Applied Superconductivity 2017, Sendai, Japan, 2017/12/10-12.]
      S. Ito, S. Hasegawa, N. Yanagi, H. Hashizume
    • Sample preparation for electro-mechanical measurements of mechanical lap joint of 10-kA-class prototype HTS STARS conductors,
      [4th HTS4Fusion Conductor Workshop, Nagoya, Japan, 2018/3/21-23.]
      S. Ito, T. Nishio, R. Hayasaka, L. Aparicio, N. Yanagi, Y. Terazaki, N. Bagrets, M. J. Wolf, H. Tamura, K.-P. Weiss, H. Hashziume, A. Sagara, Reinhard Heller, W. H. Fietz
    • Electro-Mechanical Behavior of Mechanical Lap Joint Between REBCO Tapes under Cyclic Shear Stress,
      [4th HTS4Fusion Conductor Workshop, Nagoya, Japan, 2018/3/21-23.]
      L. Aparicio, S. Ito, H. Hashziume
    • Applicability Evaluations of a Quench Detectable Superconducting Sensor to HTS coils,
      [4th HTS4Fusion Conductor Workshop, Nagoya, Japan, 2018/3/21-23.]
      S. Hasegawa, S. Ito, H. Hashziume
    [国内学会発表]
    • マイクロ波を用いた配管内壁面開口割れの検出と評価,
      [日本非破壊検査協会東北支部第５回支部会・講演会，ＰＡＲＭ ＣＩＴＹ１３１（宮城県仙台市），2017/04/21.]
      片桐拓也，佐々木幸太，遊佐訓孝，橋爪秀利
    • 電位プローブ配置の検討による強磁場環境下における液体金属流れの流速分布測定の高精度化，
      [第17回日本伝熱学会東北支部学生発表会，東北大学片平キャンパス（宮城県仙台市），2017/05/13.]
      村岡健太，一色大地，川本誠，伊藤悟，橋爪秀利，室賀健夫
    • 核融合炉液体ダイバータ用電磁力制御トレンチの提案と初期検討，
      [第17回日本伝熱学会東北支部学生発表会，東北大学片平キャンパス（宮城県仙台市），2017/05/13.]
      川本誠，村岡健太，伊藤悟，橋爪秀利
    • 分割型高温超伝導マグネットの機械的接合部への熱処理の適用検討，
      [第94回（2017年度春季）低温工学・超電導学会，タワーホール船堀（東京都江戸川区），2017/05/22-24.]
      伊藤悟，西尾樹，橋爪秀利
    • NbTi/YBCOハイブリッド線材のクエンチ検出性能向上の研究，
      [第94回（2017年度春季）低温工学・超電導学会，タワーホール船堀（東京都江戸川区），2017/05/22-24.]
      泊瀬川晋，伊藤悟，橋爪秀利
    • 二重管内の減肉検出のためのTEMモード発振によるマイクロ波探傷法の適用性評価，
      [表面NDTワークショップ 若手研究発表，日本非破壊検査協会亀戸センター（東京都江東区），2017/06/5.]
      片桐拓也，佐々木幸太，遊佐訓孝，橋爪秀利
    • 電磁力制御トレンチにおける液体金属流動場の磁場依存性評価，
      [第22回 動力・エネルギー技術シンポジウム，豊橋商工会議所（愛知県豊橋市），2017/06/14-15.]
      川本誠，村岡健太，伊藤悟，橋爪秀利
    • 低周波渦電流探傷法による磁性配管減肉検査における影響因子評価，
      [第14回 日本非破壊検査協会 保守検査部門ミニシンポジウム，東京都立産業技術研究センター（東京都江東区），2017/08/29.]
      宋海成，田島直樹，遊佐訓孝，橋爪秀利
    • 金属多孔質体極低温冷却システムの多孔質体材料・サブクール度を考慮した伝熱相関式の修正，
      [2017 年度秋季（第95回）低温工学・超電導学会，高知市文化プラザかるぽーと（高知県高知市），2017/11/21-23.]
      針生明日可，佐々木駿介，伊藤悟，橋爪秀利
    • 高磁場環境へのYBCO/LTSd線材の適用性の評価，
      [日本原子力学会東北支部　第41回研究交流会，東北大学片平キャンパス（宮城県仙台市），2017/12/8.]
      泊瀬川晋，伊藤悟，橋爪秀利
    • REBCO線材の機械的接合における層間抵抗の温度磁場依存性評価，
      [日本原子力学会東北支部　第41回研究交流会，東北大学片平キャンパス（宮城県仙台市），2017/12/8.]
      早坂遼一路，伊藤悟，橋爪秀利
    • 放射性廃棄物の核変換処理を目的とした核融合炉ブランケットの核的性能および伝熱性能に対する冷却材の影響評価 ，
      [日本原子力学会2018年春の年会，大阪大学吹田キャンパス（大阪府吹田市），2018/3/26-28.]
      今中佑太，宍戸博紀，遊佐訓孝，橋爪秀利

    2016

    [Journal]

    • Characteristics of flow field and pressure fluctuation in complex turbulent flow in the thrid elbow of a triple elbow piping with small curvature radius in three-dimensional layout,
      [International Journal of Hydrogen Energy, 41(17) (2016), 7139-7145.]
      S. Ebara, H. Takamura, H. Hashizume, H. Yamano
    • 革新的核融合炉実現に向けた分割型高温超伝導マグネットの研究開発
      ‐高温超伝導導体の着脱可能な接合法の開発状況‐
      [プラズマ・核融合学会誌, 92(8) (2016), 623-634.]
      伊藤悟，橋爪秀利，遊佐訓孝，柳長門，田村仁，相良明男
    • Magnet design with 100-kA HTS STARS conductors for the helical fusion reactor,
      [Cryogenics, 80(2) (2016), 243-249.]
      N. Yanagi, Y. Terazaki, S. Ito, H. Tamura, S. Hamaguchi, T. Mito, H. Hashizume, A. Sagara
    • Design Status of the Structural Components of the Helical Fusion Reactor FFHR-d1,
      [Plasma and Fusion Research, 11 (2016), 2405061.]
      H. Tamura, T. Tanaka, T. Goto, N. Yanagi, J. Miyazawa, S. Masuzaki, R. Sakamoto, A. Sagara, S. Ito, H. Hashizume, the FFHR Design Group
    • Evaluation of Shear Strength in Soldered and Mechanical Lap joints of High-Temperature Superconducting tapes Intended for a Remountable Magnet,
      [Plasma and Fusion Research, 11 (2016), 2405065.]
      L. Aparicio, S. Ito, H. Hashizume
    • Structure and magnetic field dependences of joint resistance in a mechanical joint of REBCO tapes,
      [IEEE Transactions on Applied Superconductivity, 26(4) (2016), 6601505.]
      S. Ito, Y. Seino, T. Nishio, H. Oguro, H. Hashizume
    • Reducing joint resistance by heat treatment during fabrication of a mechanical joint of high-temperature superconducting conductors,
      [IEEE Transactions on Applied Superconductivity, 26(4) (2016), 4800505.]
      T. Nishio, S. Ito, N. Yusa, H. Hashizume
    • Multiscale Stress Analysis and 3D Fitting Structure of Superconducting Coils for the Helical Fusion Reactor,
      [IEEE Transactions on Applied Superconductivity, 26(3) (2016), 4202405.]
      H. Tamura, N. Yanagi, K. Takahata, A. Sagara, S. Ito, H. Hashizume
    • Mechanical and Electrical Characteristics of a Bridge-type Mechanical Lap Joint of HTS STARS Conductors,
      [IEEE Transactions on Applied Superconductivity, 26(2) (2016), 4201510.]
      S. Ito, N. Yusa, N. Yanagi, H. Tamura, A. Sagara, H. Hashizume
    • Evaluation of Probability of Detection (POD) studies with multiple explanatory variables,
      [Journal of Nuclear Science and Technology 53(4) (2016), 574-579.]
      N. Yusa J. Knopp
    • Demonstration of low-frequency vibration tests to evaluate bolt loosening,
      [International Journal of Applied Electromagnetics and Mechanics, 52(1-2) (2016), 89-94.]
      N. Yusa, S. Sawada
    • Demonstration of probability of detection taking consideration of both the length and the depth of a flaw explicitly,
      [NDT&E International 81(2016), 1-8.]
      N. Yusa, W. Chen, H. Hashizume
    • Fabrication of imitative cracks by 3D printing for electromagnetic nondestructive testing and evaluations,
      [Case Studies in Nondestructive Testing and Evaluation 5 (2016), 9-14.]
      N. Yusa, W. Chen, J. Wang, H. Hashizume
    [International Conference / Proceedings ]
    • Modeling of TE mode transducer for nondestructive testing of defects inside a metal pipe using microwave,
      [19th World Conference on Non-destructive Testing (WCNDT2016), Munich, Germany, 2016/06/13-17.]
      K. Sasaki, T. Katagiri, N. Yusa, H. Hashizume
    • Detecting bolt loosening on the basis of vibration signals as low as a few hertz,
      [19th World Conference on Non-destructive Testing (WCNDT2016), Munich, Germany, 2016/06/13-17.]
      N. Yusa, S. Sawada
    • Probability of detection model for the non-destructive inspection of steam generator tubes of PWRs,
      [International Nuclear Science and Technology Conference (INST2016), Bangkok, Thailand, 2016/08/04-06.]
      N. Yusa
    • Thermal Design Investigation for a Flinabe Blanket System,
      [The 22nd Topical Meeting on the Technology of Fusion Engineering, Philadelphia, USA, 2016/08/21-25.]
      H. Shishido, N.. Yusa, H. Hashizume, Y. Ishii, N. Ohtori
    • Scenario Construction of MA Transmutation in Japan Using Fusion Reactor,
      [The 22nd Topical Meeting on the Technology of Fusion Engineering, Philadelphia, USA, 2016/08/21-25.]
      Y. Furudate, H. Shishido, N. Yusa, H. Hashizume
    • Evaluation of Interface and Cohesion Shear Strength of Mechanical Lap-Joint between HTS Coated Conductors Intended for Segmented HTS Magnet,
      [The 22nd Topical Meeting on the Technology of Fusion Engineering, Philadelphia, USA, 2016/08/21-25.]
      L. Aparicio, S. Ito, H. Hashizume
    • Bending Characteristic of a Bridge-type Mechanical Lap Joint of REBCO Tapes,
      [Applied Superconductivity Conference 2016, Denver, USA, 2016/9/4-9.]
      S. Ito, T. Nishio, H. Hashizume
    • Improvement heating and loading process for indium inserted mechanical lap joint of REBCO tapes,
      [Applied Superconductivity Conference 2016, Denver, USA, 2016/9/4-9.]
      T. Nishio, S. Ito, H. Hashizume
    • Evaluating the Detectability of Direct Current Potential Drop Method with the Aid of Probability of Detection,
      [7th International Conference on Electromagnetic Field Problems and Applications (ICEF2016), Xi'an, China, 2016/09/18-20.]
      N. Yusa, H. Hashizume
    • The application of 3D printing technology to fabricate an imitative crack for electromagnetic NDT&E studies,
      [21st International Workshop on Electromagnetic Nondestructive Evaluation, Lisbon, Portugal, 2016/09/25-28.]
      N. Yusa, W. Chen, H. Hashizume,
    • Low frequency eddy current testing to measure thickness of double layer plates made of nonmagnetic steel,
      [21st International Workshop on Electromagnetic Nondestructive Evaluation, Lisbon, Portugal, 2016/09/25-28.]
      N. Tajima, N. Yusa, H. Hashizume,
    • Non-destructive testing using microwave in te mode for detecting axial cracks in a metal pipe,
      [21st International Workshop on Electromagnetic Nondestructive Evaluation, Lisbon, Portugal, 2016/09/25-28.]
      T. Katagiri, K. Sasaki, N. Yusa, H. Hashizume,
    • Development of Remountable Joints and Heat Removable Techniques for High-temperature Superconducting Magnets,
      [26th IAEA Fusion Energy Conference, Kyoto, Japan, 2016/10/17-22.]
      H. Hashizume, S. Ito, N. Yanagi, H. Tamura, A. Sagara
    • Flow Field Investigation in a Cooling Channel with Finger-Stacked Structure Using PIV Measurement,
      [11th International Symposium on Advanced Science and Technology in Experimental Mechanics, Ho Chi Minh, Vietnam, 2016/11/1-4.]
      S. Yasunaga, S. Ebara, H. Hashizume
    • Heat Transfer Characteristic of Sphere-packed Rectangular Channel for High Prandtl Number Fluid Under One-sided Heating Condition,
      [4th International Forum on Heat Transfer (IFHT 2016), Sendai, Japan, 2016/11/2-4.]
      D. Smakulska, S. Yasunaga, S. Ebara, H. Hashizume
    • Verification of the feasibility of LTS/HTS Hybrid Superconducting Tape,
      [1st Asian ICMC and CSSJ 50th Anniversary Conference, Kanazawa, Japan, 2016/11/7-10.]
      S. Hasegawa, S. Ito, H. Hashizume
    [国内学会発表]
    • マイクロ波を用いた配管内軸方向割れ探傷におけるTEモード発振のための入射部構造の検討，
      [日本非破壊検査協会 東北支部 第4回 支部会・講演会，エル・パーク仙台（宮城県仙台市），2016/04/22.]
      片桐拓也，佐々木幸太，遊佐訓孝，橋爪秀利
    • 核融合炉ダイバータ冷却に向けた2段エルボ下流自己形成流動場の沸騰伝熱特性の基礎研究，
      [第16回日本伝熱学会東北支部学生発表会，東北大学片平キャンパス（宮城県仙台市），2016/05/07.]
      川上紘史，江原真司，橋爪秀利
    • 分割型高温超電導マグネットの開発の現状，
      [第28回「電磁力関連のダイナミクス」シンポジウム，慶応大学日吉キャンパス（神奈川県横浜市），2016/05/18-05/20.]
      橋爪秀利，伊藤悟
    • 配管内軸方向き裂探傷のためのTEモード発振によるマイクロ波探傷法の高度化，
      [第28回「電磁力関連のダイナミクス」シンポジウム，慶応大学日吉キャンパス（神奈川県横浜市），2016/05/18-05/20.]
      片桐拓也，佐々木幸太，遊佐訓孝，橋爪秀利
    • クエンチ検出機能を備えたLTS/HTSハイブリッドテープ線材の提案，
      [第93回（2016年度春季・学会50周年記念）低温工学・超電導学会，タワーホール船堀（東京都江戸川区），2016/05/30-06/01.]
      泊瀬川晋，伊藤悟，橋爪秀利
    • 分割型高温超伝導マグネット接合部製作技術の開発進展，
      [第11回核融合エネルギー連合講演会，九州大学伊都キャンパス（福岡県福岡市），2016/07/14-15.]
      伊藤悟，橋爪秀利，柳長門，田村仁，相良明男
    • ヘリカル型核融合炉FFHR-d1への適用をめざした100 kA級高温超伝導STARS導体の安定性解析，
      [第11回核融合エネルギー連合講演会，九州大学伊都キャンパス（福岡県福岡市），2016/07/14-15.]
      寺崎義朗，柳長門，伊藤悟，濱口真司，田村仁，三戸利行，橋爪秀利，相良明男
    • 14 MeV中性子の有効利用による核融合炉の導入シナリオ，
      [第11回核融合エネルギー連合講演会，九州大学伊都キャンパス（福岡県福岡市），2016/07/14-15.]
      橋爪秀利，遊佐訓孝，宍戸博紀，古館佑樹
    • 可視化実験による碁盤目配列Finger-Stacked Structure流路内部流動の評価，
      [第11回核融合エネルギー連合講演会，九州大学伊都キャンパス（福岡県福岡市），2016/07/14-15.]
      安永昌平，江原真司，橋爪秀利
    • Heat transfer performance in Sphere-Packed Rectangular Channel wtih one-side heating for the first wall cooling of Flibe Blanket，
      [第11回核融合エネルギー連合講演会，九州大学伊都キャンパス（福岡県福岡市），2016/07/14-15.]
      Dorota Smakulska，江原真司，橋爪秀利
    • 磁性配管減肉モニタリングのための低周波漏洩磁束探傷法の開発，
      [日本保全学会 第13回学術講演会，かながわ労働プラザ（神奈川県横浜市），2016/07/25-27.]
      田島直樹，遊佐訓孝，橋爪秀利
    • 疑似2色X線CTを用いた高・ｷ超電導線材の機械的ラップジョイントの接合不良部の解析，
      [日本非破壊検査協会秋季講演大会，ハーネル仙台（宮城県仙台市），2016/10/06-07.]
      陳偉熙，遊佐訓孝，伊藤悟，橋爪秀利
    • 二重管内の減肉検出のためのTEMモード発振によるマイクロ波探傷法の適用性評価，
      [日本非破壊検査協会秋季講演大会，ハーネル仙台（宮城県仙台市），2016/10/06-07.]
      片桐拓也，佐々木幸太，遊佐訓孝，橋爪秀利
    • 分割型高温超伝導マグネットの機械的接合の研究進展（１）接合部熱処理条件改善による接合抵抗低減，
      [プラズマ・核融合学会　第33回年会，東北大学青葉山キャンパス（宮城県仙台市），2016/11/29-12/02.]
      西尾樹，伊藤悟，橋爪秀利
    • 核融合炉開発と先進超伝導マグネット設計，
      [電子情報通信学会東北支部講演会，八戸工業大学（青森県八戸市），2016/11/18.]
      伊藤悟
    • Research progress in mechanical joint technique for remountable high-temperature superconducting magnet (2) Improvement on interfacial shear strength of mechanical lap joint，
      [プラズマ・核融合学会　第33回年会，東北大学青葉山キャンパス（宮城県仙台市），2016/11/29-12/02.]
      アパリシオルイス，伊藤悟，橋爪秀利
    • REBCO線材プロトン照射試験による特性変化評価，
      [日本原子力学会東北支部　第40回研究交流会，東北大学片平キャンパス（宮城県仙台市），2016/12/12.]
      望月善文，伊藤悟，橋爪秀利
    • 可視化実験による Finger-Stacked Structure流路内流れの内部構造依存評価，
      [日本原子力学会2017年春の年会，東海大学湘南キャンパス（神奈川県平塚市），2017/03/27-29.]
      安永昌平，江原真司，橋爪秀利，相良明男
    • 核融合炉の導入による放射性廃棄物低減シナリオの提案，
      [日本原子力学会2017年春の年会，東海大学湘南キャンパス（神奈川県平塚市），2017/03/27-29.]
      古館佑樹，宍戸博紀，遊佐訓孝，橋爪秀利
    • Flinak溶融塩精製のための一方向凝固法適用性評価，
      [日本原子力学会2017年春の年会，東海大学湘南キャンパス（神奈川県平塚市），2017/03/27-29.]
      宍戸博紀，小野寺敏幸，人見啓太朗，遊佐訓孝，橋爪秀利
    • 片面加熱時の多段エルボ下流旋回流自己形成流動場のサブクール沸騰伝熱特性評価，
      [日本原子力学会2017年春の年会，東海大学湘南キャンパス（神奈川県平塚市），2017/03/27-29.]
      川上紘史，江原真司，橋爪秀利

