Original Papers 2001

---

1. Microwave Sensor for Nondestructive Inspection [Inspection Engineering, 6 (1), (2001), 4 - 8]
   Y. Ju and M. Saka
   
   Microwave Imaging for the Integrity Assessment of IC Packages [ASME Trans. Journal of Electronic Packaging, 123 (1), (2001), 42 - 46]
   Y. Ju, M. Saka and H. Abé
   
   
2. Detection of Delamination in IC Packages Using the Phase of Microwaves [NDT & E International, 34 (1), (2001), 49 - 56]
   Y. Ju, M. Saka and H. Abé
   
   
3. Nondestructive Inspection of Delamination in IC Packages by High-Frequency Microwaves [NDT & E International, 34 (3), (2001), 213 - 217]
   Y. Ju, M. Saka and H. Abé
   
   
4. Microwave Measurement of Moisture in Encapsulant Resin of IC Packages [Nondestructive Characterization of Materials X,Elsevier Science, (2001), 129 - 132]
   Y. Ju, S. Sanpei, M. Saka and H. Abé
   
   
5. Recycling Technique for CVD Diamond Coated Cutting Tools [Surface and Coatings Technology, 137, (2001), 246 - 248]
   H. Liu, H. Hanyu, Y. Murakami, S. Kamiya and M. Saka
   
   
6. Development of Focusing Sensor for Microwave Nondestructive Inspection [Journal of JSNDI, 50 (6), (2001), 392 - 397]
   Y. Ju, K. Saruta, M. Saka and H. Abé
   
   
7. De-coating Technique for CVD Diamond Coatings and Evaluation of Performance for Recycled Cutting Tools, 67 (6), (2001), 937 - 940]
   H. Liu, H. Hanyu, Y. Murakami, S. Kamiya and M. Saka
   
   
8. Backside Damage Introduced by Cavitating Jet for Gettering [Proc. of IPACK'01, The Pacific Rim/ASME International Electronic Packaging Technical Conference and Exhibition, July 8-13, 2001, Kauai, Hawaii, USA (CD-ROM),, (2001)]
   H. Kumano, H. Soyama and M. Saka
   
   
9. Verification of the Governing Parameter for Electromigration Damage in Passivated Polycrystalline Line [Proc. of IPACK'01, The Pacific Rim/ASME International Electronic Packaging Technical Conference and Exhibition, July 8-13, 2001, Kauai, Hawaii, USA (CD-ROM),, (2001)]
   K. Sasagawa, M. Hasegawa, M. Saka and H. Abé
   
   
10. Possibility of Gettering Silicon Wafer by Using a CaVitating Jet [Journal of Jet Flow Engineering, 18 (2), (2001), 4 - 9]
    H. Kumano, H. Soyama and M. Saka
    
    
11. Peening by the Use of Cavitation Impacts for the Improvement of Fatigue Strength [Journal of Mareials Science Letters, 20 (13), (2001), 1216 - 1265]
    H. Soyama, T. Kusaka and M. Saka
    
    
12. Cavitating Jet Peening for the Improvement of Fatigue Strength [Materials Science Research International, Special Technical Publication, 1, (2001), 216 - 219]
    H. Soyama, K. Sasaki, H. Kumano and M. Saka
    
    
13. Cure Shrinkage Analisis of Epoxy Molding Compound [Polymer Engineering and Science, 41 (8), (2001), 1373 - 1379]
    K.Oota and M. Saka
    
    
14. Nondestructive Inspection of a Small Area Delamination in IC Packages by Microwave Imaging [Proc. of IPACK'01, The Pacific Rim/ASME International Electronic Packaging Technical Conference and Exhibition, July 8-13, 2001, Kauai, Hawai, USA(CD-ROM),, (2001)]
    Y. Ju, M. Saka and H. Abé
    
    
15. Microwave Nondestructive Evaluation of a Closed Fatigue Crack on the Metal Surface [Journal of JSNDI, 50 (9), (2001), 607 - 611]
    M. Saka, Y. Ju, D. Luo and H. Abé
    
    
16. NDI of Delamination in IC Packages Using Millimeter-Waves [IEEE Transactions on Instrumentation and Measurement, 50 (4), (2001), 1019 - 1023]
    Y. Ju, M. Saka and H. Abé
    
    
17. Influence of Crack Length on the Ultrasonic Evaluation of Depth of Small Surface Cracks [Proc. of APCFS & ATEM'01, JSME-MMD, October 20-22, 2001, Sendai, Japan, 1, (2001), 253 - 257]
    S. R. Ahmed and M. Saka
    
    
18. Toward a Sensitive Detection and Sizing of Small Closed Cracks by Ultrasonic Shear Waves [Proc. of APCFS & ATEM'01, JSME-MMD, October 20-22, 2001, Sendai, Japan, 1, (2001), 258 - 263]
    M. A. S. Akanda and M. Saka
    
    
19. A Method of Sizing Small Fatigue Crack in Stainless Steel by Microwaves [Proc. of APCFS & ATEM'01, JSME-MMD, October 20-22, 2001, Sendai, Japan, 1, (2001), 286 - 291]
    M. Saka, Y. Ju, D. Luo and H. Abé
    
    
20. Evaluation of Peening Intensity of Cavitation Shotless Peening by Using Almen Strip [Proc. of APCFS & ATEM'01, JSME-MMD, October 20-22, 2001, Sendai, Japan, 2, (2001), 1047 - 1050]
    H. Soyama, H. Kumano, K. Saito and M. Saka
    
    
21. High Temperature Storage Life Study On Epoxy Molding Compound With Red Phosphorous Flame Retardant For Electronic Devises [J. Materials Science Society of Japan, 38 (4), (2001), 137 - 143]
    K. Oota, N. Shashida, T. Suzuki, S. Deguchi, M. Saka
    
    
22. De-coating Technique For CVD Diamond Coatings And Evaluation Of Performance For Recycled Cutting Tools [Journal of JSPE, 67 (6), (2001), 937 - 940]
    H. Liu, H. Hanyu, Y. Murakami, S. Kamiya and M. Saka
    
    
23. Development of Focusing Sensor For Microwave Nondestructive Inspection [Journal of JSNDI, 50 (6), (2001), 392 - 397]
    Y. Ju, K. Saruta, M. Saka, H. Abé
    
    
24. Microwave Nondestructive Evaluation Of A Closed Fatigue Crack On The Metal Surface [Journal of JSNDI, 50 (9), (2001), 607 - 611]
    M. Saka, Y. Ju, D. Luo and H. Abé
    
    
25. Effects of Corner Position and Operating Condition on Electromigration Failure in Angled Bamboo Lines without Passivation Layer [Thin Solid Films, 401 (1-2), (2001), 255 - 266]
    K. Sasagawa, M. Hasegawa, K. Naito, M. Saka and H. Abé
    
    
    

---

Back
Top page