    2015

    [Journal]

    • Fundamental Investigation on Tensile Characteristics of a Mechanical Lap Joint of REBCO Tapes,
      [IEEE Transactions on Applied Superconductivity, 25(3) (2015), 4201205.]
      S. Ito, H. Oguro, H. Tamura, N. Yanagi, H. Hashizume
    • Investigation of Influences of Film Resistance and Magnetic Field on Contact Resistance in a Mechanical Lap Joint of a GdBCO tapes,
      [IEEE Transactions on Applied Superconductivity, 25(3) (2015), 6603405.]
      Y. Seino, S. Ito, H. Oguro, H. Hashizume
    • Measurement and Analysis of Critical Current of 100-kA Class Simply-Stacked HTS Conductors,
      [IEEE Transactions on Applied Superconductivity, 25(3) (2015), 4602905.]
      Y. Terazaki, N. Yanagi, S. Ito, Y. Seino, S. Hamaguchi, H. Tamura, T. Mito, H. Hashizume, A. Sagara
    • Optimized microwave excitation probe for general application in NDT of wall thinning in metal pipes,
      [NDT&E International 70 (2015), 53-59.]
      K. Sasaki, L. Liu, N. Yusa, H. Hashizume
    • 大型高温超伝導マグネットの開発の現状と展望
      ‐高温超伝導導体の分割製作と接合技術による大型マグネットの開発‐
      [プラズマ・核融合学会誌, 91(2) (2015), 87-96.]
      橋爪秀利，伊藤悟，柳長門，寺崎義朗，田村仁，江原真司，遊佐訓孝，相良明男
    • Design and development of high-temperature superconducting magnet system with joint-winding for the helical fusion reactor,
      [Nuclear Fusion, 55 (2015), 053021(7pp).]
      N. Yanagi, S. Ito, Y. Terazaki, Y. Seino, S. Hamaguchi, H. Tamura, J. Miyazawa, T. Mito, H. Hashizume, A. Sagara
    • Novel divertor design to mitigate neutron irradiation in the helical reactor FFHR-d1,
      [Fusion Engineering and Design, 98-99 (2015), 1629?1633.]
      H. Tamura, T. Tanaka, T. Goto, J. Miyazawa, S. Masuzaki, T. Watanabe, N. Yanagi, A. Sagara, S. Ito, H. Hashizume
    • Steady and Transient Thermal Analyses on a Segmented High-Temperature Superconducting Magnet With Porous Media-Inserted Cryogenic Cooling,
      [Fusion Science and Technology, 68(2) (2015), 428-432.]
      S. Ito, H. Hashizume
    • Evaluation of physical properties of the molten salt mixture flinabe for a fusion blanket system using molecular dynamics simulation,
      [Fusion Science and Technology 68(2015), 669-673.]
      H. Shishido, N. Yusa, H. Hashizume, Y. Ishii, N. Ohtori
    • Overview of the Fusion Engineering in Japan,
      [Fusion Science and Technology, 68(2) (2015), 201-210.]
      H. Hashizume, T. Nishitani, S. Konishi, Y. Ueda, S. Fukada, A. Sagara
    [International Conference / Proceedings ]
    • Analysis on Propagation Losses inside a Metal Pipe in Nondestructive Testing Using Microwave for Wall Thinning,
      [[ XVIII International Symposium on Theoretical Electrical Engineering (ISTET'15), Kolobrzeg, Poland, 2015/06/07-10.]]
      K. Sasaki, N. Yusa, H. Hashizume
    • Mechanical and electrical characteristics of a bridge-type mechanical lap joint of HTS stars conductors based on a joint test and x-ray inspection,
      [HTS4Fusion Conductor Workshop, Pieve S, Stefano, Italy, 2015/09/11-12.]
      Satoshi Ito, Noritaka Yusa, Nagato Yanagi, Hiroshi Tamura, Akio Sagara, Hidetoshi Hashizume
    • Demonstration of low-frequency vibration tests to evaluate bolt loosening,
      [The 17th International Symposium on Applied Electromagnetics and Mechanics, Kobe, Japan, 2015/09/15-18.]
      N. Yusa, S. Sawada
    • Applicability of evaluation of non-destructive testing using microwave for a crack on the inner surface of metal tubes,
      [The 17th International Symposium on Applied Electromagnetics and Mechanics, Kobe, Japan, 2015/09/15-18.]
      K. Sasaki, N. Yusa, H. Hashizume
    • Evaluation of neutronic performance of Flibe+LiI molten salt blanket system for MA transmutation,
      [The 17th International Symposium on Applied Electromagnetics and Mechanics, Kobe, Japan, 2015/09/15-18.]
      Y. Furudate, H. Shishido, N. Yusa, H. Hashizume
    • Designing of a fusion blanket system using molten salt flinabe for transmutation of minor actinides,
      [GLOBAL2015, Paris, France 2015/09/20-24.],
      H. Shishido, Y. Furudate, N. Yusa, H. Hashizume
    • Development of probability of detection taking consideration of multiple inspection data,
      [The 20th International Workshop on Electromagnetic Nondestructive Evaluation, Sendai, Japan, 2015/09/21-23.]
      N. Yusa, J. Knopp
    • Simulated evaluation of eddy current thermalgraphy for inspection of joint of divertor,
      [The 20th International Workshop on Electromagnetic Nondestructive Evaluation, Sendai, Japan, 2015/09/21-23.]
      J. Wang, N. Yusa, H. Hashizume
    • Low frequency magnetic field measurement to monitor pipe wall thinning using mi sensor arrays,
      [The 20th International Workshop on Electromagnetic Nondestructive Evaluation, Sendai, Japan, 2015/09/21-23.]
      N. Tajima, K. Sasaki, N. Yusa, H. Hashizume, T. Uchimoto, T. Takagi, K. Tanji
    • Development of the sided-incidence method in nondestructive testing using microwave for wall thinning inside a metal pipe,
      [The 20th International Workshop on Electromagnetic Nondestructive Evaluation, Sendai, Japan, 2015/09/21-23.]
      K. Sasaki, N. Yusa, H. Hashizume
    • Impedance measurement for predicting joint resistance of a mechanical lap joint in a high-temperature superconductor,
      [The 20th International Workshop on Electromagnetic Nondestructive Evaluation, Sendai, Japan, 2015/09/21-23.]
      W. Chen, S. Ito, N. Yusa, H. Hashizume
    • Evaluation of Influence of the Inlet Swirling Flow on the Flow Field in a Triple Elbow System,
      [17th International Conference on Emerging Nuclear Energy Systems (ICENES2015), Istanbul, Turkey, 2015/10/04-08.]
      J. Mizutani, S. Ebara, H. Hashizume
    • Characteristics of Flow Field and Pressure Fluctuation in Complex Turbulent Flow in the Third Elbow of a Triple Elbow Piping with Small Curvature Radius in Three-dimensional Layout,
      [17th International Conference on Emerging Nuclear Energy Systems (ICENES2015), Istanbul, Turkey, 2015/10/04-08.]
      S. Ebara, H. Takamura, H. Hashizume, H. Yamano
    • Proposal of a prediction method for forced convection and nucleate boiling heat transfer characteristics in a cryogenic cooling system using the metal-particle sintered porous medium,
      [International Workshop on Cooling-system for HTS Applications 2015 (IWC-HTS 2015), Matsue, Japan, 2015/10/14-16.]
      S. Sasaki, S. Ito, H. Hashizume
    • Structure and magnetic field dependences of joint resistance in a mechanical joint of REBCO tapes,
      [International Conference on Magnet Technology 24 (MT-24), Seoul, Korea, 2015/10/18-23.]
      S. Ito, Y. Seino, T. Nishio, H. Oguro, H. Hashizume
    • Improving the joint resistance by heat treatment during fabrication of mechanical joint of high-temperature superconducting conductors,
      [International Conference on Magnet Technology 24 (MT-24), Seoul, Korea, 2015/10/18-23.]
      T. Nishio, S. Ito, N. Yusa, H. Hashizume
    • Discussion on the effect of NaF on physical properties of Flinabe in comparison to Flibe from molecular dynamics simulations,
      [25th International TOKI Conference (ITC-24), Toki, Japan, 2015/11/03-06.]
      H. Shishido, N. Yusa, H. Hashizume, Y. Ishii, N. Ohtori
    • Performancs evaluation of a three-surface-multi-layered channel with a reinforced metal layer,
      [25th International TOKI Conference (ITC-24), Toki, Japan, 2015/11/03-06.]
      D. Isshiki, S. Ito, T. Muroga, H. Hashizume
    • Evaluation of shear strength in soldered and mechanical lap joints of high-temperature superconducting tapes intended for a remountable magnet,
      [25th International TOKI Conference (ITC-24), Toki, Japan, 2015/11/03-06.]
      L. Aparicio, S. Ito, H. Hashizume
    [国内学会発表]
    • 配管減肉に対するマイクロ波探傷法における減肉検出可能性の軸方向位置依存性評価，
      [日本非破壊検査協会東北支部 講演会・支部会・30周年記念式典，仙台サンプラザ（宮城県仙台市），2015/04/17.]
      佐々木幸太，遊佐訓孝，橋爪秀利
    • 配管減肉モニタリングへの極低周波渦電流探傷法の適用性，
      [日本非破壊検査協会東北支部 講演会・支部会・30周年記念式典，仙台サンプラザ（宮城県仙台市），2015/04/17.]
      田島直樹，遊佐訓孝，橋爪秀利
    • ブロンズ粒子多孔質体と液体窒素を用いた冷却システムの熱伝達性能の粒子径依存性評価，
      [第15回日本伝熱学会東北支部学生発表会，東北大学片平キャンパス（宮城県仙台市），2015/05/09.]
      佐々木駿介，伊藤悟，橋爪秀利
    • 可視化実験によるFinger-Stacked Structure 流路内部流動の評価，
      [第15回日本伝熱学会東北支部学生発表会，東北大学片平キャンパス（宮城県仙台市），2015/05/09.]
      安永昌平，江原真司，橋爪秀利
    • 分割型高温超伝導マグネットの接合性能予測手法と接合部製作法の改善，
      [第91回（2015年度春季）低温工学・超電導学会，産業技術総合研究所つくばセンター（茨城県つくば市），2015/05/27-29.]
      伊藤悟，清野祐太郎，西尾樹，陳偉熙，遊佐訓孝，橋爪秀利，小黒英俊
    • 100 kA級高温超伝導STARS導体を用いたヘリカル型核融合炉FFHR-d1マグネット設計の進展，
      [第91回（2015年度春季）低温工学・超電導学会，産業技術総合研究所つくばセンター（茨城県つくば市），2015/05/27-29.]
      柳長門，伊藤悟，寺ｱ義朗，田村仁，濱口真司，三戸利行，橋爪秀利，相良明男
    • ヘリカル型核融合炉への適用をめざした100 kA級高温超伝導STARS導体の臨界電流解析，
      [第91回（2015年度春季）低温工学・超電導学会，産業技術総合研究所つくばセンター（茨城県つくば市），2015/05/27-29.]
      寺ｱ義朗，柳長門，伊藤悟，濱口真司，田村仁，三戸利行，橋爪秀利，相良明男
    • 液体窒素を用いた除熱システムにおける熱伝達率の金属多孔質体粒子径依存性の評価，
      [第20回 動力・エネルギー技術シンポジウム，東北大学青葉山キャンパス（宮城県仙台市），2015/06/18-19.]
      佐々木駿介，伊藤悟，橋爪秀利
    • エルボ下流自己形成流動場のダイバータ冷却への応用に関する基礎研究，
      [第20回 動力・エネルギー技術シンポジウム，東北大学青葉山キャンパス（宮城県仙台市），2015/06/18-19.]
      古舘翔一，服部宗仁，江原真司，橋爪秀利
    • 三段エルボ配管における入口旋回流の流れ場への影響評価，
      [第20回 動力・エネルギー技術シンポジウム，東北大学青葉山キャンパス（宮城県仙台市），2015/06/18-19.]
      水谷淳，江原真司，橋爪秀利
    • 極低周波渦電流探傷法の配管減肉モニタリングへの適用性評価，
      [第20回 動力・エネルギー技術シンポジウム，東北大学青葉山キャンパス（宮城県仙台市），2015/06/18-19.]
      田島直樹，佐々木幸太，遊佐訓孝，橋爪秀利
    • Finger-Stacked Structure流路における内部流動のPIV詳細計測，
      [第20回 動力・エネルギー技術シンポジウム，東北大学青葉山キャンパス（宮城県仙台市），2015/06/18-19.]
      安永昌平，江原真司，橋爪秀利
    • Evaluation and Comparison of Shear Strength of Soldered and Mechanical lap joint of HTS Coated Conductors Intended for Remountable Superconducting Magnet，
      [日本原子力学会2015秋の大会，静岡大学静岡キャンパス（静岡県静岡市），2015/09/09-11.]
      アパリシオルイス，伊藤悟，橋爪秀利
    • 革新的核融合炉実現に向けた分割型高温超伝導マグネットの研究開発 〜高温超伝導導体の着脱可能な接合法の開発状況〜，
      [プラズマ核融合学会第32回年会，名古屋大学東山キャンパス（愛知県名古屋市），2015/11/24-27.]
      伊藤悟，橋爪秀利，遊佐訓孝，柳長門，田村仁，相良明男
    • 分割型高温超伝導マグネッ トの接合性能の分析／改善法の研究進展 (1) 接合抵抗の磁場方向依存性評価，
      [第92回（2015年度秋季）低温工学・超電・ｱ学会，姫路商工会議所（兵庫県姫路市），2015/12/02-04.]
      伊藤悟，清野祐太郎，西尾樹，小黒英俊，橋爪 秀利
    • 分割型高温超伝導マグネッ トの接合性能の分析／改善法の研究進展 (2) 接合部製作時の温度制御による接合抵・Rの低減，
      [第92回（2015年度秋季）低温工学・超電導学会，姫路商工会議所（兵庫県姫路市），2015/12/02-04.]
      西尾樹，伊藤悟，橋爪秀利
    • 分割型高温超伝導マグネットの接合性能の分析／改善法の研究進展 (3) 室温における接合部の電磁非破壊検査の基礎研究，
      [第92回（2015年度秋季）低温工学・超電導学会，姫路商工会議所（兵庫県姫路市），2015/12/02-04.]
      陳偉熙，伊藤悟，遊佐訓孝，橋爪秀利
    • 100 kA 級高温超伝導 STARS 導体を用いたヘリカル型核融合炉 FFHR-d1 マグネットの設計，
      [第92回（2015年度秋季）低温工学・超電導学会，姫路商工会議所（兵庫県姫路市），2015/12/02-04.]
      柳長門，伊藤悟，寺ｱ義朗，濱口真司，田村仁，三戸利行，橋爪秀利，相良明男
    • ヘリカル型核融合炉への適用をめざした100 kA級高温超伝導STARS導体の通電特性，
      [第92回（2015年度秋季）低温工学・超電導学会，姫路商工会議所（兵庫県姫路市），2015/12/02-04.]
      寺ｱ義朗，柳長門，伊藤悟，濱口真司，田村仁，三戸利行，橋爪秀利，相良明男
    • ヘリカル型核融合炉のマルチスケール構造解析と3Dプリンタを用いた組立検討，
      [第92回（2015年度秋季）低温工学・超電導学会，姫路商工会議所（兵庫県姫路市），2015/12/02-04.]
      田村仁，柳長門，高畑一也，相良明男，伊藤悟，橋爪秀利
    • 分割型高温超伝導マグネットが切り開く核融合炉の未来，
      [日本原子力学会・東北支部会第39回研究発表会，東北大学片平キャンパス（宮城県仙台市），2015/12/18.]
      橋爪秀利，伊藤悟，遊佐訓孝
    • X線CTによる分割型高温超伝導マグネットの接合性能予測法の検討，
      [日本原子力学会・東北支部会第39回研究発表会，東北大学片平キャンパス（宮城県仙台市），2015/12/18.]
      陳偉熙，伊藤悟，遊佐訓孝，橋爪秀利
    • 低周波振動に基づくボルト緩み検出技術の開発 ，
      [日本原子力学会2016年春の年会，東北大学川内キャンパス（宮城県仙台市），2016/03/26-28.]
      遊佐訓孝，沢田作雄
    • Na冷却高速炉における大口径配管の流力振動評価に関する研究 (45) 3段エルボ配管における旋回流流入時の流動場の詳細可視化 ，
      [日本原子力学会2016年春の年会，東北大学川内キャンパス（宮城県仙台市），2016/03/26-28.]
      水谷淳，江原真司，橋爪秀利，山野秀将
    • Na冷却高速炉における大口径配管の流力振動評価・ﾉ関する研究 (46) 3段エルボ配管における旋回流流入時の圧力変動特性，
      [日本原子力学会2016年春の年会，東北大学川内キャンパス（宮城県仙台市），2016/03/26-28.]
      細田孝峻，水谷淳，江原真司，橋爪秀利，山野秀将
    • 分割型高温超伝導マグネットの接合/冷却技術の研究進展 (1) 金属多孔質挿入流路の熱伝導特性，
      [日本原子力学会2016年春の年会，東北大学川内キャンパス（宮城県仙台市），2016/03/26-28.]
      伊藤悟，佐々木駿介，橋爪秀利
    • 分割型高温超伝導マグネットの接合/冷却技術の研究進展 (2) 接合部製作時の温度制御による接合抵抗低減，
      [日本原子力学会2016年春の年会，東北大学川内キャンパス（宮城県仙台市），2016/03/26-28.]
      西尾樹，伊藤悟，橋爪秀利
    • Research progress in joint and cooling techniques for a remountable high-temperature superconducting magnet (3) Evaluation of shear strength of mechanical joint，
      [日本原子力学会2016年春の年会，東北大学川内キャンパス（宮城県仙台市），2016/03/26-28.]
      アパリシオルイス，伊藤悟，橋爪秀利
    • 分割型高温超伝導マグネットの接合/冷却技術の研究進展 (4) Ｘ線CTによる接合状態の分析，
      [日本原子力学会2016年春の年会，東北大学川内キャンパス（宮城県仙台市），2016/03/26-28.]
      陳偉熙，遊佐訓孝，伊藤悟，橋爪秀利
    • 放射性廃棄物の核変換処理を目的とした核融合炉溶融塩ブランケット成立性検討 (1) MAの燃焼解析に基づく核的性能評価，
      [日本原子力学会2016年春の年会，東北大学川内キャンパス（宮城県仙台市），2016/03/26-28.]
      古館佑樹，宍戸博紀，遊佐訓孝，橋爪秀利
    • 放射性廃棄物の核変換処理を目的とした核融合炉溶融塩ブランケット成立性検討 (2) 分子動力学法を用いたFlinabeの熱物性評価，
      [日本原子力学会2016年春の年会，東北大学川内キャンパス（宮城県仙台市），2016/03/26-28.]
      宍戸博紀，古館佑樹，遊佐訓孝，橋爪秀利，石井良樹，大鳥範和
    • 低周波磁場計測による炭素鋼配管の減肉モニタリング手法の開発，
      [日本原子力学会2016年春の年会，東北大学川内キャンパス（宮城県仙台市），2016/03/26-28.]
      田島直樹，遊佐訓孝，橋爪秀利

    2014

    [Journal]

    • An arrayed uniform eddy current probe design for crack monitoring and sizing of surface breaking cracks with the aid of a computational inversion technique,
      [NDT&E International 61 (2014), 29-34 ]
      N. Yusa, H. Hashizume, R. Urayama, T. Uchimoto, T. Takagi, K. Sato
    • Characteristic Evaluation of Cooling Technique using Liquid Nitrogen and Metal Porous Media,
      [Advances in Cryogenic Engineering, AIP conf. Proc. 1573, (2014), 597-604.]
      Y. Tanno, S. Ito, H. Hashizume
    • Performance of a Mechanical Bridge Joint for 30-kA-class High-temperature Superconducting Conductors,
      [IEEE Transactions on Applied Superconductivity, 24(3) (2014), 4602305]
      S. Ito, K. Kawai, Y. Seino, T. Ohinata, Y. Tanno, N. Yanagi, Y. Terazaki, K. Natsume, S. Hamaguchi, H. Noguchi, H. Tamura, T. Mito, A. Sagara, H. Hashizume
    • Joint Resistance Characteristics of Mechanical Lap Joint of a GdBCO Tape with a Change in Temperature and Magnetic Field,
      [IEEE Transactions on Applied Superconductivity, 24(3) (2014), 4602105.]
      Y. Seino, S. Ito, H.Hashizume
    • Progress of the Design of HTS Magnet Option and R&D Activities for the Helical Fusion Reactor,
      [IEEE Transactions on Applied Superconductivity, 24(3) (2014), 4202805.]
      N. Yanagi, Y. Terazaki, S. Ito, K. Kawai, Y. Seino, T. Ohinata, Y. Tanno, K. Natsume, S. Hamaguchi, H. Noguchi, H. Tamura, T. Mito, H. Hashizume, A. Sagara
    • Critical current measurement of 30 kA class HTS conductor samples,
      [IEEE Transactions on Applied Superconductivity, 24(3) (2014), 4801305.]
      Y. Terazaki, N. Yanagi, S. Ito, K. Kawai, Y. Seino, T. Ohinata, Y. Tanno, K. Natsume, S. Hamaguchi, H. Noguchi, H. Tamura, T. Mito, H. Hashizume, A. Sagara
    • Evaluation of the electromagnetic characteristics of type 316L stainless steel welds from the viewpoint of eddy current inspections,
      [Journal of Nuclear Science and Technology 51 (2014), 127-132]
      N. Yusa, H. Hashizume, T. Uchimoto, T. Takagi, K. Sato
    • 拡散接合を用いた複雑形状模擬きず製作技術の開発,
      [非破壊検査 63(3) (2014), 148-152.]
      遊佐訓孝, 王晶, 橋爪秀利
    • 磁性を有する鋼材に発生した表面開口割れの深さ評価のための渦電流探傷技術の開発,
      [鉄と鋼 100(2014), 1339-1346.]
      遊佐訓孝, 橋爪秀利
    • Feasibility of HTS Magnet Option for Fusion Reactors,
      [Plasma and Fusion Research, 9 (2014), 1405013.]
      N. Yanagi, S. Ito, Y. Terazaki, K. Natsume, H. Tamura, S. Hamaguchi, T. Mito, H. Hashizume, J. Morikawa, Y. Ogawa, M. Iwakuma, A. Sagara
    • Design prospect of remountable high-temperature superconducting magnet,
      [Fusion Engineering and Design, 89(9-10) (2014), 2241-2245.]
      H. Hashizume, S. Ito
    • Numerical study of the MHD flow characteristics in a three-surface-multi-layered channel with different inlet conditions,
      [Fusion Engineering and Design, 89(7-8) (2014), 1227-1231.]
      M. Aoyagi, S. Ito, H. Hashizume
    • Bridge-Type Mechanical Lap Joint of a 100 kA-Class HTS Conductor having Stacks of GdBCO Tapes,
      [Plasma and Fusion Research, 9 (2014), 3405086.]
      S. Ito, Y. Seino, N. Yanagi, Y. Terazaki, A. Sagara, H. Hashizume
    [International Conference / Proceedings ]
    • Development of electromagnetic non-destructive testing method for the inspection of heat exchanger tubes of Japan Sodium-Cooled Fast Reactor -Part I Application of remote field eddy current testing,
      [The 19th International Workshop on Electromagnetic Nondestructive Evaluation, Xi'an, China, 2014/06/25-28.]
      N. Yusa, H. Shishido, H. Hashizume
    • Development of electromagnetic non-destructive testing method for the inspection of heat exchanger tubes of Japan Sodium-Cooled Fast Reactor -Part II Detection of flaws on the inner surface using electromagnetic waves,
      [The 19th International Workshop on Electromagnetic Nondestructive Evaluation, Xi'an, China, 2014/06/25-28.]
      K. Sasaki, N. Yusa, H. Hashizume
    • Numerical modeling of thermal fatigue crack from viewpoint of eddy current testing,
      [The 19th International Workshop on Electromagnetic Nondestructive Evaluation, Xi'an, China, 2014/06/25-28.]
      J. Wang, N. Yusa, M. Kemppainen, I. Virkkunen, H. Hashizume
    • Flow Visualization Experiment of a Swirling Flow Formed Downstream of a Piping with Successive Three Elbow to Be Applied to Divertor Cooling,
      [2014 22nd International Conference on Nuclear Engineering, Prague, Czech Republic, 2014/07/7-11.]
      S. Kodate, S. Ebara, H. Hashizume
    • Fundamental investigation on tensile characteristics of mechanical lap joint of a REBCO tape,
      [Applied superconductivity conference 2014, Charlotte, NC, USA, 2014/08/10-15.]
      S. Ito, H. Oguro, H. Tamura, N. Yanagi, H. Hashizume
    • Investigation of influences of film resistance and magnetic field on contact resistance in mechanical lap joint of a GdBCO tape,
      [Applied superconductivity conference 2014, Charlotte, NC, USA, 2014/08/10-15.]
      Y. Seino, S. Ito, H. Oguro, H. Hashizume
    • Advanced Machine learning Algorithm Application for Rotating Machine Health Monitoring, International Symposium on Future I&C for Nuclear Power Plants 2014/International Symposium on Symbiotic Nuclear Power Systems 2014,
      [Jeju, Korea, 2014/08/24-28.]
      S. Kanemoto, M. Watanabe, N. Yusa
    • Development on Microwave Nondestructive Testing of a Wall Thinning inside a Pipe by Optimizing the Frequency Range of Incident Microwaves,
      [Eleventh International Conference on Flow Dynamics, Sendai, Japan, 2014/10/08-10.]
      K. Sasaki, N. Yusa, H. Hashizume
    • Numerical investigation of the ill-posedness of inverse problems to size a crack from eddy current signals,
      [The 2nd International Conference on Maintenance Science and Technology, Kobe, Japan, 2014/11/02-05. ]
      N. Yusa, H. Shishido, H. Hashizume
    • Evaluation of the Applicability of Efficient Nondestructive Testing Using Microwave for Wall Thinning Inside a Long-range Metal Pipe,
      [The 2nd International Conference on Maintenance Science and Technology, Kobe, Japan, 2014/11/02-05.]
      K. Sasaki, N. Yusa, H. Hashizume
    • Evaluation of physical properties of molten salt mixture Flinabe for a fusion blanket system using molecular dynamics simulation,
      [21st Topical Meeting on the Technology of Fusion Energy, Anaheim, USA, 2014/11/09-13.]
      H. Shishido, N. Yusa, H. Hashizume, Y. Ishiii, N. Ohtori
    • Boiling Heat Transfer Characteristics of a Cryogenic Coolant with Metal Porous Media and Thermal Analysis on a Segmented High-Temperature Superconducting Magnet,
      [21st Topical Meeting on the Technology of Fusion Energy, Anaheim, USA, 2014/11/09-13.]
      S. Ito, H. Hashizume
    • Overview of the Fusion Engineering in Japan,
      [21st Topical Meeting on the Technology of Fusion Energy, Anaheim, USA, 2014/11/09-13.]
      H. Hashizume, T. Nishitani, S. Konishi, Y. Ueda , S. Fukada and A. Sagara
  • Influence of Piping Layout upon the Characteristics of Flow Separation and Pressure Fluctuation in the Primary Cold-leg of Sodium Cooled Fast Reactor,
    [10th International Topical Meeting on Nuclear Thermal Hydraulics, Operation and Safety (NUTHOS-10) , Ginowan, 2014/12/14-18.]
    J. Mizutani, S. Ebara, H. Hashizume [国内学会発表]
    • ヘリカル型核融合炉の高温超伝導オプション設計と100 kA級導体開発の進展，
      [第 89 回（2014年春季）低温工学・超電導学会，タワーホール船堀（東京都江戸川区），2014/05/26-28.]
      柳長門，寺ｱ義朗，伊藤悟，清野祐太郎，濱口真司，田村仁，三戸利行，橋爪秀利，相良明男
    • ヘリカル型核融合炉用100 kA級高温超伝導導体の臨界電流測定と解析，
      [第 89 回（2014年春季）低温工学・超電導学会，タワーホール船堀（東京都江戸川区），2014/05/26-28.]
      寺ｱ義朗，柳長門，伊藤悟，清野祐太郎，濱口真司，田村仁，三戸利行，橋爪秀利，相良明男
    • ヘリカル型核融合炉用100 kA級高温超伝導導体の開発 (1)設計と試験の概要，
      [第10回核融合エネルギー講演会，つくば国際会議場（茨城県つくば市），2014/06/19-20.]
      柳長門，伊藤悟，寺ｱ義朗， 清野祐太郎， 濱口真司，田村仁，宮澤順一，三戸利行，橋爪秀利，相良明男
    • ヘリカル型核融合炉用100kA級高温超伝導導体の開発 (2)機械的ブリッジジョイントの抵抗評価，
      [第10回核融合エネルギー講演会，つくば国際会議場（茨城県つくば市），2014/06/19-20.]
      伊藤悟，清野祐太郎，柳長門，寺ｱ義朗，相良明男，橋爪秀利
    • ヘリカル型核融合炉用100kA級高温超伝導導体の開発 (3)通電特性の解析，
      [第10回核融合エネルギー講演会，つくば国際会議場（茨城県つくば市），2014/06/19-20.]
      寺ｱ義朗，柳長門，伊藤悟，清野祐太郎，濱口真司，田村仁，三戸利行，橋爪秀利，相良明男
    • 接合面粗さ変更によるGdBCO線材の機械的接合における皮膜抵抗の影響の低減，
      [第10回核融合エネルギー講演会，つくば国際会議場（茨城県つくば市），2014/06/19-20.]
      清野祐太郎，伊藤悟，橋爪秀利
    • 連続立体エルボ配管下流で生じる旋回流の可視化計測とダイバータ冷却への適用可能性の検討，
      [第10回核融合エネルギー講演会，つくば国際会議場（茨城県つくば市），2014/06/19-20.]
      古舘翔一，江原真司，橋爪秀利
    • FLiNaBe溶融塩ブランケットシステムにおける核転換解析，
      [第19回動力・エネルギー技術シンポジウム，福井県民ホール（福井県福井市），2014/06/26-27.]
      宍戸博紀，古館祐樹，遊佐訓孝，橋爪秀利
    • オリフィス下流部に生じる配管減肉の低減に関する研究，
      [第19回動力・エネルギー技術シンポジウム，福井県民ホール（福井県福井市），2014/06/26-27.]
      加藤雅子，江原真司，橋爪秀利
    • Na冷却高速炉1次系コールドレグにおける配管レイアウトのエルボ下流への影響評価，
      [第19回動力・エネルギー技術シンポジウム，福井県民ホール（福井県福井市），2014/06/26-27.]
      水谷淳，江原真司，橋爪秀利，山野秀将
    • 長尺配管内壁面広域・鼕∫T傷のためのマイクロ波探傷法の開発，
      [日本保全学会第11回学術講演会，八戸工業大学（青森県八戸市），2014/07/23-25.]
      橋爪秀利，佐々木幸太，遊佐訓孝
    • 導体接続方式ヘリカルコイル設計のためのREBCOテープの機械的ラップジョイントの引張・せん断強度評価，
      [第 90 回（2014年秋季）低温工学・超電導学会，コラッセふくしま（福島県福島市），2014/11/05-07.]
      伊藤 悟，小黒英俊，田村 仁，柳 長門，相良 明男，橋爪 秀利
    • ヘリカル型核融合炉への適用をめざした大電流高温超伝導単純積層導体の電流分布解析，
      [第 90 回（2014年秋季）低温工学・超電導学会，コラッセふくしま（福島県福島市），2014/11/05-07.]
      寺ｱ義朗，柳長門，濱口真司，田村仁，三戸利行，相良明男，伊藤悟，清野祐太郎，橋爪秀利
    • FFHR-d1 における新型ダイバータの提案とヘリカルコイル支持構造物の構造解析，
      [第 90 回（2014年秋季）低温工学・超電導学会，コラッセふくしま（福島県福島市），2014/11/05-07.]
      田村仁，後藤拓也，渡辺二太，田中照也，宮澤順一，増崎貴，柳長門，相良明男，伊藤 悟，橋爪秀利
    • REBCO線材の機械的接合性能の向上に向けた接合部温度制御の最適化，
      [日本原子力学会・東北支部会 第38回研究発表会，東北大学青葉山キャンパス（宮城県仙台市），2014/12/05.]
      西尾樹，伊藤悟，橋爪秀利
    • エルボ下流自己形成流動場を利用したダイバータ冷却に向けた全周加熱条件下における除熱性能評価，
      [日本原子力学会・東北支部会 第38回研究発表会，東北大学青葉山キャンパス（宮城県仙台市），2014/12/05.]
      古舘翔一，江原真司，橋爪秀利
    • 複数きずパラメータを考慮したPODモデルの開発，
      [日本原子力学会2015春の年会，茨城大学日立キャンパス（茨城県日立市），2015/03/20-22.]
      遊佐訓孝，橋爪秀利
    • 核変換を目的とした新型溶融塩ブランケットの核的性能に対するペブルの影響評価，
      [日本原子力学会2015春の年会，茨城大学日立キャンパス（茨城県日立市），2015/03/20-22.]
      古館佑樹，宍戸博紀，遊佐訓孝，橋爪秀利
    • 分割型高温超伝導マグネットの接合性能予測手法の高度化 (1) 接合抵抗の温度・磁場依存性予測，
      [日本原子力学会2015春の年会，茨城大学日立キャンパス（茨城県日立市），2015/03/20-22.]
      伊藤悟，清野祐太郎，橋爪秀利，小黒英俊
    • 分割型高温超伝導マグネットの接合性能予測手法の高度化 (2) 接合部製作時の温度制御の最適化，
      [日本原子力学会2015春の年会，茨城大学日立キャンパス（茨城県日立市），2015/03/20-22.]
      西尾樹，伊藤悟・C橋爪秀利
    • 分割型高温超伝導マグネットの接合性能予測手法の高度化 (3) 電磁非破壊検査による接合性能予測，
      [日本原子力学会2015春の年会，茨城大学日立キャンパス（茨城県日立市），2015/03/20-22.]
      陳偉熙，伊藤悟，遊佐訓孝，橋爪秀利
    • 三面複層コーティング流路におけるMHD圧力損失の金属層構造依存性評価，
      [日本原子力学会2015春の年会，茨城大学日立キャンパス（茨城県日立市），2015/03/20-22.]
      一色大地，伊藤悟，橋爪秀利
    • 原子炉の安全性の理解を目的としたPCシミュレータを用いた大学院教育の試み，
      [日本原子力学会2015春の年会，茨城大学日立キャンパス（茨城県日立市），2015/03/20-22.]
      高橋信，遊佐訓孝，橋爪秀利

    2013

    [Journal] [International Conference / Proceedings ]
    • Influence of frequency characteristics of velocity fluctuations in complex turbulent flow downstream of an orifice upon pipe wall thinning,
      [15th International Topical Meeting on Nuclear Reactor Thermalhaydraulics (Nureth-15), Pisa, Italy, 2013/05/12-17.]
      S. Ebara, H. Yanai, H. Hashizume
    • Experimental study about the influence of liquid film formed just downstream of an orifice upon pipe wall thinning,
      [15th International Topical Meeting on Nuclear Reactor Thermalhaydraulics (Nureth-15), Pisa, Italy, 2013/05/12-17.]
      M. Umehara, S. Ebara, H. Hashizume
    • Characteristic Evaluation of Cooling Technique using Liquid Nitrogen and Metal Porous Media,
      [Cryogenic Engineering Conference and International Cryogenic Materials Conference 2013, Anchorage, Alaska, USA, 2013/06/17-21.]
      Y. Tanno, S. Ito, H. Hashizume
    • A novel side-incidence probe with numerically optimized parameters for online microwave remote NDE of pipe wall thinning,
      [The 18th International Workshop on Electromagnetic Nondestructive Evaluation, Bratislava, Slovak Republic, 2013/06/25-28.]
      K. Sasaki, L. Liu, N. Yusa, H. Hashizume
    • Numerical modeling of real cracks for electromagnetic nondestructive inverse problems,
      [The 18th International Workshop on Electromagnetic Nondestructive Evaluation, Bratislava, Slovak Republic, 2013/06/25-28.]
      N. Yusa
    • Performance Evaluation of the Mechanical Bridge Joint for 30 kA Class HTS Conductor Samples,
      [The 23rd International Conference on Magnet Technology, Boston, USA, 2013/07/14-19.]
      S. Ito, K. Kawai, Y. Seino, T. Ohinata, Y. Tanno, N. Yanagi, Y. Terazaki, K. Natsume, S. Hamaguchi, H. Noguchi, H. Tamura, T. Mito, A. Sagara, H. Hashizume
    • Joint Resistance Characteristics of Mechanical Lap Joint of a GdBCO Tape with a Change in Temperature and Magnetic Field,
      [The 23rd International Conference on Magnet Technology, Boston, USA, 2013/07/14-19.]
      Y. Seino, S. Ito, H. Hashizume
    • Proposal of a novel blanket system using LiF-BeF2-LiI for a fusion reactor,
      [21st International Conference on Nuclear Engineering, Chengdu, China, 2013/07/29-08/02.]
      H. Shishido, Y. Han, K. Matsui, N. Yusa, H. Hashizume
    • Modeling of thermal fatigue crack for enhancement of electromagnetic nondestructive evaluation of nuclear power plant,
      [21st International Conference on Nuclear Engineering, Chengdu, China, 2013/07/29-08/02.]
      J. Wang, N. Yusa, H. Pan, H. Hashizume
    • Diversity and integration of rotating machine health monitoring methods,
      [2013 Prognostics and System Health Management Conference PHM-2013, Milan, Italy, 2013/09/8-11.]
      S. Kanemoto, N. Yokotsuka, N. Yusa, M. Kawabata
    • Design prospect of remountable high-temperature superconducting magnet,
      [11th International Symposium on Fusion Nuclear Technology, Barcelona, Spain, 2013/9/16-20.]
      H. Hashizume, S. Ito
    • Numerical study of the MHD flow characteristics in a three-surface-multi-layered channel with different inlet conditions,
      [11th International Symposium on Fusion Nuclear Technology, Barcelona, Spain, 2013/9/16-20.]
      M. Aoyagi, S. Ito, H. Hashizume
    • Visualization Experiment of Complex Flow Field in a Sphere-packed Pipe by Detailed PIV measurement,
      [11th International Symposium on Fusion Nuclear Technology, Barcelona, Spain, 2013/9/16-20.]
      S. Ebara, M.R. Nematollahi, H. Hashizume, S. Ito
    • Bridge-type mechanical lap joint of a 100 kA-class HTS conductor having stacks of GdBCO tapes,
      [23rd International Toki Conference, Toki, Japan, 2013/11/18-22.]
      S. Ito, Y. Seino, N. Yanagi, Y. Terazaki, A. Sagara, H. Hashizume
    • Numerical evaluation of the effect of the mode of microwave propagating inside a pipe on the detectability of a microwave nondestructive testing method,
      [Tenth International Conference on Flow Dynamics, Sendai, Japan, 2013/11/25-27.]
      N. Yusa, K. Sasaki, H. Hashizume
    • Experimental evaluation of the applicability of a sided-incidence microwave probe for a microwave nondestructive testing method,
      [Tenth International Conference on Flow Dynamics, Sendai, Japan, 2013/11/25-27.]
      K. Sasaki, N. Yusa, H. Hashizume,
    • A round-robin project in Japan for the evaluation of nondestructive responses of natural flaws,
      [2013 International Conference on Energy, Environment and Sustainable Economy, Bangkok, Thailand, 2013/12/01-04.]
      N. Yusa, J. Wang, V. Iikka
    [Patent]
    • 模擬応力腐食割れ製作技術,
      発明者：遊佐訓孝，内一哲哉，高木敏行，橋爪秀利；登録日：平成２５年１０月２５日；特許第５３９２７７９号

    2012

    [Journal]

    [International Conference / Proceedings ]
    • Finite element modeling of stress corrosion cracking for electromagnetic nondestructive evaluations,
      [The 18th Pacific Basin Nuclear Conference (PBNC2012), Busan, Korea, 2012/03/18-23.]
      J. Wang, N. Yusa, H. Pan, H. Hashizume
    • Discussion on distributed conductivity for modeling stress corrosion crack in eddy current testing,
      [The Sixth International Conference on Electromagnetic Field Problems and Applications, Dalian, China, 2012/06/19-21.]
      J. Wang, N. Yusa, H. Pan, H. Hashizume
    • Experimental investigation of influence of inlet flow conditions on swirling flow generated in a three-dimensionally connected dual elbow,
      [International Symposium on Flow Visualization, Minsk, Belarus, 2012/06/25-28.]
      T. Kubo, S. Ebara, H. Hashizume
    • Flow structure of high Reynolds number flow in a dual-elbow piping simulating cold-legs of JSFR,
      [International Symposium on Flow Visualization, Minsk, Belarus, 2012/06/25-28.]
      H. Takamura, S. Ebara, H. Yamano, H. Hashizume
    • Effect of shape of shield on the sensitivity of remote field eddy current testing for inspecting flaw of large diameter tube,
      [Ninth International Conference on Flow Dynamics (ICFD2012), Sendai, Japan, 2012/09/19-21.]
      J. Wang, N. Yusa, H. Pan, H. Hashizume,
    • A novel approach of microwaves on remote and nondestructive detection of both gradual and abrupt wall thinning inside a metal pipe,
      [Ninth International Conference on Flow Dynamics (ICFD2012), Sendai, Japan, 2012/09/19-21.]
      L. Liu, K. Sasaki, N. Yusa, H. Hashizume
    • Thermal Analysis on a Remountable High Temperature Superconducting Magnet around Jointing Region,
      [Ninth International Conference on Flow Dynamics (ICFD2012), Sendai, Japan, 2012/09/19-21.]
      Y. Tanno, S. Ito, H. Hashizume
    • Structure improvement of demountable edge joint of a stacked REBCO conductor within a metal jacket,
      [Applied Superconductivity Conference 2012 (ASC2012), Portland, OR, USA, 2012/10/7-12.]
      S. Ito, L. Bromberg, H. Hashizume
    • Improvement of mechanical butt joint of a stacked REBCO conductor by optimizing conductor structure,
      [Applied Superconductivity Conference 2012 (ASC2012), Portland, OR, USA, 2012/10/7-12.]
      T. Ohinata, S. Ito, H. Hashizume
    • Optimization of mechanical bridge-joint structure in a stacked HTS conductor,
      [Applied Superconductivity Conference 2012 (ASC2012), Portland, OR, USA, 2012/10/7-12.]
      K. Kawai, Y. Seino, S. Ito, Y. Yanagi, H. Tamura, A. Sagara, H. Hashizume
    • Development on microwave nondestructive testing of a wall thinning inside a pipe by optimizing microwave probe and analyzing wall thinning profile,
      [1st International Conference on Maintenance Science and Technology Tokyo 2012 (ICMST-Tokyo 2012), Tokyo, Japan, 2012/11/11-14.]
      K. Sasaki, L. Liu, N. Yusa, T. Wakai, H. Hashizume
    • Fabrication of an artificial flaw with an arbitrary profile and non-destructive response for the development of NDT&E techniques,
      [1st International Conference on Maintenance Science and Technology Tokyo 2012 (ICMST-Tokyo 2012), Tokyo, Japan, 2012/11/11-14.]
      N. Yusa, K. Sasaki, H. Hashizume
    • A study on the distribution of electric conductivity around a stress corrosion crack,
      [1st International Conference on Maintenance Science and Technology Tokyo 2012 (ICMST-Tokyo 2012), Tokyo, Japan, 2012/11/11-14.]
      Z. Chen, T. Huang, L. Wang, N. Yusa
    • Verification Test of a Three-Surface-Multi-Layered Channel to Reduce MHD Pressure Drop,
      [The Eighth Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS8), Beppu, Japan, 2012/12/9-12.]
      M. Aoyagi, Y. Inage, S. Ito, S. Ebara, Y. Ueki, K. Yuki, F. Li, S. Smolentsev, T. Yokomine, T. Kunugi, T. Sketchley, M. Abdou, H. Hashizume
    • Design Improvement of Three-Surface-Multi-Layered Channel by Reinforceing Inner Metal Layer,
      [The Eighth Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS8), Beppu, Japan, 2012/12/9-12.]
      Y. Inage, M. Aoyagi, S. Ito, H. Hashizume
    • Effects of Separation Vortices on Pressure Fluctuation of Complex Turbulent Flow in a Dual Elbow with Small Curvature Radius in a Three-Dimensional Layout,
      [The Eighth Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS8), Beppu, Japan, 2012/12/9-12.]
      S. Ebara, H. Konno, H. Hashizume, T. Kaneko, H. Yamano

    2011

    [Journal]

    [International Conference / Proceedings ]
    • Experimental estimation in characteristics of swirling flow appearing in a three-dimensionally connected dual elbow layout by means of matched refractive-index PIV measurement,
      [The 11th Asian Symposium on Visualization, Niigata, Japan, 2011/6/5-9.]
      T. Kubo, H. Yanai, S. Ebara, H. Hashizume
    • Proposal of electrical edge joint for a demountable high-temperature superconducting magnet.
      [The 38th International Conference on Plasma Science and 24th Symposium on Fusion Engineering, Chicago, USA, 2011/6/26-30.]
      S. Ito, L. Bromberg, M. Takayasu, J. V. Minervini, H. Hashizume
    • PIV measurements of a complex turbulent flow in a short elbow piping under a high Reynolds number condition.
      [The 9th International Symposium on Particle Image Velocimetry, Kobe, Japan, 2011/7/21-23.]
      H. Takamura, H. Konno, S. Ebara, H. Hashizume, K. Aizawa, H. Yamano
    • Practical numerical modeling for electromagnetic nondestructive testing and evaluations.
      [2011 Far-East NDT Forum, Hangzhou, Chiha, 2011/05/31-2011/0/6/02.]
      N. Yusa
    • The Fukushima accident.
      [15th International Symposium on Applied Electromagnetics and Mechanics, Napoli, Italy, 2011/09/06-09.]
      H. Hashizume
    • Fabrication of imitative stress corrosion cracking specimen using lithography and solid state bonding.
      [15th International Symposium on Applied Electromagnetics and Mechanics, Napoli, Italy, 2011/09/06-09.]
      N. Yusa, H. Hashizume
    • Improvement of crack radar system to detect flaws in pipes.
      [15th International Symposium on Applied Electromagnetics and Mechanics, Napoli, Italy, 2011/09/06-09.]
      H. Hashizume, N. Yusa, Y. Sakai
    • Evaluation of advanced Flibe blanket using Cs.
      [The 10th International Symposium on Fusion Nuclear Technology, Portrald, USA, 2011/09/11-16.]
      K. Matsui, N. Yusa, D. Komiyama, A. Suzuki, A. Sagara, H. Hashizume
    • Influence of strain distribution on joint resistance in mechanical lap joint of a stacked HTS conductor
      [22nd International Conference on Magnet Technology, Marseille, France, 2011/09/12-16.]
      S. Ito, H. Hashizume
    • Comparison between remote field eddy current testing and conventional low frequency eddy current testing for inspecting flaws in large diameter tubes from outside
      [The Eighth International Conference on Flow Dynamics (ICFD2011), Sendai, Japan, 2011/11/09-11.]
      J. Wang, N. Yusa, H. Pan, H. Hashizume
    • Pressure fluctuation characteristics of complex turbulent flow in a dual elbow with small curvature radius in a three-dimensional layout
      [The Eighth International Conference on Flow Dynamics (ICFD2011), Sendai, Japan, 2011/11/09-11.]
      H. Konno, S. Ebara, H. Hashizume, H. Yamano, K. Aizawa
    • Discussion of structural design issues on a remountable high-temperature superconducting magnet,
      [21st International Toki Conference (ITC-21), Toki, Japan, 2011/11/28-12/01.]
      S. Ito, H. Hashizume, H. Tamura, N. Yanagi, S. Imagawa, A. Sagara
    • Evaluation of heat transfer performance for a sphere-packed pipe by using molten salt under high heat flux condition,
      [21st International Toki Conference (ITC-21), Toki, Japan, 2011/11/28-12/01.]
      A. Watanabe, S. Ebara, H. Hashizume, A. Sagara
    • Fundamental evaluation of joint resistance in mechanical butt joint of a stacked GdBCO conductor
      [21st International Toki Conference (ITC-21), Toki, Japan, 2011/11/28-12/01]
      T. Ohinata, S. Ito, H. Hashizume,

    2010

    [Journal]

    • Key issues to enable heat flux removal exceeding 10MW/m2 by use of metal porous media as latent-heat transfer device,
      [Special Topics & Reviews in Porous Media 1(1) (2010), 1-13.]
      K. Yuki, K. Suzuki, H. Hashizume, S. Toda.
    • Thermohydraulic analysis of high-Prandtl-number fluid in complex duct simulating first wall in fusion reactor,
      [Fusion Engineering and Design 85 (2010), 234-242.]
      M. Satake, K. Yuki, H. Hashizume.
    • A project aiming at the enhancement of NDT&E of stress corrosion cracking.
      [International Journal of Applied Electromagnetics and Mechanics 33 (2010), 1587-1590.]
      N. Yusa, K. Miya, I. Komura, Z. Chen.
    • Numerical analysis of an electromagnetic nondestructive evaluation method for rotating machinery.
      [International Journal of Applied Electromagnetics and Mechanics 33 (2010), 1101-1107.]
      H. Huang, R. Kayata, S. Perrin, N. Yusa, K. Miya.
    • Effect of thermal strain on the mechanical butt joint of a stacked HTS cable with a metal jacket,
      [IEEE Transactions on Applied Superconductivity 20(3) (2010) 1747-1750.]
      S. Ito, T. Sakashita, H. Hashizume.
    • Improvement of Joint Structure for Mechanical Butt Joint of Stacked BSCCO 2223 Cable,
      [IEEE Transactions on Applied Superconductivity 20(3) (2010) 1751-1754.]
      T. Sakashita, S. Ito, H. Hashizume.
    • MHD pressure drop characteristics in a three-surface-multi-layered channel under a strong magnetic field,
      [Fusion Engineering and Design 85(7-9), (2010)1181-1184.]
      M. Aoyagi, S. Ito, H. Hashizume, T. Muroga.
    • Numerical simulation of turbulent flow in microscopic pore scale of pebble bed by large-eddy simulation,
      [Fusion Engineering and Design 85(7-9) (2010), 1638-1641. ]
      S. Ebara, T. Yokomine, A. Shimizu, H. Hashizume.
    • Pressure Fluctuation Characteristics of Complex Turbulent Flow in a Single Elbow with Small Curvature Radius for a Sodium-Cooled Fast Reactor,
      [ Journal of Fluids Engineering 132 (11) Nov. 111102. ]
      S. Ebara, Y. Aoya, T. Sato, H. Hashizume, Y. Kazuhisa, K. Aizawa, H. Yamano.
    • Numerical Simulation of MHD Turbulent Flow in a Rectangular Channel with Three-Surface-Coated Multi Layers,
      [ International Journal of Fluid Mechanics Research, 37(5) (2010), 447-457. ]
      M. Aoyagi, H. Hashizume, K. Yuki, S. Ito, Takeo Muroga.
    [International Conference / Proceedings ]
    • Advanced cryogenics cooling technique using metal porous media with liquid nitrogen.
      [Proceedings of ICEC 22-ICMC,(2009)] S. Ito, K. Yuki, H. Hashizume
    • Pressure measurement test of single elbow simulating Na-cooled fast reactor cold-leg piping,
      [18th International Conference on Nuclear Engineering (ICONE-18), Xi-an, China, 2010/05/17-21]
      S. Ebara, Y. Aoya, T. Sato, H. Hashizume, K. Yuki, K. Aizawa, H. Yamano.
    • Evaluation of microwave in pipes for inspection.
      [The 15th International Workshop on Electromagnetic Nondestructive Evaluation, Szczecin, Poland, 2010/06/13-16]
      Y. Sakai, N. Yusa, S. Ito, H. Hashizume.
    • Fabrication of imitative stress corrosion cracking specimens for electric nondestructive evaluations.
      [The 15th International Workshop on Electromagnetic Nondestructive Evaluation, Szczecin, Poland, 2010/06/13-16]
      N. Yusa, T. Uchimoto, T. Takagi, H. Hashizume.
    • Investigation of the features of the electric conductivity around a stress corrosion crack,
      [The 15th International Workshop on Electromagnetic Nondestructive Evaluation, Szczecin, Poland, 2010/06/13-16]
      Z. Chen, T. Hwang, L. Wang, S. Tian, N. Yusa.
    • Investigation of an optimum structure for mechanical butt joint of a stacked HTS cable with a metal jacket,
      [Applied Superconductivity Conference 2010, Washington, D.C., USA, 2010/08/01-06]
      S. Ito, T. Sakashita, H. Hashizume.
    • Analysis of generating mechanism of liquid droplet jet stream at the orifice downstream area,
      [The 8th International Topical Meeting on Nuclear Thermal-Hydraulics, Operation and Safety (NUHTOS-8), Shanghai, China, 2010/10/10-14]
      M. Umehara, S. Ebara, H. Hashizume.
    • Investigation of influence of inlet flow conditions on flow structure in a dual elbow,
      [The 8th International Topical Meeting on Nuclear Thermal-Hydraulics, Operation and Safety (NUHTOS-8), Shanghai, China, 2010/10/10-14]
      H. Yanai, S. Ebara, H. Hashizume.
    • Transmutation process of 90Sr with 14 MeV neutron by nuclear fusion.
      [Joint International Conference on Supercomputing in Nuclear Applications + Monte Carlo 2010 (SNA+MC2010), Tokyo, 2010/10/17-20]
      K. Matsui, N. Yusa, H. Hashizume.
    • PIV measurement for dual elbow flow using 1/7-scale model of cold-leg piping in a sodium-cooled fast reactor,
      [7th International Conference on Flow Dynamics (ICFD2010), Sendai, 2010/11/01-03]
      S. Ebara, T. Sato, H. Hashizume, K. Aizawa and H. Yamano,
    • The Effects of wall thinning shapes on microwave testing for piping,
      [7th International Conference on Flow Dynamics (ICFD2010), Sendai, 2010/11/01-03]
      Y. Sakai, N. Yusa, H. Hashizume.
    • Thermofluid simulation in a liquid metal blanket with three-surface-multi-layered channel,
      [19th Topical Meeting on the Technology of Fusion Energy, Las Vegas, Nevada, USA, 2010/11/07-11]
      M. Aoyagi, S. Ito, S. Ebara, H. Hashizume, T. Muroga.
    • Heat transfer experiments using a high Pr number fluid flowing in sphere-packed pipe for flibe blanket design,
      [19th Topical Meeting on the Technology of Fusion Energy, Las Vegas, Nevada, USA, 2010/11/07-11]
      K. Shimizu, S. Ebara, H. Hashizume.
    • A fundamental research of mechanical lap joint of high-temperature superconducting conductor,
      [19th Topical Meeting on the Technology of Fusion Energy, Las Vegas, Nevada, USA, 2010/11/07-11]
      Y. Uchida, S. Ito, H. Hashizume.
    • Thermonuclear analysis of flibe blanket with Cs,
      [19th Topical Meeting on the Technology of Fusion Energy, Las Vegas, Nevada, USA, 2010/11/07-11]
      H. Hashizume, N. Yusa, K. Matsui.
    • Status of High Temperature Superconducting Magnet Development,
      [19th Topical Meeting on the Technology of Fusion Energy, Las Vegas, Nevada, USA, 2010/11/07-11]
      L. Bromberg, H. Hashizume, S. Ito, J.V. Minervini, N. Yanagi.
    • Feasibility of a remountable high-temperature superconducting magnet for a helical fusion reactor,
      [20th International Toki Conference, Toki, 2010/12/07-10] S. Ito, H. Hashizume, H. Tamura, N. Yanagi, S. Imagawa, A. Sagara.

    2009

    [Journal]

    • Feasibility Study for Flibe TBM Based on Thermofluid Analysis,
      [Fusion Science and Technology 56(2) (2009), 892-896]
      H. Hashizume, K. Yuki, N. Seto, A. Sagara
    • Experimental Investigation of Flow Field Structure in Mixing Tee,
      [Journal of Fluids Engineering 131 (2009), 051103]
      SM. Hosseini, K. Yuki, H. Hashizume
    • Turbulent Heat Transfer in a Tube with Twisted Tape under a Magnetic Field.
      [Fusion Science and Technology,56(2),(2009),1033-1037] T. Yokomine, S. Ebara, S. Satake, T. Kunugi
    • Thermo-Hydraulic Design of High Flux Test Module for IFMIF-EVEDA in Japan.
      [Fusion Science and Technology,56(1),(2009),267-272] T. Yokomine, S. Ebara, A. Shimizu
    • Numerical Analysis for Thermal and Mechanical Properties of Pebble Bed.
      [Fusion Science and Technology,56(1),(2009),147-152] S. Ebara, Y. Harai, T. Yokomine and A. Shimizu
    • Electromagnetic nondestructive evaluation of rotating blades.
      [E-Journal of Advanced Maintenance, 1, (2009), 83-86] D. Kosaka, H. Huang, N. Yusa, K. Miya
    • 渦電流探傷法を用いた厚肉構造物の深い開口きず深さ定量評価.[機械学会論文集A, 75, (2009), 1454-1459]
      遊佐訓孝，ラディスラブヤノーセック，宮健三
    • Evaluation of stress corrosion cracking as a function of its resistance to eddy currents.
      [Nuclear Engineering and Design,239,(2009),2713-2718] N. Yusa, and H. Hashizume.
    • Discussion on the equivalent conductivity and resistance of stress corrosion cracks in eddy current simulations.
      [NDT&E International,42(1),(2009),9-15] N. Yusa and K. Miya
    • Some advances in numerical analysis techniques for quantitative electromagnetic nondestructive evaluation.
      [Nondestructive Testing and Evaluation, 24(1),(2009),69-102] Z. Chen, N. Yusa, K. Miya
    • Development of computational inversion techniques to size cracks from eddy current signals.
      [Nondestructive Testing and Evaluation,24(1),(2009),39-52] N. Yusa
    • Mechanical butt joint of laminated HTS cable with metal jacket for remountable HTS magnet.
      [IEEE Transactions on Applied Superconductivity 19 (2009), 1536-1539] S. Ito, T. Kato, H. Hashizume

    2008

    [Journal]

    • Influence of secondary flow generated in a 90-degree bend on the thermal hydraulic characteristics in a mixing tee.
      [Nuclear Science and Engineering 158 (2008), 194-202]
      K. Yuki, Y. Sugawara, SM. Hoseini, H. Hashizume, M. Tanaka
    • Heat transfer enhancement in sphere-packed pipes under high Reynolds number conditions.
      [Fusion Engineering and Design 83(7) (2008), 1102-1107]
      N. Seto, K. Yuki, H. Hashizume, A. Sagara
    • Numerical investigation of thermofluid flow characteristics with phase change against high heat flux in porous media.
      [Journal of Heat Transfer 130(1) (2008), 012602.1-012602.12]
      K. Yuki, J. Abei, H. Hashizume, S. Toda
    • Flow visualization and heat transfer characteristics for sphere-packed pipes.
      [Journal of Thermophysics and Heat Transfer 22(4) (2008), 638-648]
      K. Yuki, M. Okumura, H. Hashizume, S. Toda, NB. Morley, A. Sagara
    [International Conference / Proceedings ]
    • Visualization of supersonic gas-liquid two-phase flow affecting wall thinning events in the downstream straight and curved pipes of an orifice.
      [Proceedings of the 7th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety NUTHOS-7,(2008),1-4]
      Y. Abe, K. Yuki, H. Hashizume, S. Toda
    • Matched refractive-index PIV measurement of complex flow structure in a two-dimensional dual elbow.
      [Proceedings of the 7th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety NUTHOS-7,(2008),1-4]
      K. Yuki, K. Yoshida, H. Hashizume, S. Toda
    • Mechanical butt joint of HTS cable with DFRP forremountable HTS magnet.
      [Proceedings The 16th Pacific Basin NuclearConference, (2008)]
      S. Ito, H. Hashizume
    • Feasibility study of Flibe TBM baaed on thermofluid analysis.
      [Proceedings of 18th Topical meeting on the Technology of Fuison Energy,(2008),1-5]
      H. Hashizume, K. Yuki, N. Seto, A. Sagara
    • Specificity of flow structure in a dual elbow and its Visualization by PIV Measurement.
      [Proceedings of 16th International Conference on Nuclear Engineering ICONE16,(2008),1-6]
      K. Yoshida, Y. Kazuhisa, H. Hashizume, S. Toda

    2007

    [Journal]

    • Characteristic evaluation of mechanical jointed HTS cable for remountable HTS magnets.
      [Fusion Science and Technology 52(4) (2007), 1070-1074]
      S. Ito, S. Takami, H. Hashizume, Y. Yamamoto, K. Yuki, A. Sagara
    • Reproduction of behavior of 2-D channel flow with two rods by using k-e model.
      [Fusion Science and Technology 52(4) (2007), 817-820]
      M. Satake, K. Yuki, H. Hashizume
    • Heat Transfer performance for high Prandtl and high temperature molten salt flow in sphere-packed pipes.
      [Fusion Science and Technology 52(3) (2007), 618-624]
      T. Satoh, K. Yuki, S. Chiba, H. Hashizume, A. Sagara.
    • Evaluation of HTS butt-jointing performance, focusing on the joint stress distribution.
      [International Journal of Applied Electromagnetics and Mechanics 25(1) (2007), 281-286]
      S. Takami, H. Hashizume, S. Ito, Y. Yamamoto
    • Effect of surface angle on mechanical jointing of HTS.
      [International Journal of Applied Electromagnetics and Mechanics 25(1) (2007), 257-260]
      Y. Yamamoto, S. Takami, S. Ito, K. Yuki, H. Hashizume
    [International Conference / Proceedings ]
    • Heat removal performance of particle-sintered porous media counter to heat flux input and its phase change characteristics.
      [Proceedings of Second International Conference on Porous Media and Its Applications in Science, Engineering and Industry, (2007)]
      K. Yuki, A. Matsui, H. Hashizume
    • Control technique of High-Cycle thermal fatigue at a mixing tee with a 90-degree bend upstream by changing its location.
      [Proceedings of 15th International Conference on Nuclear Engineering, ICONE15, (2007)]
      H. Ohara, K. Yuki, SM. Hoseini, H. Hashizume, M. Tanaka.
    • Evaluation ofcircumferential crack location in pipes by electromagnetic waves.
      [Electromagnetic Nondestructive Evaluation (X), 117-124]
      K. Abbasi, S. Ito, H. Hashizume, K. Yuki

    2006

    [Journal]

    • Butt jointing performance for remountable HTS magnet by improving contact surfacecondition.
      [Fusion Engineering and Design 81 (2006), 1491-1496]
      S. Ito, H. Hashizume, K. Yuki, S. Takami, Y. Yamamoto.
    • Numerical research on heat transfer enhancement for high Prandtl-number fluid.
      [Fusion Engineering and Design 81 (2006), 513-517]
      S. Chiba, K. Yuki, H. Hashizume, S. Toda, A. Sagara
    • Numerical and experimental research to solve MHD problem in liquid blanket system.
      [Fusion Engineering and Design 81 (2006), 1431-1438]
      H. Hashizume
    • Overview of fundamental study on remountable HTS magnet.
      [Fusion Engineering and Design 81 (2006), 2527-2533]
      S. Ito, H. Hashizume
    [International Conference / Proceedings ]
    • Development of an advanced cooling device using porous media with active boiling flow counter to high heat flux.
      [International Heat Transfer Conferences IHTC13 (2006), -boi-58]
      S. Toda, K. Yuki, S. Ebara, Y. Kunikata, J. Abei and H. Hashizume
    • Experimental Investigation of Thermal-Hydraulic Characteristics at a Mixing Tee.
      [International Heat Transfer Conferences IHTC13 (2006),-fcv-17]
      SM. Hoseini, K. Yuki, Y. Sugawara, H. Hashizume, M. Tanaka
    • Advanced heat removal system with porous media for electronic devices.
      [9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference (2006), -Tracking No.55838]
      T. Yao, K. Yuki, S. Takiguchi, H. Hashizume
    • Flow visualization and heat transfer characteristics for sphere-packed pipes.
      [9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference,(2006),-Tracking No. 54264]
      K. Yuki, M. Okumura, N. Seto, H. hashizume, S. Toda, NB. Morley, A.Sagara

    2005

    [Journal]
    • Experimental study on NDT method using electromagnetic waves.
      [Journal of Materials Processing Technology 161 (2005), 348-352]
      T. Shibata, H. Hashizume, S. Kitajima, K. Ogura
    • Joint performance of HTc superconductor for remountable magnet system.
      [Fusion Science and Technology 47(4) (2005), 901-905]
      H. Hashizume, S. Ito, S. Takami, A. Sagara
    • Heat Transfer Enhancement Technique with copper porus media.
      [Fusion Science and Technology 47 (2005), 740-745]
      H. Togashi, K. Yuki, H. Hashizume
    • Experimantal research on heat transfer enhancement for high Prandtl-number fluid.
      [Fusion Science and Technology 47 (2005), 569-573]
      S. Chiba, M. Omae, K. Yuki, H. Hashizume, S. Toda, A. Sagara
    • Evaluation of flow structure in packed-bed tube by visualization experiment.
      [Fusion Science and Technology 47(4) (2005), 1089-1093]
      M. Okumura, K. Yuki, H. Hashizume, A. Sagara
    • Super-High heat flux removal using sintered metal porous media.
      [Journal of Thermal Science 14(3) (2005), 272-280]
      K. Yuki, J. Abei, H. Hashizume, S. Toda
    [International Conference / Proceedings ]
    • The three-dimensional study of flow mixing phenomenon in a T-junction area with 90-degree bend upstream.
      [International Conference Nuclear Energy for New Europe 2005, (2005)]
      SM. Hoseini, K. Yuki, H. Hashizume, M. Tanaka.
    • Critical heat flux of mist-cooling under high heat flux condition and its enhancement with surfactant.
      [The Sixteenth International Symposium on Transport Phenomena (ISTP-16) (2005), TPF-P4]
      K. Yuki, A. Kamahora, H. Hashizume, S. Toda
    • Effect of nano-scale surface conditions for boiling heat transfer.
      [ASME Summer Heat Transfer Conference (2005)]
      S. Chiba, K. Yuki, H. Hashizume, S. Toda

    2004

    [Journal]

    • Performance analysis of butt jointing in remountable HTc superconducting magnet.
      [International Journal of Applied Electromagnetics and Mechanics 19 (2004), 467-472]
      S.Ito, H. Hashizume, T.Yamauchi
    • New concept of the first wall to reduce MHD pressure drop.
      [International Journal of Applied Electromagnetics and Mechanics 19 (2004), 619-623]
      H. Hashizume, Y.Usui, S. Kitajima, A. Sagara
    • ９０度ベンドで発生する二次流れ非定常減衰挙動.
      [日本機械学会論文集B編 70 (2004), 1163-1170]
      結城和久, 熊野孝保, 戸田三朗, 橋爪秀利, 村松壽晴
    • Crack Detection Method using Electromagnetic Waves.
      [International Journal of Applied Electromagnetics 20 (2004), 171-178]
      H. Hashizume, T. Shibata, K. Yuki
    [International Conference / Proceedings ]
    • Depedence of Joinitng Resistance on Trasnport Current in HTc SC Tape.
      [Third JNZ Joint Seminar,(2004),31] S. Itoh, H. Hashizume
    • Progress in Butt Jointing Perfomance for Remountable HTc SC Magnet.
      [Third JNZ Joint Seminar,(2004),27] S. Takami, H. Hashizume, S. Itoh, K. Yuki
    • Numerical simulation on heat transfer enhancement in twisted-tape-inserted tubes.
      [Proceedings of the International Symposium on Heat Transfer Enhancement and Energy Conservation,2,(2004),787-794]
      K. Yuki, C. Sato, H. Hashizume, S. Toda
    • High heat flux removal by using sintered metal porous media.
      [6th International symposium on heat transfer,(2004)] K. Yuki, J. Abei, H. Hashizume, S. Toda
    • Thermo-fluid analysis of two-phase flow with phase-change against internse heat in porous media.
      [3rd International Symposium on Heat Transfer Enhancement and Energy Conservation,1,(2004),319-327]
      J. Abei, K. Yuki, H. Hashizume, S. Toda
    • New crack detection method by using electromagnetic wave.
      [ASME PVP-11,(2004)] H. Hashizume, T. Shibata, K, Yuki, T. Yoshioka
    • New crack detection method by using electromagnetic wave.
      [ASME/JSME Pressure Vessels and Piping Conference,484,(2004),229-234]
      H. Hashizume, T. Shibata, K. Yuki, T. Yoshioka
    • Advanced nuclear engineering research for both fusion and fission reactors.
      [2nd International Conference on Nuclear Science and Technology,(2004)] H. Hashizume, S. Toda

    2003

    • Numerical Analysis of MHD turblent Flow using Mixing Length Model.
      [ASAEM2003,(2003),8] H. Hashizume, M. Satake, K. Yuki
    • Investigation of non-isothermal fluix mixing and wall temperature fluctuation in at-junction which has a 90-degree bend in the upstrem area.
      [NURETH-10(CDROM),(2003),1-12] K. Yuki, K. Okuyama, S. Toda, H. Hashizume, T. Muramatsu
    • 保全を考慮した核融合炉原型炉の経済性評価.[保全学,2(1),(2003),43-48] 橋爪秀利，北郷和寿
    • Cost Assessment of Fusion Reactor with External Conductor Systems.
      [Fusion Science and Technology,44(2),(2003),284-288] H.Hashizume, K.Kitagoh, S.Kitajima, A.Sagara
    • Fundamental Study of NDT method using electromagnetic waves.
      [Studies in Applied Electromagnetics and Mechanics,24,(2003),263-270]
      H. Hashizume, T.Shibta, S.Kitajima, Y.Uchigaki, K.Ogura

    2002

    • Proposal of mechanically jointed superconducting magnet using high critical temperarure superconductors.
      [Fusion Engineering and Design,63,(2002),449-454] H. Hashizume, S.Ito, K.Yagi, S.Kitajima
    • Advanced fusion reactor design using remountable HTc S.C. magnet.
      [J. Plasma Fusion Res. SERIES,5,(2002),532-536] H. Hashziume, S. Kitajima, S.Ito, K. Yagi, Y. Usui, Y. Hida
    • Numerical analysis of MHD flow in remountable first wall.
      [Fusion Engineering and Design,61,(2002),251-254] H. Hashizume, Y. Usui, S. Kitajima, Y.Hida, A.Sagara
    • Equilibrium Calculation of Tohoku University Heliac.
      [J. Plasma Fusion Res. SERIES,5,(2002),500-504] K. Harada, S. Kitajima and H. Hashizume

    2001

    • Study on mechanical jointing of high temperature superconductors.
      [International Jpurnal of Apllied Electromagnetics and Mechanics,14,(2001),85-88] S.Ito, H.Hashizume, S.Kitajima
    • New model for two-dimensional analysis of electromagnetic field in high TC supercondcuting tapes.
      [Internation Journal of Applied Electromagnetics and Mechanics,14,(2001),81-84] H.Hashizume, M.Suzuki, S.Toda
    • Development of NDT method using electromagnetic waves.
      [JSAEM Studies in Applied Electromagnetics and Mechanics,10,(2001),313-316] K. Sugawara, H. Hashizume, S. Kitajima
    • Design and development of the Flibe blanket for helical-type fusion reactor FFHR.
      [Fusion Engineering and Design,49,(2001),661-666] A.Sagara, H.Yamanishi, S.Imagawa, T.Muroga, T.Uda, T.Noda,
      S.Takahashi, K.Fukumoto, Y.Yamamoto, H.Matsui, A.Koyama, H.Hsshizume, S.Toda, A.Shimizu, A.Suzuki, Y.Hosoya,
      S.Tanaka, T.Terai. Dai-Kai Sze, O.Motojima
    • Charactersitics of Magnetic Surface Quantities in the Heliac Plasma.
      [JSAEM Studies in Applied Electromagnetics and Mechanics,10,(2001),428-431] K. Harada, S. Kitajima, H. Hashizume
    • Radial Electric Field Control with a Biased Hot Cathode in the Tohoku University Heliac.
      [J. Plasma Fusion Res. SERIES,4,(2001),391-394] S.Kitajima, S.Nakanishi, K.Harada, K.Sugawara, H.Hashizume
    • Radial electric field control by electron injection in Tohoku University Heliac.
      [International Journal of Applied Electromagnetics and Mechanics,13,(2001),381-385] S.Kitajima, S.Nakanishi, H.Hashizume

    2000

    • Application of Porous Matrix to High Heat Load Removal.
      [Heat and Mass Transfer,36,(2000),273-276] S.Ebara, S.toda and H.Hahsizume

    1999

    • Vibration characteristics of Heated Rod Induced by Subcooled Flow Boiling.
      [Jounal of Nuclear Science and Technology,36(7),(1999),575-583] M.R.Mematrollahi, S.Toda, H.Hashizume and K.Yuki

    1998

    • Proposal of a New Superconducting Wire for Magnets of a Fusion Reactor.
      [Fusion Engineering and Design,41,(1998),283-290] H. Hashizume and S. Toda
    • Interfilament coupling loss for protection of superconducting mutlicoil magnets.
      [Cryogenics,38(4),(1998),367-376] K.Takeuchi, Y.K.Kang, H.Hashizume and Y.Iwasa
    • Electromagnetic Analysis of Low/high Tc Superconducting Wire.
      [IEEE Transaction on Magnetics,34(5),(1998),3016-3019] H. Hahsizume and S. Toda
    • Unsteady Heat Transfer of Steam Flow with Condensation in Porous Media.
      [Proceedings of the 11th International Heat Transfer Conference,6,(1998),463-468]
      S.Toda, W.S.Hsu, H.Hashizume and T.Kawaguchi
    • Fundamental Study on High Heat Flux Removal System Using Evaporated Fluid in Metal Porous Media.
      [Proceedings of the 11th International Heat Transfer Conference,4,(1998),503-508] S.Toda, S.and H.Hashizume
    • Moleculsr Dynamics study of Heat and Mass Transfer for Disruption Erosion.
      [Proceedings of the 11th Internation Heat Transfer Conference,4,(1998),271-275] H.Nakadate, S.Toda and H.Hashizume

    1997

    • Experimental Research of Water Ingress Event into a Vacuum Vessel of a Nuclear Fusion Reactor.
      [Eighth International Topical Meeting on Nuclear Reactor Thermal-Hydraulics,3,(1997),1328-1331]
      A.Jinzu, H.Hayakawa, H.Hashizume and S.Toda
    • A New Approach of Molecular Dynamics Method with a Divided Time Interval.
      [Proceedings of the Tenth International Conference for Numerical Methods in Thermal Problems,(1997),283-289]
      S.Toda,H.Nakadate and H.Hashizume
    • Molecular dynamics study on surface melting and evaporation under high enryg particle flex.
      [International Symposium on Advances in Comuational Heat Transfer,1,(1997),487-491] H.Nakadate,S.Toda and H.Hashziume
    • Molecular dynamics simulation on vapor shielding under high heat load.
      [International Symposium on Advances in Comutaional Heat Transfer,1,(1997),119-123] S.Toda,H.Nakadate and H.Hashizume
    • Gas Entrainment Induced by Vortex behaind an Obstacle.
      [Eighth International Topical Meeting on Nuclear Reactor Thermal-Hydraulics,3,(1997),1742-1746]
      T.Kumazawa, S.Ebara, H.Hashziume and S.Toda

    1996

    • Numerical Simulation of Fluxoid Dynamics by Molecular Dynamics Method.
      [JSAEM Stuedies in Applied Electromagnetics,4,(1996),96-102] H. Hashizume, S. Toda, T. Kurusu and K. Maeda
    • Three Dimensional Evaluation of Current Distribution in Twisted Superconductor.
      [IEEE Transactions on Magnetics,32(3),(1996),1152-1155] H. Hashizume and S. Toda
    • Numerical Evaluation of Electromagnetic Force Induced in High Tc Superconductor with Grain Boundary.
      [IEEE Transactions on Magnetics,32(3),(1996),1148-1151] H. Hashizume, S. Toda and K. Maeda
    • MHD Behavior of Liquid Metal under Transient Magnetic Fields.
      [JSAEM Studies in Applied Electromagnetics,4,(1996),103-110] H. Hashizume, S. Toda and K. Mano
    • Fundamental Study on Thermal Hydraulics across the Two-phase Interface with Melting and Gas Releasing in MCCI.
      [Proceedings of JAPAN-U.S. Seminar on Two-Phase Flow Dynamics,(1996),15-20]
      Yukihiro Katsumura and Saburo Toda Hidetoshi Hashizume
    • Numerical Analysis of Fluid Flow with Free Surface and Phase Change under Electromagnetic Force.
      [IEEE Transactions on Magnetics,32(3),(1996),1002-1005] Yukihiro Katsumura and Hidetoshi Hashizume Saburo Toda
    • 自由界面を伴う流体と溶融する固体面の熱伝達数値解析.
      [第３３回日本伝熱シンポジウム講演論文集,2,(1996),697-698] 勝村幸博，橋爪秀利，戸田三朗

    1995

    • Numerical Evaluation of A.C. Losses in Superconductor by Introducing Twisted Coordinates.
      [Elsevier Studies in Applied Electromagnetics in Materials,6,(1995),375-378] H. Hashizume and S. Toda
    • 自由界面と相変化を伴う流体の熱流動解析.
      [第３２回日本伝熱シンポジウム講演論文集,2,(1995),409-410] 勝村幸博，橋爪秀利，戸田三朗
    • Influence of Obastractions on the Initiataion of Subcooled Boiling in an Annular Channel.
      [Convetctive Flow Boiling, Proceeding of Convective Flow Boiling,(1995),79-84]
      S. Toda,H. Hashizume,Y.Fujiwara,J.Ogawa and M. Mori
    • Fundamental Study on Heat Transfer across the Interface with Melting and Gas Releasing in Molten Core/Concrete Interaction.
      [Proceedings of the ASME/JSME Thermal Engineering Joint Conference 1995,4,(1995),483-490]
      Yukihiro Katsumura, Saburo Toda and Hidetoshi Hashizume

    1994

    • Improvement of numerical scheme to calculate electromagnetic fields in type-II superconductors (quasi 3-D analysis).
      [Elsevier Studies in Applied Electromagnetics in Materials,5,(1994),293-296] H. Hashizume and S. Toda
    • Transient Thermal Electromagnetic Behaviors in Type-II Superconductors during Quenching.
      [Proceedings of the Tenth International Heat Transfer Conference,3,(1994),191-196] H. Hashizume, T. Kurusu and S. Toda
    • 電磁場による流れ場の数値解析.
      [日本機械学会熱工学講演会論文集,1994/11/24-25,仙台,(1994),137-139] 勝村幸博，橋爪秀利，戸田三朗
    • Quasi Three-dimensional Analysis of A.C. Losses in Superconductor.
      [IEEE Transactions on Magnetics,30(5),(1994),3088-3091] H. Hashizume and S. Toda
    • 流れ場と電磁場の連成問題の数値解析.
      [第６回電磁力関連のダイナミックスシンポジウム講演論文集,(1994),173-176] 勝村幸博，橋爪秀利，戸田三朗
    • Three-Dimensional Natural Convection Heat Transfer inside a Vertical Cylinder Containing Eccentrically Distributed
      Internal Heat Source. [Proceedings of the Tenth International Heat Transfer Conference,3,(1994),251-256]
      S. Toda, K. Takeuchi, N. Naitoh and H. Hashizume
    • 移動境界(自由表面・相変化)を伴う流体の熱流動解析.
      [日本機械学会論文集Ｂ編,60(573),(1994),1612-1618] 勝村幸博，橋爪秀利，戸田三朗

    1993

    • 超電導体における３次元電流分布の解析.
      [電気学会研究界資料（回転機静止器合同研究会）,RM-93(57),(1993),9-18] 橋爪秀利，戸田三朗
    • Coupled Thermo-Electromagnetic Analysis of Type-II Superconductors.
      [IEEE Transactions on Magnetics,29(2),(1993),1550-1553] T. Kurusu, H. Hashizume and S. Toda
    • Study of thermal fluid leaking between piping and insulator : Basic experiment by air.
      [Proceedings of the 2nd. ASME/JSME Nuclear Engineering,(1993),131-134] S. Toda, W. Hsu, H. Hashizume and Y. Hori
    • Heat transfer between fluid with free surface and melted solid wall.
      [Nuclear Engineering and Design,141(1),(1993),47-58] S. Toda, Y. Katsumura, H. Hashizume and M. Okuyama
    • 溶融炉心/コンクリ-トの熱伝達模擬実験.
      [第３０回日本伝熱シンポジウム講演論文・W,3,(1993),862-864] 勝村幸博，川口孝弘，橋爪秀利，戸田三朗
    • 単一液滴の凝固.[第３０回日本伝熱シンポジウム講演論文集,3,(1993),856-858] 勝村幸博，橋爪秀利，戸田三朗

    1992

    • 超電導体における電磁場・熱場解析(II)-電磁場と熱場の連成問題-.
      [電気学会研究界資料（回転機静止器合同研究会）,RM-92(118),(1992),85-93] 来栖努，橋爪秀利，戸田三朗
    • 超電導体における電磁場・熱場解析(I)-電磁場の解析について-.
      [電気学会研究会資料（回転機静止器合同研究会）,RM-92(117),(1992),75-84] 橋爪秀利，来栖努，戸田三朗
    • Numerical analysis of current distribution in type-II superconductors based on T-method.
      [Int. J. Appl. Electromagnetics Mater.,3(3),(1992),205-213] H. Hashizume, T. Kurusu and S. Toda
    • Numerical analysis of electromagnetic phenomena in superconductors.
      [IEEE Transactions on Magnetics,28(2),(1992),1332-1335] H. Hashizume, T. Sugiura, K. Miya and S. Toda
    • Thermal and stress analysis of the firdt wall with asymmetrically heated non-circular coolant channels.
      [Nuclear Engineering and Design/Fusion,15,(1992),245-253]
      T. Takeda, M. Seki, H. Kawamura, H. Hashizume and K. Miya
    • Numerical and Experimental Analysis of Eddy Current Testing based on T-method.
      [Elsevier Studies in Applied Electromagnetics in Materials,1,(1992),219-222]
      Y. Yamada, H. Hashizume, K. Miya K. Morimoto K. Satake and N. Shimizu
    • Numerical simulation of molten flow with free surface under A.C. magnetic field.
      [Elsevier Studies in Applied Electromagnetics in Materials,1,(1992),59-62] Y. Yoshida, H. Hashizume, K. Miya and T. Nasada
    • 自由界面をもつ流体と固体面の溶融を伴う熱伝達.
      [第２９回日本伝熱・Vンポジウム講演論文集,(1992),775-776] 戸・c三朗，勝村幸博，橋爪秀利
    • Numerical and experimental analysis of eddy current testing for a tube with cracks.
      [IEEE Transactions on Magnetics,28(2),(1992),1469-1472] H. Hashizume, Y. Yamada, K. Miya and S. Toda

    1991

    • Numerical electromagnetic field analysis of type-II superconductor.
      [Int. J. Appl. Electromagnetics Mater.,2,(1991),183-196] T. Sugiura, H. Hashizume and K. Miya
    • Numerical Analysis of A.C. Loss in Superconductor.
      [Cryogenics,31,(1991),601-606] H. Hashizume, T. Sugiura, K. Miya, Y. Ando, S. Akita, Y. Kubota and T. Ogasawara
    • Development of plasma facing components at JAERI.
      [Fus. Engrg. Des.,18,(1991),99-104]
      M. Akiba, H. Takatsu, T. Kuroda, H. Hashizume, M. Araki, M. Dairaku, H. Ise, S. Suzuki, S. Tanaka, K. Yokoyama and M. Seki
    • Numerical and experimental eddy analyses of complex first wall components of a fusion reactor.
      [Fus. Engrg. Des.,16,(1991),369-375] M. Tsuchimoto, M. Fukaya, M. Hashimoto, H. Hashizume, K. Miya and M. Seki

    1990

    • Mechanical and thermal behavior of multi layer plates simulationg superconducting laminated structure.
      [Mechanical Modellings of New Electromagnetic Materials, IUTAM, 1990,(1990),27-34]
      T. Takagi, Y. Hamaoka, H. Hashizume, K. Miya and J. Tani
    • Experimental and Numerical Analysis of Eddy Currents in the First Wall of a Fusion Reactor.
      [IEEE Transactions on Magnetics,26,(1990),869-872] M. Hashimoto, H. Hashizume, T. Sugiura, T. Takagi, K. Miya and M. Seki
    • T法に基づいた薄板強磁性体の渦電流解析.
      [電気学会研究会資料（回転機静止器合同研究会）,RM-90(47),(1990),107-112] 槌本昌則，橋爪秀利，宮健三
    • 電磁界解析における積分方程式について.
      [電気学会研究会資料（回転機静止器合同研究会）,RM-90(29),(1990),31-40] 橋爪秀利，宮健三

    1989

    • Structural Characteristics and the Influence of Mechanical Disturbance in Superconducting Toroidal Coils.
      [11th International Conference on Magnet Technology (MT-11), August 28-September 1, 1989, Tsukuba.,1,(1989),680-685]
      Y. Kannoto, H. Hashizume, M. Minami, K. Hayakawa, T. Takagi and K. Miya
    • Magnetothermohydraulic Behavior of the Molten Layer of a First Wall Due to Plasma Disruption.
      [Fus. Engrg. Des.,9,(1989),219-224] H. Hashizume, Y. Yoshida, K. Miya and K. Ioki
    • Probabilistic Lifetime Evaluation of the Fusion First Wall.
      [Fus. Engrg. Des.,9,(1989),75-80] H. Oomura, T. Takagi, H. Hashizume and K. Miya
    • Electromagneto-Thermomechanical Behavior of the First Wall.
      [Fus. Engrg. Des.,7,(1989),293-321] H. Hashizume and K. Miya
    • Mechanical Design of a Solid Breeder Blanket Canister for ITER.
      [Transactions of the 10th International Conference on Structural Mechanics in Reactor Technology, August 14-18,
      1989, Anaheim.,N,(1989),1-6] H. Hashizume, A.Y. Ying, A.R. Raffray and M.A. Abdou

    1988

    • Study on the Prediction of Quench Occurrence in Superconducting Coils.
      [IEEE Transactions on Magnetics,24,(1988),1548-1551] K. Miya, H. Yanagi, H. Hashizume and Y. Hamaoka
    • Application of T-Method to A.C. Problem Based on Boundary Element Method.
      [IEEE Transactions on Magnetics,24,(1988),134-137] K. Miya and H. Hashizume

    1987

    • 超電導マグネットにおける機械的擾乱による熱発生の定量化.
      [電気学会研究会資料（回転機静止器合同研究会）,RM-87(71),(1987),159-168]
      浜岡豊，橋爪秀利，染谷和良，高木敏行，宮健三
    • Three Dimensional Analysis of an Eddy Current by the T-Method.
      [Electromagnetomechanical Interactions in Deformable Solids and Structures,(1987),183-189]
      K. Miya, T. Sugiura and H. Hashizume
    • Theremomechanical Behavior of the First Wall Subjected to Plasma Disruption.
      [Fus. Engrg. Des.,5,(1987),141-154] H. Hashizume, K. Miya, M. Seki and K. Ioki
    • Themomechanical Analysis of a Duplex Plate Subjected to a Plasma Major Disruption.
      [Transactions of the 9th International Conference on Structural Mechanics in Reactor Technology, August 17-21,
      1987, Lausanne.,N,(1987),81-86] M. Akiyama, K. Miya, H. Hashizume and K. Ioki
    • 境界要素法を用いたT法による渦電流解析.
      [電気学会研究会資料（回転機静止器合同研究会）,RM-87(78),(1987),57-66] 橋爪秀利，宮健三
    • 三次元渦電流解析手法T法の理論的背景について.
      [電気学会研究会資料（回転機静止器合同研究会）,RM-87(77),(1987),47-56] 宮健三，橋爪秀利，杉浦壽彦
    • 三次元渦電流解析手法T法の高速化と高精度化.
      [電気学会研究会資料（回転機静止器合同研究会）,RM-87(76),(1987),37-46] 宮田浩一，杉浦壽彦，橋爪秀利，宮健三
    • 渦電流探傷法の解析と応用.
      [電気学会研究会資料（回転機静止器合同研究会）,RM-87(67),(1987),67-76]
      橋本光男，宮田浩一，杉浦壽彦，橋爪秀利，宮健三

    1986

    • Theoretical and Experimental Study on Magnetically Guided Liquid Metal Flow in a Inertial Fusion Reactor.
      [4th International Conference on Emerging Nuclear Energy Systems, June 30-July 4, 1986, Madrid.,(1986),377-380]
      T. Iizuka, M. Miya, H. Hashizume and K. Someya
    • Thermal and Stress Analysis of a Fusion Reactor First Wall with Non-Circular Coolant Channels.
      [Proceedings of International conference on Computational Mechanics, May 25-29, 1986, Tokyo.,2,(1986),VIII･97-102]
      M. Seki, T. Takeda, H. Kawamura, H. Hashizume and K. Miya
    • ３次元渦電流解析とゲ-ジについて.
      [電気学会研究会資料（回転機静止器合同研究会）,RM-86-41,(1986),1-10] 橋爪秀利，杉浦壽彦，宮・EE虫O

    1985

    • マイクロコンピュ-タを利用した高温クリ-プ条件下におけるC*一定制御実験.
      [日本機械学会論文集Ａ編,51(461),(1985),254-257] 矢川元基,橋爪秀利,福田俊彦,黒沢正蔵



    • [Index]